Wearables

Build circuits into your clothing and accessories with wearables from Adafruit! This category has all the materials, boards, and sensors to help you create the wearable electronics of your dreams.

In addition to our FLORA and GEMMA sewable microcontrollers, Adafruit's wearables category includes conductive textiles, battery packs, sensors and LEDs, and all-in-one packs perfect for beginners and as gifts.

Check out the Adafruit Learn System to learn how to make a GPS enabled jacket so you'll never get lost again or a pair of gorgeous, glowing Firewalker Sneakers.

FLORA - Wearable electronic platform: Arduino-compatible - v3

PRODUCT ID: 659

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to...

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tutorials and projects. Check out dozens of FLORA tutorials on the Adafruit Learning System, with more added all the time! The FLORA is small (1.75" diameter, weighing 4.4 grams). The FLORA family also has the best stainless...

$14.95

IN STOCK

Adafruit GEMMA v2 - Miniature wearable electronic platform

PRODUCT ID: 1222

Deprecation Warning: The Gemma bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well....

Deprecation Warning: The Gemma bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Gemma so that people can maintain some older projects, we no longer recommend it. Please check out the Gemma M0. It has built-in USB, more capabilities, and is comparable in price! Love FLORA but want a bite-sized version? Look no further, GEMMA is a tiny wearable...

$9.95

28 IN STOCK

Gemma Starter Pack

PRODUCT ID: 1657

Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA...

Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA board, four sewable bright RGB pixels, a battery holder and batteries, 2-ply conductive thread, alligator clips to help you test out your circuit, and a USB cable for programming GEMMA. Note : As of June 20th, 2016 this pack no longer comes with CR2032 batteries to make shipping easier for customers. You...

$27.95

28 IN STOCK

FLORA Budget Pack

PRODUCT ID: 1405

Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to get you started with this fun wearable computer....

Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to get you started with this fun wearable computer. Included are enough parts to make your first wearable electronic project. There's a Flora motherboard, four ultra-bright chainable RGB pixels, a 3xAAA battery holder and batteries, a battery extension cable, our high quality stainless steel thread, alligator clips to help you test out your parts...

$34.95

66 IN STOCK

Lithium Ion Polymer Battery - 3.7v 1200mAh

PRODUCT ID: 258

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when...

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh. If you need a larger battery, we also have a 2500mAh+ model The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a...

$9.95

IN STOCK

Lithium Ion Polymer Battery - 3.7v 150mAh

PRODUCT ID: 1317

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when...

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 150mAh for a total of about 0.6 Wh. If you need a larger battery, we have a full range of bigger cells The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they...

$5.95

IN STOCK

JST-PH Battery Extension Cable - 500mm

PRODUCT ID: 1131

By popular demand, we now have a handy extension cord for all of our JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One...

By popular demand, we now have a handy extension cord for all of our JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH socket, and the other end has a matching plug. Between the two, 500mm of color coded wire. Handy for wearable projects where you may want the battery pack far from your Flora but useful in many other situations where you need a little more space. JST-PH Battery Extension Cable -...

$1.95

IN STOCK

2 x 2032 Coin Cell Battery Holder - 6V output with On/Off switch

PRODUCT ID: 783

This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds two 20mm coin cells (2032 are the most popular size) in...

This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds two 20mm coin cells (2032 are the most popular size) in series to generate 6V nominal. (If you want only 3V, we suggest sticking a crumpled piece of tin foil in one of the slots.) 20mm coin cells are popular as they are used in keychain lights, so they are easy to get, and fairly low cost. They tend to have about 220mAh capacity so this holder would...

$1.95

IN STOCK

Adafruit Micro Lipo - USB LiIon/LiPoly charger - v1

PRODUCT ID: 1304

Oh so adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold...

Oh so adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on....

$5.95

IN STOCK

Adafruit LED Sequins - Warm White - Pack of 5

PRODUCT ID: 1758

Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a...

Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a single color and they don't have digital control, but that makes them smaller easier to use for many projects. Simply connect 3 to 6VDC to the + pin and ground to the - pin, and the LED on the board will light up. You can make the LEDs fade and twinkle by using the PWM (a.k.a. analogWrite)...

$3.95

IN STOCK

3 x AAA Battery Holder with On/Off Switch and 2-Pin JST

PRODUCT ID: 727

This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim,...

This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch. That makes them ideal for use with 3.3V projects that have a 2-pin JST connector meant for one of our Li-Ion/Poly batteries. (Of course, you can't recharge them...

$1.95

66 IN STOCK

Sewable CR2032 Battery Holder

PRODUCT ID: 653

This battery holder is by far the easiest way to add a battery to a small wearable project. By coincidence, there are two small 1mm diameter holes in...

This battery holder is by far the easiest way to add a battery to a small wearable project. By coincidence, there are two small 1mm diameter holes in the metal connection tabs, just large enough for a #5 or smaller needle to pass through. One tab connects to common ground (negative) and the other tab is +3 Volts. This holder is meant to be used with Lithium CR2032 (20mm diameter, 3.2mm thick) sized coin batteries. These are almost always 3V at...

$1.95

IN STOCK

Flora RGB Smart NeoPixel version 2 - Pack of 4

PRODUCT ID: 1260

What's a wearable project without LEDs? Our favorite part of the Flora platform is these tiny smart pixels. Designed specifically for wearables,...

What's a wearable project without LEDs? Our favorite part of the Flora platform is these tiny smart pixels. Designed specifically for wearables, these updated Flora NeoPixels have ultra-cool technology: these ultra-bright LEDs have a constant-current driver cooked right into the LED package! The pixels are chainable - so you only need 1 pin/wire to control as many LEDs as you like. They're easy to sew, and the chainable design means no...

$7.95

IN STOCK

Stainless Thin Conductive Thread - 2 ply - 23 meter/76 ft

PRODUCT ID: 640

After months of searching, we finally have what we consider to be the ultimate conductive thread. It's thin, strong, smooth, and made completely...

After months of searching, we finally have what we consider to be the ultimate conductive thread. It's thin, strong, smooth, and made completely of 316L stainless steel. Once you start working with this thread you'll quickly agree its optimal for any wearables work! This thread is 2 ply, a little thicker than every day polyester or cotton thread but still thin enough to be sewn by hand in medium-eye needles or with a sewing machine that...

$6.95

IN STOCK

Small Alligator Clip Test Lead (set of 12)

PRODUCT ID: 1008

Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color...

Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place. Compared to our Large alligator clip set, these clips are smaller and 'pointier' 12 piece set, color coded...

$3.95

IN STOCK

Pressure-Sensitive Conductive Sheet (Velostat/Linqstat)

PRODUCT ID: 1361

This conductive material (also known as "Velostat" or "Linqstat") is a nice addition for your wearable/sensor hacking toolkit....

This conductive material (also known as "Velostat" or "Linqstat") is a nice addition for your wearable/sensor hacking toolkit. It's pressure-sensitive: squeezing it will reduce the resistance, so it's handy for making flexible sensors. And it's a lot less expensive than off-the-shelf pressure or bend sensors too! Each order comes with a 11"x11" (28cm x 28cm) 4mil (0.1mm) thick piece. We may fold the...

