Development Boards / Other

We were catching up on a recent hackaday hackchat with eben upton and learned some fun facts: such as the DVI hack for the RP2040 was inspired by a device called the IchigoJam. we remember reading about this back when it was an LPC1114, now it uses an RP2040. well, we're wrapping up the Metro RP2350 and lately we've been joking around that with DVI output and USB...

ESP32-C6-WROOM-1-N8 is an ESP32-C6-based module, which supports WiFi 6 in a 2.4GHz band, Bluetooth® 5, Zigbee 3.0, and Thread. It's pin-to-pin compatible with the ESP32-WROOM series module. With low-power consumption, it is an ideal choice for a variety of IoT devices! This module comes with 8 MB Quad SPI Flash memory. Features: 32-bit RISC-V single-core...

The ESP32-C6-DevKitC-1-N8 is an entry-level development board equipped with ESP32-C6-WROOM-1, a general-purpose Wi-Fi + Bluetooth® LE RISC-V MCU module that integrates complete Wi-Fi and Bluetooth® LE functions. This board integrates complete Wi-Fi, Bluetooth® LE, Zigbee, and Thread functions. This version is equipped with the ESP32-C6-WROOM-1 with 8MB...

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-2, a general-purpose Wi-Fi + Bluetooth® Low Energy MCU module that integrates complete Wi-Fi and Bluetooth® LE functions. This version is equipped with the ESP32-S3-WROOM-2 (PCB antenna) with 32MB Flash and 8MB PSRAM. Please note: The S3 is similar to the ESP32-S2 - but...

The ESP32-C3-DevKitM-01 is an entry-level development board equipped with the ESP32-C3-MINI-01, a powerful, generic Wi-Fi + Bluetooth® LE MCU module that features a rich set of peripherals, yet an optimized size. It's an ideal choice for a wide variety of application scenarios related to the Internet of Things (IoT), such as embedded systems, smart homes,...

ESP32-H2-DevKitM-1 is an entry-level development board based on Bluetooth® Low Energy and IEEE 802.15.4 combo modules ESP32-H2-MINI-1. Most of the I/O pins on the ESP32-H2-MINI-1 module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-H2-DevKitM-1 on a...

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth® LE functions. This version is equipped with the ESP32-S3-WROOM-1 (PCB antenna) with 8MB Flash and 8MB PSRAM. Please note: The S3 is similar to the ESP32-S2 - but adds a dual...

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth® LE functions. This version is equipped with the ESP32-S3-WROOM-1 (PCB antenna) with 8MB Flash and 8 MB PSRAM. Please note: The S3 is similar to the ESP32-S2 - but adds a...

ESP32-C3-DevKit-RUST-1 is an entry-level RISC V development board equipped with the ESP32-C3-MINI-1, a powerful, generic Wi-Fi + Bluetooth® LE MCU module that features a rich set of peripherals, yet an optimized size. It's an ideal choice for a wide variety of application scenarios related to the Internet of Things (IoT), such as embedded systems, smart homes,...

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabilities to the next level with the ESP32 Development Board! The development board breaks out all the module’s pins to 0.1″ headers and provides...

The RockBLOCK 9603 allows you to send and receive short messages from anywhere on Earth with a clear view of the sky. And when we say anywhere we mean anywhere. It works far beyond the reach of WiFi and GSM networks. Maybe you want to transmit weather information from mid-ocean? Or use it to control your robot in the middle of the desert? Perhaps you need emergency...

ESP32-C6-WROOM-1-N4 is an ESP32-C6-based module, which supports WiFi 6 in a 2.4GHz band, Bluetooth® 5, Zigbee 3.0, and Thread. It's pin-to-pin compatible with the ESP32-WROOM series module. With low-power consumption, it is an ideal choice for a variety of IoT devices! This module comes with 4MB SPI Flash Features: 32-bit RISC-V single-core processor that...