$4.95

IN STOCK

Stainless Medium Conductive Thread - 3 ply - 18 meter/60 ft

PRODUCT ID: 641

After months of searching, we finally have what we consider to be the ultimate conductive thread. It's thin, strong, smooth, and made completely...

After months of searching, we finally have what we consider to be the ultimate conductive thread. It's thin, strong, smooth, and made completely of 316L stainless steel. Once you start working with this thread you'll quickly agree its optimal for any wearables work! This thread is 3 ply, thicker than every day polyester or cotton thread but still thin enough to be sewn by hand in medium-eye needles. This may be sew-able by a sewing...

$9.95

IN STOCK

Adafruit LED Sequins - Royal Blue - Pack of 5

PRODUCT ID: 1757

Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a...

$3.95

IN STOCK

Tactile On/Off Switch with Leads

PRODUCT ID: 1092

Squeeze once to turn on, squeeze again to turn off! This clicky switch makes a great power switch or mode toggler. We like this switch because...

Squeeze once to turn on, squeeze again to turn off! This clicky switch makes a great power switch or mode toggler. We like this switch because it's easy to embed in a seam for easily powering up/off wearable and fabric projects. Can handle up to 14V and 2 Amps! This is a really satisfying switch. As of May 20th, the dimensions of this switch are: Length of wires: 190mm / 7.5"Dimensions of body: 16mm x 15mm x 6mm / 0.6" x 0.6"...

$3.95

IN STOCK

Adafruit LED Sequins - Ruby Red - Pack of 5

PRODUCT ID: 1755

Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a...

$3.95

IN STOCK

Short Wire Alligator Clip Test Lead (set of 12)

PRODUCT ID: 1592

Connect this to that without soldering using these handy mini alligator clip test leads. Approximately 4.5" overall cables with alligator clip...

Connect this to that without soldering using these handy mini alligator clip test leads. Approximately 4.5" overall cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place. Compared to our Large alligator clip set, these clips are smaller and 'pointier'. These...

$3.95

IN STOCK

Woven Conductive Fabric - 20cm square

PRODUCT ID: 1168

This woven conductive fabric is silver colored and made of Copper+Nickel-plated nylon. Use small pieces for soft switches, plush keypads, capacitive...

This woven conductive fabric is silver colored and made of Copper+Nickel-plated nylon. Use small pieces for soft switches, plush keypads, capacitive touch sensors, and other textile interfaces. This highly conductive fabric has a resistance of less than 1 ohm per foot in any direction across the textile. Great for use with FLORA. Sold as a 20cm x 20cm piece (minimum dimension) Iron on medium if necessary, steam ok. Dry cleaning recommended....

$4.95

IN STOCK

Flora Color Sensor with White Illumination LED - TCS34725

PRODUCT ID: 1356

Your electronics can now see in dazzling color with this lovely color light sensor. We found the best color sensor on the market, the TCS34725, which...

Your electronics can now see in dazzling color with this lovely color light sensor. We found the best color sensor on the market, the TCS34725, which has RGB and Clear light sensing elements. An IR blocking filter, integrated on-chip and localized to the color sensing photodiodes, minimizes the IR spectral component of the incoming light and allows color measurements to be made accurately. The filter means you'll get much truer color than...

$7.95

83 IN STOCK

Adafruit LED Sequins - Emerald Green - Pack of 5

PRODUCT ID: 1756

Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a...

$3.95

IN STOCK

Flora Wearable Bluefruit LE Module

PRODUCT ID: 2487

Would you like to add powerful and easy-to-use Bluetooth Low Energy to your wearable FLORA project? Heck yeah! With BLE now included in modern smart...

Would you like to add powerful and easy-to-use Bluetooth Low Energy to your wearable FLORA project? Heck yeah! With BLE now included in modern smart phones and tablets, its fun to add wireless connectivity. So what you really need is the new Adafruit Flora Bluefruit LE! The Flora Bluefruit LE makes it easy to add Bluetooth Low Energy connectivity to your Flora. Sew 4 traces (or solder 4 wires) and BooM! Bluetooth Low Energy! Get started fast...

$17.50

66 IN STOCK

Conductive Rubber Cord Stretch Sensor + extras!

PRODUCT ID: 519

Measuring stretch forces isn't easy - unless you have some conductive rubber cord! This cord is 2mm diameter, and 1 meter long, made of...

Measuring stretch forces isn't easy - unless you have some conductive rubber cord! This cord is 2mm diameter, and 1 meter long, made of carbon-black impregnated rubber. Usually this material is used for EMF gasketing, but its also very fun to play with. In a 'relaxed' state, the resistance is about 350 ohms per inch. As you pull on it, the resistance increases (the particles get further apart). As you stretch it out, the resistance...

$9.95

8 IN STOCK

20mm Coin Cell Breakout w/On-Off Switch (CR2032)

PRODUCT ID: 1871

Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on, an on/off switch and 0.1" pitch breakout...

Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on, an on/off switch and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar. There's two ground pins, one 'switched' power pin, and one pin that is always on. Comes with one fully assembled and tested breakout plus a small...

$3.50

IN STOCK

Stainless Thin Conductive Yarn / Thick Conductive Thread - 30 ft

PRODUCT ID: 603

This 316L stainless steel thread falls somewhere between a thick thread and a thin yarn. Most sewing machines wouldn't be happy with this thread...

This 316L stainless steel thread falls somewhere between a thick thread and a thin yarn. Most sewing machines wouldn't be happy with this thread since its thick, and it has the 'furry' soft feel of yarn which makes it poor for most e-textiles/wearables projects. However, the high conductivity and softness make it a great thread for making iPhone gloves! Sew a couple inches into the pad of your gloves to keep your hands toasty while...

$4.50

IN STOCK

USB cable - A/MiniB - 3ft

PRODUCT ID: 260

This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy v2, USB Lipo charger w/Mini B connector,...

This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy v2, USB Lipo charger w/Mini B connector, among other things. Approximately 3 feet / 1 meter long Color may vary!

$4.00

IN STOCK

FLORA Accelerometer/Compass Sensor - LSM303 - v1.0

PRODUCT ID: 1247

Add motion and direction sensing to your wearable FLORA project with this high precision 3-axis Accelerometer+Compass sensor. Inside are two sensors,...

Add motion and direction sensing to your wearable FLORA project with this high precision 3-axis Accelerometer+Compass sensor. Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect...

$14.95

OUT OF STOCK

3M Z-Axis Conductive Tape 9703 - 2"x6" (50mm x 150mm) Strip

PRODUCT ID: 1656

When Bunnie showed up at Adafruit with the prototype for his Chibitronics Circuit Stickers we were all like "How on earth does that work?"...

When Bunnie showed up at Adafruit with the prototype for his Chibitronics Circuit Stickers we were all like "How on earth does that work?" and he was all like "Z-Axis tape - Its amazing!" And we agreed, so we decided to get some in our Materials section since its so cool. Z-axis tape is made by 3M, and is used to bond two conductive surfaces together and allow a small (we'd say keep it under 100mA) current to flow through...

$4.95

IN STOCK

Needle set - 3/9 sizes - 20 needles

PRODUCT ID: 615

Mighty needles, sew like the wind! This needle set is the only one you'll need for any sort of hand sewing, especially using our conductive...

Mighty needles, sew like the wind! This needle set is the only one you'll need for any sort of hand sewing, especially using our conductive thread and wearable electronics parts. Each pack contains 20 gold-eye sharps, with eye sizes ranging from #3 (1.75" long) to #9 (1.35" long). The two #3's (the largest) are too large to pass through the sewable coin cell holder but otherwise are easy to use and thread. The four #9's...

$1.95

IN STOCK

Adafruit LED Sequins - Rose Pink - Pack of 5

PRODUCT ID: 1792

Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a...

$3.95

IN STOCK

Trinket-Powered NeoPixel Goggle Kit Pack

PRODUCT ID: 2221

As of October 12th, 2015 this product now ships with an Adafruit Trinket with a micro-USB plug. One of the most popular Trinket projects now has its...

As of October 12th, 2015 this product now ships with an Adafruit Trinket with a micro-USB plug. One of the most popular Trinket projects now has its own kit pack! Make your very own programmable NeoPixel goggles with 2 x 16 LED rings and an Adafruit Trinket. It even comes with a rechargeable LiPoly battery and charger. It's a great easy build and when you're done you'll have the coolest accessory. Follow along with our popular...

$39.95

11 IN STOCK

Pulse Sensor Amped

PRODUCT ID: 1093

Pulse Sensor Amped is a greatly improved version of the original Pulse Sensor, a plug-and-play heart-rate sensor for Arduino and Arduino compatibles....

Pulse Sensor Amped is a greatly improved version of the original Pulse Sensor, a plug-and-play heart-rate sensor for Arduino and Arduino compatibles. It can be used by students, artists, athletes, makers, and game & mobile developers who want to easily incorporate live heart-rate data into their projects. Pulse Sensor Amped adds amplification and noise cancellation circuitry to the hardware. It's noticeably faster and easier to get...

$25.00

IN STOCK

Conductive Hook & Loop Tape - 3" long

PRODUCT ID: 1324

Conductive hook & loop tape is just like the stuff you've seen on jackets, clothes, shoes, and bags, but is coated with silver to make it...

Conductive hook & loop tape is just like the stuff you've seen on jackets, clothes, shoes, and bags, but is coated with silver to make it fully conductive. Originally this was designed to the manufacture of static-safe clothing, but its great for wearable applications as well. For example an on-off switch or sensor. Each order ships with three inches of BOTH halves, its easily sewn or cut. Conductive Hook & Loop Tape - 3" long...

$7.50

IN STOCK

Sewable Snaps - 5mm Diameter - Card of 24

PRODUCT ID: 1126

The small 5mm size of these tin-plated brass snaps means they fit perfectly on Flora's pads! Snaps make a great connector for wearables-- solder...

The small 5mm size of these tin-plated brass snaps means they fit perfectly on Flora's pads! Snaps make a great connector for wearables-- solder one side to the board and sew the other to your project with conductive thread! This card comes with 24 complete snaps (socket and stud pairs). Some discoloration may occur during soldering. These snaps are washable, oxidation-resistant, and nonmagnetic.

$3.95

1 IN STOCK

Round Solar Panel Skill Badge - 5V / 40mA

PRODUCT ID: 700

This skill badge is self-fulfilling! Normally you would get the badge after the project is done, but in this case, the badge can be part of the...

This skill badge is self-fulfilling! Normally you would get the badge after the project is done, but in this case, the badge can be part of the project! The solar panel is epoxied into a round disc 55mm diameter (about 2.2 inches), its rugged and looks cool besides. We include a sticky foam pin back you can attach to the back of the panel to mount it onto a backpack, jacket or sash. Of course, it also is a perfectly functional solar panel. There...

$2.95

IN STOCK

Flex PCB Material - Pyralux - 6" by 6" Square - AC 352500EY

PRODUCT ID: 1894

Finally, the conductive material you've known you wanted but never knew you could have, its a sheet of flex PCB material! This is the stuff used...

Finally, the conductive material you've known you wanted but never knew you could have, its a sheet of flex PCB material! This is the stuff used to make flexible circuits, but raw and unetched. You can treat it just like 1 oz copper clad, etch it with ferric chloride (or other PCB etching systems) or cut with scissors. It may even be possible to laser or CNC engrave (we haven't tried it ourselves but we'd love to hear about it if you...

$8.95

IN STOCK

Adafruit Gemma Sequin Starter Pack

PRODUCT ID: 1850

Make your wearables glow with the GEMMA sequin pack ! This GEMMA parts pack makes it easy to add light to your wearables. It comes with thread,...

Make your wearables glow with the GEMMA sequin pack ! This GEMMA parts pack makes it easy to add light to your wearables. It comes with thread, needles, a holder for 2 x CR2032 coin cell batteries, a GEMMA sewable microcontroller, and warm white Adafruit LED Sequins. This pack is perfect for adding a little sparkle to any garment or accessory, and is a great way to get started sewing electronics. Note : As of June 20th, 2016 this pack no longer...

$17.95

28 IN STOCK

Magnetic Pin Back

PRODUCT ID: 1170

These magnetic pin backs have two pieces: a metal bar with adhesive strip and a plastic piece with two strong rare-earth magnets. Affix the metal bar...

These magnetic pin backs have two pieces: a metal bar with adhesive strip and a plastic piece with two strong rare-earth magnets. Affix the metal bar to your FLORA projects-- it's just the right size! Then attach your FLORA project to any garment without poking holes in your clothes. The magnets are strong enough to hold up even a hefty circuit! We recommend against soldering/brazing/welding to any part of the magnetic pin back, as the...

$1.95

IN STOCK

20mm Coin Cell Breakout Board (CR2032)

PRODUCT ID: 1870

Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on and 0.1" pitch breakout pins for easy...

Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar. Comes with one fully assembled and tested coin cell battery holder and a small stick of 0.1" header so you can solder it on and plug into a breadboard. Coin cell battery is...

$2.50

IN STOCK

Getting Started with Adafruit FLORA Book Pack

PRODUCT ID: 2404

Pickup a copy of Getting Started with Adafruit FLORA and then hit the ground running with everything that you need to become an Adafruit...

Pickup a copy of Getting Started with Adafruit FLORA and then hit the ground running with everything that you need to become an Adafruit FLORA supreme being! This pack is perfect for somebody interested in the wide world of wearable electronics and Adafruit's tiny FLORA board. Pack includes: 1x Getting Started with Adafruit FLORA book 1x FLORA - Wearable electronic platform: Arduino-compatible As of May 12th, 2015 the FLORA...

$94.95

OUT OF STOCK

Flora Wearable Ultimate GPS Module

PRODUCT ID: 1059

This module is the best way to add a GPS to your wearable project. It's part of the Adafruit Flora series of wearable electronics, designed...