The chipKIT uC32 is an open-source hardware prototyping platform that adds the performance of the Microchip PIC32 microcontroller. The uC32 is the same form factor as the Arduino™ Uno board. It features a USB serial port interface for connection to the IDE and can be powered via USB or an external power supply. The chipKIT uC32™ development board is the same form...

For PIC fans, or anyone who wants a dev board with a little more horsepower under the hood, the PIC32 Pinguino presents a step up from Arduino. This board is the same size and shape, but has a 32-bit microcontroller, running at 80 MHz with a huge amount of flash and RAM for intensive application. It also has some neat extras like a DC/DC converter input and a built...

Introducing the ProS3 - The Ultimate Pro ESP32-S3 Development Board The ProS3 ships with the latest version of CircuitPython with ESP32-S3 support. It also ships with the UF2 bootloader, so you can easily update your ProS3 with the latest CircuitPython firmware, whenever you desire. Just plug your ProS3 into your computer and it will appear in your filesystem as a...

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This version is equipped with the ESP32-S3-WROOM-1 (PCB antenna) with 8MB Flash and 2 MB PSRAM. Please note: The S3 is similar to the ESP32-S2 - but adds a dual core and...

The ESP32-S3-DevKitM-1 is an entry-level development board equipped with the ESP32-S3-MINI-1, a powerful, generic Wi-Fi + Bluetooth LE MCU module that features a rich set of peripherals, yet an optimized size. It's an ideal choice for a wide variety of application scenarios related to the Internet of Things (IoT), such as embedded systems, smart homes, wearable...

Discontinued - you can grab ESP32-S2 Kaluga Dev Kit featuring ESP32-S2 WROVER instead! Espressif's ESP32-S2 Human Machine Interface Dev Kit 1 (ESP32-S2-HMI-DevKit-1) has been specifically designed for human-machine interfaces in smart-home automation controllers, smart speakers with display, smart alarm clocks, etc. ESP32-S2-HMI-DevKit-1 is powered by the...

The Nordic Thingy:91 is an easy-to-use battery-operated prototyping platform for cellular IoT using LTE-M, NB-IoT, and GPS. It is ideal for creating Proof-of-Concept demos, and initial prototypes in your IoT development phase. Thingy:91 is built around the nRF9160 SiP and is certified for a broad range of LTE bands globally, meaning the Nordic Thingy:91 can be used...

The ESP32-S2-Kaluga-1 kit is a full featured development kit by Espressif for the ESP32-S2 that comes with everything but the kitchen sink! From TFTs to touch panels, this dev board has it all. Espressif designed this kit to demonstrate the ESP32-S2’s human-computer interaction functionalities and provide the users with the tools for development of...

Introducing the TinyS3 - The Tiny Mighty ESP32-S3 development board in the TinyPICO format! TinyS3 is the latest in Unexpected Maker's super popular range of "Tiny" development boards. It's packed with amazing features and peripherals, wireless connectivity, and stacks of Flash and PSRAM, all in the same tiny package size as the original TinyPICO! The TinyS3 ships...

The LightBlue Bean+ is a low energy Bluetooth Arduino microcontroller that is programmed wirelessly and is perfect for your smartphone controlled projects! With Bean, you can program wirelessly from any of your devices. Using Bluetooth 4.0, this Arduino-compatible board is a serial protocol that allows the LBM313 Bluetooth Low Energy module and Atmega328p to...

The Esquilo Air is everything you'll need to make any stand-alone internet enabled devices in a matter of minutes! This new generation of WiFi boards has a built in web-based IDE - that is, its on the board itself. Yet, its got the lightweight speed of an embedded Cortex M4 processor. This complete IoT development system comes equipped with 1MB of flash, 18 PWM...

The ESP32-S3-Korvo-2 is a multimedia development board based on the ESP32-S3 chip. It is equipped with a two-microphone array, which is great for voice recognition and near/far-field voice wake-up applications. The board can integrate multiple peripherals such as LCD, camera, and microSD card. It also supports JPEG video stream processing. With all of its outstanding...