This module is the best way to add a GPS to your wearable project. It's part of the Adafruit Flora series of wearable electronics, designed specifically for use with the Flora motherboard. Installed on the PCB is the latest of our Ultimate GPS modules, a small, super-thin, low power GPS module with built in data-logging capability! This module's easy to use, but extremely powerful: -165 dBm sensitivity, 10 Hz updates, 66 channelsDesigned...

$39.95

IN STOCK

FLORA Sensor Pack

PRODUCT ID: 1458

Sense the world around you! The FLORA Sensor Pack includes many types of sensors for your wearable enjoyment. Sense motion, direction, color, light...

Sense the world around you! The FLORA Sensor Pack includes many types of sensors for your wearable enjoyment. Sense motion, direction, color, light levels, touch, and connections with FLORA sensor breakouts and conductive materials, and a few NeoPixels for experimenting with displaying your sensor information. Take your project portable with the included battery pack and stitch it into a final design with conductive thread. $100 worth of goodies...

$64.95

OUT OF STOCK

Flora UV Index Sensor - Si1145 Light Sensor

PRODUCT ID: 1981

Your wearable can now keep you from getting sunburnt, with the Flora digital UV index sensor. We took our popular SI1145 UV index sensor and cut out...

Your wearable can now keep you from getting sunburnt, with the Flora digital UV index sensor. We took our popular SI1145 UV index sensor and cut out everything you don't need for using with a Flora. It's small, round, and connects to the I2C bus pads. Flora can even use our library code to get calibrated light level and UV index data from the sensor. Please note: this sensor can be used by Flora but is too complex for Gemma! To use: connect the...

$8.95

IN STOCK

Flora Sewable 3-Pin JST Wiring Adapter

PRODUCT ID: 2566

This product's about as simple as a cup of lemonade on a hot summer day. And, like lemonade, it's just three components! This...

This product's about as simple as a cup of lemonade on a hot summer day. And, like lemonade, it's just three components! This board is a sewable adapter with a 3-pin JST wiring adapter. It's a perfect way to add a simple link between things like our Flora NeoPixels and more complicated products like our NeoPixel Rings. There are three holes on the board that are perfect for conductive thread (or soldering if...

$1.95

IN STOCK

Costume Goggles

PRODUCT ID: 1577

We've got some awesome LED goggle tutorials, and now you want to make your own, right? So pick up a pair of NeoPixel rings and these costuming...

We've got some awesome LED goggle tutorials, and now you want to make your own, right? So pick up a pair of NeoPixel rings and these costuming goggles and get to it! These goggles look a bit like aviator/welding goggle designs but are not for any sort of eye-protection! They are costume goggles only! You can wear them on top of your head or on your eyes but do not use for welding or flying or motorcycling, etc. The goggles are fully plastic...

$9.95

22 IN STOCK

Knit Jersey Conductive Fabric - 20cm square

PRODUCT ID: 1364

This knit jersey conductive fabric is 63% cotton, 35% silver yarn and 2% spandex. Use small pieces for soft switches, plush keypads, capacitive touch...

This knit jersey conductive fabric is 63% cotton, 35% silver yarn and 2% spandex. Use small pieces for soft switches, plush keypads, capacitive touch sensors, and other textile interfaces. It's very soft and matte, perfect for ironing onto wearables with double sided interfacing. This conductive fabric has different resistance in each direction: 46 ohms per foot across the rows (stretchier direction) and 460 ohms per foot across the columns...

$14.95

IN STOCK

Adafruit Beginner LED Sewing Kit

PRODUCT ID: 1285

Add LED accents to textile projects with Adafruit's LED Sewing Kit! Stitch a glowing circuit with conductive thread-- this kit comes with...

Add LED accents to textile projects with Adafruit's LED Sewing Kit! Stitch a glowing circuit with conductive thread-- this kit comes with everything you need to get started: 1 bobbin of 2-ply conductive thread2 x sewable CR2032 battery holders4 x candle flicker LEDs - they twinkle automatically, no need for a microcontroller or external circuit!4 x 5mm snaps to use as as sewable switchesNeedle set Note: As of September 30th, 2015, this...

$13.95

23 IN STOCK

Soft Potentiometer Kit from Plug&Wear

PRODUCT ID: 2273

This soft potentiometer is an interesting way to add an adjustable resistor / slide potentiometer to your wearable. You can use it to adjust the...

This soft potentiometer is an interesting way to add an adjustable resistor / slide potentiometer to your wearable. You can use it to adjust the brightness of an LED, or as a sensor input to your Flora or Gemma. When the ring slides up and down the ribbon, the resistance from the end of the ribbon to ring will vary from ~100 ohms to about 8Kohm. To use as a voltage-output potentiometer, connect one end to ground and the other end to 3.3V or so,...

$6.95

OUT OF STOCK

Knit Conductive Fabric - Silver 20cm square

PRODUCT ID: 1167

This knit conductive fabric is plated with real Silver and super luxe! Use small pieces on the tips of gloves or in any soft circuit situation where...

This knit conductive fabric is plated with real Silver and super luxe! Use small pieces on the tips of gloves or in any soft circuit situation where you need a bit of stretch. This highly conductive fabric has a resistance of less than 1 ohm per foot in any direction across the textile. It can be used to make soft keypads and capacitive touch sensors, as well as soft "squeeze" switches. Great for use with FLORA. Sold as a 20cm x 20cm...

$9.95

IN STOCK

Adafruit Gemma Sensor Starter Pack

PRODUCT ID: 1849

Go interactive with sensors and Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic sensing project (or...

Go interactive with sensors and Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic sensing project (or two). There's a GEMMA board, four sewable bright RGB pixels, a motion sensor, a switch, a light sensor, a piezo, a rechargeable battery and charger, 2-ply conductive thread, alligator clips to help you test out your circuit, and a USB cable for programming GEMMA. Gemma Sensor Pack contents: Adafruit...

$44.95

28 IN STOCK

Litex White LEDs on Black Fabric Ribbon Pack - 1.5 meter 20 LEDs

PRODUCT ID: 1397

This soft fabric ribbon has tiny surface mount LEDs bonded onto two thin conductive threads that go along the length. A tiny battery pack controller...

This soft fabric ribbon has tiny surface mount LEDs bonded onto two thin conductive threads that go along the length. A tiny battery pack controller snaps onto the end. The result is an ultra-flexible and elegant-looking way to add LEDs to a wearable project. This ribbon is approximately 1.5 meters long, and has 20 white LEDs spaced equally along the ribbon. You can cut the ribbon easily but you cannot solder to it so once it's cut, it...

$12.95

35 IN STOCK

GEMMA Talking Toy Guts Sound Pack

PRODUCT ID: 1759

Mod your stuffed toy to chirp, meow, or woof! This GEMMA parts pack makes it easy to add simple sounds to any plush toy, and especially the...

Mod your stuffed toy to chirp, meow, or woof! This GEMMA parts pack makes it easy to add simple sounds to any plush toy, and especially the Sew-Your-Own Owl Kit (not included!) A tilt ball switch is used to trigger GEMMA to play a sound of your choosing (or write your own) through a small speaker, amplified by a transistor. This product includes: 1x Adafruit Gemma V21x 3.7v 150mAh LiPoly Battery 1x Tilt Ball Switch1x Adafruit Micro...

$19.95

4 IN STOCK

Conductive Fiber - Stainless Steel 20um - 10 grams

PRODUCT ID: 1088

This conductive fiber is super interesting! It's great for felting and could also be spun into yarn if that's your thing. We tested many...

This conductive fiber is super interesting! It's great for felting and could also be spun into yarn if that's your thing. We tested many different fiber thicknesses for needle felting and found that this one (20um fiber thickness) is the most pleasurable to work with. Use about 0.2g of the stuff to make a felt touch button suitable for use with the MaKey MaKey or capacitive touch sensing circuit. Make felt controllers or felt buttons...

$2.95

IN STOCK

Getting Started with Adafruit FLORA

PRODUCT ID: 1839

Making Wearables with an Arduino-Compatible Electronics Platform This book introduces readers to building wearable electronics projects using...

Making Wearables with an Arduino-Compatible Electronics Platform This book introduces readers to building wearable electronics projects using Adafruit's tiny FLORA board: at 4.4 grams, and only 1.75 inches in diameter, and featuring Arduino compatibility, it's the most beginner-friendly way to create wearable projects. This book shows you how to plan your wearable circuits, sew with electronics, and write programs that run on the FLORA...

$16.99

53 IN STOCK

FLORA GPS Starter Pack

PRODUCT ID: 1090

Get started with the fabulous Adafruit Flora platform with this lovely starter kit. Included are plenty of parts to make a few different fun...

Get started with the fabulous Adafruit Flora platform with this lovely starter kit. Included are plenty of parts to make a few different fun projects! There's a Flora motherboard, a GPS module that can also perform location datalogging, eight ultra-bright chainable RGB pixels, a battery holder and batteries, two types of our high quality stainless steel thread, alligator clips to help you test out your parts, a USB cable for reprogramming the...

$89.95

53 IN STOCK

Stainless Steel Conductive Ribbon - 5mm wide 1 meter long

PRODUCT ID: 1244

This woven conductive ribbon is great for powering lots of LEDs in a wearable project. It's thin, strong, smooth, and made completely of 316L...

This woven conductive ribbon is great for powering lots of LEDs in a wearable project. It's thin, strong, smooth, and made completely of 316L stainless steel. It plays nice with our stainless conductive thread and is very flexible, just like textile ribbon. The easiest way to attach this ribbon is to either slip it through a casing, or better yet, zig-zag stitch over it to tack it down. Because it is strong and flexible, its ideal for any...

$24.95

45 IN STOCK

Litex Spare Battery Case

PRODUCT ID: 1355

This is a little battery pack for our Litex LED ribbons. No LEDs are included, but the battery pack is very nice and you can cut the LED ribbon in...

This is a little battery pack for our Litex LED ribbons. No LEDs are included, but the battery pack is very nice and you can cut the LED ribbon in half and then use the extra battery pack to power the excess. Comes with two CR1220 batteries, we also carry extras if you need them! Litex Spare Battery Case (4:55) Note: Battery case may come grey or black

$4.95

14 IN STOCK

Stainless Steel Conductive Ribbon - 17mm wide 1 meter long

PRODUCT ID: 1243

This woven conductive ribbon is great for powering lots of LEDs in a wearable project. It's thin, strong, smooth, and made completely of 316L...

$29.95

70 IN STOCK

Litex White LEDs on Black Fabric Ribbon Pack

PRODUCT ID: 1353

This soft fabric ribbon has tiny surface mount LEDs bonded onto two thin conductive threads that go along the length. A tiny battery pack controller...

This soft fabric ribbon has tiny surface mount LEDs bonded onto two thin conductive threads that go along the length. A tiny battery pack controller snaps onto the end. The result is an ultra-flexible and elegant-looking way to add LEDs to a wearable project. This ribbon is approximately 21"/53cm long, and has 10 white LEDs spaced equally along the ribbon. You can cut the ribbon easily but you cannot solder to it so once it's cut, it...

$9.95

3 IN STOCK

The LED Artist A12 - RGB LED Wearable

PRODUCT ID: 1574

Akimitsu "The LED Artist" Sadoi is a local New York artist who designs and makes beautiful LED art. We're excited to carry his lovely...

Akimitsu "The LED Artist" Sadoi is a local New York artist who designs and makes beautiful LED art. We're excited to carry his lovely new wearable designs. The A12 is a wearable ring, a little less than 2" diameter, that has 12 RGB LEDs that animate and sparkle. Comes fully assembled and with a non-rechargeable CR2450 coin cell. 12 full-color LEDs produce beautiful colors. Comes with a non-rechargeable battery (CR2450, easily...

$44.95

15 IN STOCK

Circuit Playground Classic

PRODUCT ID: 3000

Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here - and it's the best...

Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here - and it's the best way to practice programming on real hardware with no soldering or sewing required! This is the Classic version of Circuit Playground , which comes with an ATmega32u4. It's designed to be used with Arduino IDE and code.org CS Discoveries only. It even comes with Firmata already programmed in, so...

$19.95

IN STOCK

Adafruit GEMMA M0 - Miniature wearable electronic platform

PRODUCT ID: 3501

The Adafruit Gemma M0 is a super small microcontroller board, with just enough built-in to create many simple projects. It may look small and cute:...

The Adafruit Gemma M0 is a super small microcontroller board, with just enough built-in to create many simple projects. It may look small and cute: round, about the size of a quarter, with friendly alligator-clip sew pads. But do not be fooled! The Gemma M0 is incredibly powerful! We've taken the same form factor we used for the original ATtiny85-based Gemma and gave it an upgrade. The Gemma M0 has swapped out the lightweight...

$9.95

87 IN STOCK

Bolt-On Kit for Circuit Playground, micro:bit, Flora or Gemma

PRODUCT ID: 4103

You have a Circuit Playground Express, and want to connect some wires to it for adding LEDs or sensors or speakers? You can use our nice alligator...

You have a Circuit Playground Express, and want to connect some wires to it for adding LEDs or sensors or speakers? You can use our nice alligator clips, but they are a little bulky. If you aren't quite ready to solder to your Playground, try this simple but effective bolt kit. In this kit comes: 6 x M3 5mm machine steel screws6 x M3 zinc-plated steel hex nuts Using them is simple! Put the screw through the large alligator pads on your...

$1.50

70 IN STOCK

Adafruit LED Sequins - Multicolor Pack of 5

PRODUCT ID: 3377

Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a...

$3.95

IN STOCK

Small Alligator Clip to Male Jumper Wire Bundle - 12 Pieces

PRODUCT ID: 3255

For bread-boarding with unusual non-header-friendly surfaces, these cables will be your best friends! No longer will you have long strands of...

For bread-boarding with unusual non-header-friendly surfaces, these cables will be your best friends! No longer will you have long strands of alligator clips that are grabbing little wires. These compact jumper cables have a premium male header on one end, and a grippy mini alligator clip on the other. Grab onto your Flora, Circuit Playground, micro:bit, Gemma, or even a banana, and plug it into a breadboard for prototyping joy! You get 12...

$7.95

IN STOCK

Small Alligator Clip Test Lead (set of 6)

PRODUCT ID: 4100

Connect this to that without soldering using these small alligator clip test leads. 18" long cables with color-coded alligator clips on...

Connect this to that without soldering using these small alligator clip test leads. 18" long cables with color-coded alligator clips on both ends. You get 6 pieces in 6 unique colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place. Compared to our large alligator clip set, these clips are smaller and 'pointier' 6 piece...

$2.95

10 IN STOCK

Copper Foil Tape with Conductive Adhesive - 6mm x 5 meters long

PRODUCT ID: 3483

Copper tape can be an interesting addition to your toolbox. The tape itself is made of thin pure copper so it's extremely flexible and can take...

Copper tape can be an interesting addition to your toolbox. The tape itself is made of thin pure copper so it's extremely flexible and can take on nearly any shape. You can solder to it, and the tape itself can carry current just like a wire. On the back is an electrically conductive adhesive. The adhesive can't carry significant current, but it is very handy for sensing applications where you don't want to solder the copper tape....

$4.95

11 IN STOCK

Circuit Playground Express Advanced Pack

PRODUCT ID: 2769

Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit...

Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and made it even better! Not only did we pack even more sensors in, we also made it even easier to program. You can now start your journey with Microsoft MakeCode block-based or Javascript programming. If you're in a classroom following Code.org's CS...

$99.95

72 IN STOCK

Small Alligator Clip to Male Jumper Wire Bundle - 6 Pieces

PRODUCT ID: 3448

When working with unusual non-header-friendly surfaces, these handy cables will be your best friends! No longer will you have long, cumbersome...

When working with unusual non-header-friendly surfaces, these handy cables will be your best friends! No longer will you have long, cumbersome strands of alligator clips. These compact jumper cables have a premium male header on one end and a grippy mini alligator clip on the other. Grab onto your Flora, Circuit Playground, micro:bit, Gemma, or even a banana, and plug it into a breadboard for prototyping joy and ease! 6 piece set,...

$3.95

IN STOCK

Conductive Nylon Fabric Tape - 5mm Wide x 10 meters long

PRODUCT ID: 3961

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft! This ...

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft! This Conductive Nylon tape goes great with our other interesting materials, such as copper tape, ITO glass or plastic, conductive inks, etc. We found that the metallic nylon fabric has some great improvements over plain copper tape. First of all it doesn't crack when bent or twisted!...

$2.95

IN STOCK

Large Liquid Crystal Light Valve - Controllable Shutter Glass

PRODUCT ID: 3330

What do you get when you power a layer of liquid crystal material sandwiched between two sheets of glass? A Liquid Crystal Light Valve (a.k.a a...

What do you get when you power a layer of liquid crystal material sandwiched between two sheets of glass? A Liquid Crystal Light Valve (a.k.a a LCD Controllable Black-out Panel)! They're often used for electric welding helmets because they can protect the welder's eyes from the bright sparks. Or – if you aren't a welder – they can be used to provide a "reveal" effect for your...

$7.50

IN STOCK

Small Alligator Clip Test Lead (Set of 18)

PRODUCT ID: 3447

Connect this to that without soldering using these mini alligator clip test leads. 15" cables with alligator clip on each end in six colors....

Connect this to that without soldering using these mini alligator clip test leads. 15" cables with alligator clip on each end in six colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter, so we don't have to hold the probes in place, or with wearable projects, or for quick prototyping with big-pad circuit boards like microbit & Circuit Playground. Compared to our large alligator...

$5.95

IN STOCK

Conductive Nylon Fabric Tape - 8mm Wide x 10 meters long

PRODUCT ID: 3960

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft! This Conductive Nylon tape goes...

$3.95

IN STOCK

RFID/NFC Nail Stickers - 5 Pack with White LEDs

PRODUCT ID: 3781

You're at New York's hottest cyberpunk club is Near Field Commune(ication), and it's got everything , Adabot & the Circuit...

You're at New York's hottest cyberpunk club is Near Field Commune(ication), and it's got everything , Adabot & the Circuit Playground, Collin's wondrous, mind-blowing, heart-stirring Pulse Room, and more! And you are dressed to the cyber-nine's, with wearable LEDs, EL tape, and a full manicure set of glittering RFID/NFC Nail Stickers ! These tiny flexible PCBs have a coil, transistors and a little LED on...

$8.50

IN STOCK

Pimoroni MINI.MU Glove Kit - without micro:bit

PRODUCT ID: 4141

The MINI.MU is MI.MU's make-it-yourself musical glove for young engineers. It's a collaboration between Grammy Award-winning...

The MINI.MU is MI.MU's make-it-yourself musical glove for young engineers. It's a collaboration between Grammy Award-winning musician-goddess Imogen Heap, creative technologist and children’s author Helen Leigh, Pimoroni, and the MI.MU glove team. This kit uses the micro:bit to create a friendly, simple and fun crafty code experience. These gloves are a simplified, kid-friendly version of Imogen's more...

$33.50

38 IN STOCK

13.56MHz RFID/NFC Bracelet - NTAG203 Chip

PRODUCT ID: 4043

This is a blank 13.56MHz RFID/NFC Bracelet with an NTAG203 chip - often used for train/bus passes, information sharing,...

This is a blank 13.56MHz RFID/NFC Bracelet with an NTAG203 chip - often used for train/bus passes, information sharing, contactless payment, but also found in other systems where a proximity card is desired. The bracelet contains a small RFID chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. These can be read by almost any 13.56MHz RFID/NFC reader, but make sure...

$3.95

7 IN STOCK

Nth-Light Narrow LED Flexible Strip Light

PRODUCT ID: 3683

Here at Adafruit we never get tired of new and exotic glowing things. Like moths to the flame, we were intrigued by this new LED technology from Nth...

Here at Adafruit we never get tired of new and exotic glowing things. Like moths to the flame, we were intrigued by this new LED technology from Nth Light. Instead of having individual LEDs, Nth prints micro LED diodes onto a flexible plastic substrate for a unique look. The Nth-Light Narrow LED Flexible Strip Light is printed in three basic processes, starting with standard LED wafers. These wafers are then cut into micro LEDs the...

$18.50

IN STOCK

Day of the Geek Soldering Badge

PRODUCT ID: 3590

Are you a proud geek who also loves the Day of the Dead? Qu é bueno! Well, this Day of the Geek LED Skull Badge will be up your alley!...

Are you a proud geek who also loves the Day of the Dead? Qu é bueno! Well, this Day of the Geek LED Skull Badge will be up your alley! This is a DIY soldering kit you'll need to assemble it yourself, but luckily it's very easy and very fast, so this is a good kit for beginners. You even get a wide range of LEDs for the eyes so you can make your skull just the way you like it. You'll need basic soldering tools, such as an...

$8.95

IN STOCK

Silver Pin Back with Foam Adhesive

PRODUCT ID: 2838

This little Silver-color Pin with Foam Adhesive is the perfect way to attach any PCB or small component to cloth material. The adhesive forms a...

This little Silver-color Pin with Foam Adhesive is the perfect way to attach any PCB or small component to cloth material. The adhesive forms a solid but not permanent bond for a strong reliable hold. The pin also has a handy little locking mechanism to keep the pin from unlatching from friction. If you are working with wearables be sure to keep a handful of these around - they pair especially well with the Flora, Gemma, and Circuit...

$0.45

IN STOCK

Advanced Cosplay Lights - Animated LEDs - by Svetlana Quindt @KamuiCosplay

PRODUCT ID: 3656

Svetlana Quindt (best known as @KamuiCosplay) is an accomplished cosplayer and author from Germany who uses her powers for the greater...

Svetlana Quindt (best known as @KamuiCosplay) is an accomplished cosplayer and author from Germany who uses her powers for the greater good, endowing the cosplay community with LED knowledge! Her guides are chock full of infectious enthusiasm and adorable Corgis, making it very easy for non-STEM fans to join the fun. In this volume you’ll learn everything about working with animated Digital RGB LED strips (a.k.a. NeoPixels)...

$19.95

14 IN STOCK

Rainbow Crafting Yarn

PRODUCT ID: 4015

We've been stocking some options in conductive copper foil and nylon tape recently, but sometimes a project needs material that's more analog...

We've been stocking some options in conductive copper foil and nylon tape recently, but sometimes a project needs material that's more analog . Enter this nice chunky spool of Rainbow Crafting Yarn ! You can use this material to decorate your robot, or of course as a colorful twin in guides such as the Crickit Mini Golf Course or the Carnival Swing Ride Yarn is made of cotton, you could use it for knitting too!

$2.95

IN STOCK

The Book of Cosplay Lights - Getting Started with LEDs - by Svetlana Quindt @KamuiCosplay

PRODUCT ID: 3655

Svetlana Quindt (best known as @KamuiCosplay) is an accomplished cosplayer and author from Germany who uses her powers for the greater...

Svetlana Quindt (best known as @KamuiCosplay) is an accomplished cosplayer and author from Germany who uses her powers for the greater good, endowing the cosplay community with LED knowledge! Her guides are chock full of infectious enthusiasm and adorable Corgis, making it very easy for anyone to shine. She puts it best: "Note that this book is written for cosplayers. Or better, it's written for myself five years ago when I...

$19.95

1 IN STOCK

How To Be A Digital Revolutionary – E-Book with USB Bracelet - by Violet Blue

PRODUCT ID: 3532

A wristband that teaches you how to use technology for activism! Our black RESIST bracelet has a hidden USB storage drive (64MB) and comes loaded...

A wristband that teaches you how to use technology for activism! Our black RESIST bracelet has a hidden USB storage drive (64MB) and comes loaded with a copy of the ultimate guide to modern tech-resistance, How to Be A Digital Revolutionary . Use the wristband to store and trade files; the book suggests what to load it with, like emergency contacts, your lawyer's phone number, ACLU "know your rights" guides, maps of a march or...

$9.95

IN STOCK

Flexible Silicone Neon-Like LED Strip in Various Colors - 1 Meter

PRODUCT ID: 3902

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these fresh Flexible Silicone...

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these fresh Flexible Silicone Neon-Like LED Strips ! They look a lot like neon, but without the need for expensive transformers, glass tubing or inert gasses. Super flexible and bendy, they feature a single-color non-addressable LED strip with a solid chunk of translucent silicone rubber as a diffuser. They look incredible, and...

Flora Lux Sensor - TSL2561 Light Sensor - v1.0

PRODUCT ID: 1246

Add light-reactive sensing to your wearable Flora project with this high precision Lux sensor. The TSL2561 luminosity sensor is an advanced digital...

Add light-reactive sensing to your wearable Flora project with this high precision Lux sensor. The TSL2561 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Compared to low cost CdS cells, this sensor is more precise, allowing for exact lux calculations and can be configured for different gain/timing ranges to detect light ranges from up to 0.1 - 40,000+ Lux on the fly. The best part of...

$7.95

OUT OF STOCK

Punk LED Collar Kit - Red LEDs

PRODUCT ID: 1454

Make your own studded choker with an LED twist! This kit of parts comes with all the materials you'll need for a punk style LED collar. Ten juicy...

Make your own studded choker with an LED twist! This kit of parts comes with all the materials you'll need for a punk style LED collar. Ten juicy diffused red LEDs adorn a high-quality black leather collar that fits necks 12-15 inches (30 to 38 centimeters). Attach the included battery holder and potentiometer, used to adjust the brightness of the LEDs. The simple circuit is powered by a single CR2032 battery (we provide an extra for maximum...

$29.95

7 IN STOCK

Cosplay World by Brian Ashcraft and Luke Plunkett

PRODUCT ID: 2224

Cosplay World is filled with striking images of costume play from around the world. This definitive look at the global phenomenon...

Cosplay World is filled with striking images of costume play from around the world. This definitive look at the global phenomenon known as “cosplay” examines its evolution from the fringes of society to the spotlight of modern culture. For over 100 years, men and women around the world have been dressing up as their favorite characters from movies, games, comics, TV, and books. Beginning as a curiosity and hobby for...

$29.95

4 IN STOCK

Litex White LEDs on White Fabric Ribbon Pack - 21" 10 LEDs

PRODUCT ID: 1354

This soft fabric ribbon has tiny surface mount LEDs bonded onto two thin conductive threads that go along the length. A tiny battery pack controller...

This soft fabric ribbon has tiny surface mount LEDs bonded onto two thin conductive threads that go along the length. A tiny battery pack controller snaps onto the end. The result is an ultra-flexible and elegant-looking way to add LEDs to a wearable project. This ribbon is approximately 21"/53cm long, and has 10 white LEDs spaced equally along the ribbon. You can cut the ribbon easily but you cannot solder to it so once it's cut, it...

$9.95

4 IN STOCK

Arduino GEMMA - Miniature wearable electronic platform

PRODUCT ID: 2470

What do you get when you combine an Adafruit classic with geniuses at Arduino? The Arduino GEMMA! It's a tiny wearable platform board...

What do you get when you combine an Adafruit classic with geniuses at Arduino? The Arduino GEMMA! It's a tiny wearable platform board with a lot of might in a 1" diameter package. Powered by a Attiny85 and programmable with an Arduino IDE over USB, you'll be able to realize any wearable project. This is a collaboration with Arduino.cc and Adafruit. This product is for US Sales only! Use Arduino IDE 1.6.4 or higher...

DISCONTINUED

FLORA 9-DOF Accelerometer/Gyroscope/Magnetometer - LSM9DS0 - v1.0

PRODUCT ID: 2020

Add motion, direction and orientation sensing to your wearable FLORA project with this high precision 9-DOF sensors. Inside are three...

Add motion, direction and orientation sensing to your wearable FLORA project with this high precision 9-DOF sensors. Inside are three sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The other is a 3-axis magnetometer that can sense where the strongest magnetic force is coming from, generally used...

DISCONTINUED

Conductive thread ribbon cable - Black - 1 yard

PRODUCT ID: 1424

This lightweight, flexible fabric ribbon cable contains four channels of conductive thread, perfect for wiring up wearables where flexibility is key....

This lightweight, flexible fabric ribbon cable contains four channels of conductive thread, perfect for wiring up wearables where flexibility is key. Use it to connect your conductive fabric gamepad to your microcontroller or computer! Features: Low resistance: ~16 Ω / ft. [304.80 mm]4 Conductor connectionsPower and data applicationsLight-weightSewableWashable and dryableStitchable over apparel construction seamsFoldable onto itself...

DISCONTINUED

Conductive thread ribbon cable - White - 1 yard

PRODUCT ID: 1139

This lightweight, flexible fabric ribbon cable contains four channels of conductive thread, perfect for wiring up wearables where flexibility is key....

DISCONTINUED

myDazzu - Programmable Wearable Electronic Wristband

PRODUCT ID: 1594

Design your own interactive light-up creation! Make a photo album that shines when you flip through it, a photo frame that lights up in the dark, a...

Design your own interactive light-up creation! Make a photo album that shines when you flip through it, a photo frame that lights up in the dark, a scrapbooking page that twinkles when you talk (with added sound/tilt/proximity sensors), and so much more. The Dazzu is an easy but inspiring introduction to wearable electronics. The Dazzu board is a flexible, programmable board, with 3 LEDs that can be slipped into pretty much any project. It has...

DISCONTINUED

Litex White LEDs on White Fabric Ribbon Pack - 1.5 meter 30 LEDs

PRODUCT ID: 1398

This soft fabric ribbon has tiny surface mount LEDs bonded onto two thin conductive threads that go along the length. A tiny battery pack controller...

This soft fabric ribbon has tiny surface mount LEDs bonded onto two thin conductive threads that go along the length. A tiny battery pack controller snaps onto the end. The result is an ultra-flexible and elegant-looking way to add LEDs to a wearable project. This ribbon is approximately 1.5 meters long, and has 30 white LEDs spaced equally along the ribbon. You can cut the ribbon easily but you cannot solder to it so once it's cut, it...

DISCONTINUED

Make: Wearable Electronics by Kate Hartman

PRODUCT ID: 2170

Combine fashion and high tech in your own workshop! What if your clothing could change color to complement your skin tone, respond to your racing...

Combine fashion and high tech in your own workshop! What if your clothing could change color to complement your skin tone, respond to your racing heartbeat, or connect you with a loved one from afar? Welcome to the world of shoes that can dynamically shift your height, jackets that display when the next bus is coming, and neckties that can nudge your business partner from across the room. Whether it be for fashion, function, or human...

DISCONTINUED

The LED Artist R48 - White LED Wearable

PRODUCT ID: 1575

Akimitsu "The LED Artist" Sadoi is a local New York artist who designs and makes beautiful LED art. We're excited to carry his lovely...

Akimitsu "The LED Artist" Sadoi is a local New York artist who designs and makes beautiful LED art. We're excited to carry his lovely new wearable designs. The R48 is a wearable LED ring, a little less than 2" diameter, that has 48 white SMD LEDs that animate and sparkle. Comes fully assembled and with a non-rechargeable CR2450 coin cell. Comes with all white LEDsEach R48 is fully assembled, and comes with a non-rechargeable...

DISCONTINUED

1,000 Incredible Costume & Cosplay Ideas

PRODUCT ID: 2208

1,000 Incredible Costume and Cosplay Ideas provides a broad and detailed glimpse into the ingenious artistry and attention to detail behind some...

1,000 Incredible Costume and Cosplay Ideas provides a broad and detailed glimpse into the ingenious artistry and attention to detail behind some of the most fabulous costumes you can find. Featuring costumes from popular convention-goers to professional craftsman, this stunning, photo-filled book by Joey Marsocci and Allison DeBlasio of Dr. Grymm Laboratories walks you through scads of your favorite characters as imagined and created by...

DISCONTINUED

Digital programmable LED belt kit

PRODUCT ID: 332

By popular demand, we now have a project tutorial for how to make your own programmable, ultra-blinky LED belt. Perfect for parties, raves, parades,...

By popular demand, we now have a project tutorial for how to make your own programmable, ultra-blinky LED belt. Perfect for parties, raves, parades, weddings, funerals, and bar mitzvahs. Wear it with pride, wear it with blinky! Follow our soldering tutorial to build your own heirloom LED belt, and hand it down to your grandkids. We designed this project to demonstrate how to use the digital LED strip, how to use our Atmega32u4 breakout board...

DISCONTINUED

Flashlight for Glass - Voice-Controlled Flashlight

PRODUCT ID: 1848

Face the future with handy illumination. We're proud to carry the first hardware accessory for the Google Glass! Why stick with plain old...

Face the future with handy illumination. We're proud to carry the first hardware accessory for the Google Glass! Why stick with plain old face-wearable technology when you could accessorize? Flashlight for Glass is a voice-controlled Glass-mounted flashlight. After installing the XE16-compatible APK program you can control your Flashlight at any time by saying "OK Glass Toggle Flashlight". Tested with the latest 17.2 OS. Requires...

DISCONTINUED

Flora RGB Smart NeoPixel version 1 - Pack of 4

PRODUCT ID: 1060

Please note, this is the last batch of the V1 Neopixels we are making, please do not purchase the old version unless you have an older project with...

Please note, this is the last batch of the V1 Neopixels we are making, please do not purchase the old version unless you have an older project with V1 pixels and you need the pixels to match! We will only be carrying V2 pixels after this batch runs out What's a wearable project without LEDs? Our favorite part of the Flora platform is these tiny smart pixels. Designed specifically for wearables, we found the brightest RGB LEDs available (an...

DISCONTINUED

Fabric Ribbon 4-Channel Wire - 1 yard

PRODUCT ID: 1373

This lightweight, flexible fabric ribbon channel contains four individual wires, perfect for wiring up wearables where flexibility is key. This...

This lightweight, flexible fabric ribbon channel contains four individual wires, perfect for wiring up wearables where flexibility is key. This ribbon has 4 x 28AWG stranded-core wires, easy to solder but also quite flexible. There's no risk of accidental shorts since each wire is sleeved, and you can also pass a fair bit of current Features: Ultra-low resistance: ~0.25 Ω / m 4 Conductor connections Power and data applications Sewable...

DISCONTINUED

Eeonyx Stretchy Variable Resistance Sensor Fabric - LTT-SLPA-20K

PRODUCT ID: 3669

Soft and stretchy, this Eeonyx Stretchy Variable Resistance Sensor fabric is great for making soft sensors or wearables that need to...

Soft and stretchy, this Eeonyx Stretchy Variable Resistance Sensor fabric is great for making soft sensors or wearables that need to adjust and move. This is a bidirectionally stretchy nylon+spandex fabric coated with a long-lasting conductive coating that changes resistance when you pull on it! It's perfect for making stretch or strain sensors, by measuring the resistance change from one end of the fabric to the other -...

DISCONTINUED