LEDs / RGB Matrices

Bullseye! This disk is chock full of *255* Dotstar LEDs and it's BRIGHT! The Dotstar RGB LED Disk is sprinkled with digitally-addressable LEDs, comes on a white PCB with two 4 pin JST-SM connectors already soldered to it so it's ready to rock straight out of the box. These are the same integrated LEDs that are used in our new fancy DotStar strips. This tiny 5050 (5mm x 5mm) SMD LED is the most compact way possible to integrate...

Bring a little bit of Times Square into your home with this 16 x 32 RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. They have 512 bright RGB LEDs arranged in a 16x32 grid on the front. On the back there is a PCB with two IDC...

Put on your sunglasses before wiring up this LED matrix - 64 eye-blistering RGB LEDs adorn the NeoMatrix for a blast of configurable color. Arranged in an 8x8 matrix, each pixel is individually addressable. Only one microcontroller pin is required to control all the LEDs, and you get 24 bit color for each LED. Wiring it up is easy: there are two 3-pin connection ports. Solder wires to the input port and provide 5VDC to the +5V and ground pins,...

Bring a little bit of Times Square into your home with this sweet 32 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. They have 1024 bright RGB LEDs arranged in a 32x32 grid on the front on a 6mm grid . On the...

Bring a little bit of Times Square into your home with this totally adorable 5 inch square 32 x 32 RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. They have 1024 bright RGB LEDs arranged in a 32x32 grid on the front with 4mm...

Put on your sunglasses before putting this shield onto your 'duino - 40 eye-blistering RGB LEDs adorn the NeoPixel shield for a blast of configurable color. Arranged in a 5x8 matrix, each pixel is individually addressable. Only one pin (Digital #6) is required to control all the LEDs. You can cut a trace and use nearly any other pin if you need some customization. To make it easy to start, the LEDs are by default powered from the 5V onboard...

For advanced NeoPixel fans, we how have a bendable, flexible 8x32 NeoPixel LED Matrix! Control all 256 ultra-bright LEDs using a single microcontroller pin, set each LED as you wish to scroll messages or draw little images. This matrix has a thick flexible PCB backing that can be gently bent and curved around surfaces You can use this matrix just like any other NeoPixel-compatible product, and we even have NeoMatrix code that will let you use...

Bring a little bit of Times Square into your home with this sweet 64 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. This version is the 3mm pitch 64x32 RGB LED Matrix. Please note you cannot use an Arduino UNO to...

Bring a little bit of Times Square into your home with this sweet 64x32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool, so we picked up a few boxes of them from a factory. This version is the 5mm pitch 64x32 RGB LED Matrix. Please note you cannot use an Arduino UNO to...

Bring a little bit of Times Square into your home with this sweet 32 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. These are a lot like our 6mm Grid 32x32 RGB LED matrix panel, but The LEDs on this panel are...

Bring a little bit of Times Square into your home with this sweet 64 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. This version is the 4mm pitch 64x32 RGB LED Matrix. Please note you cannot use an Arduino UNO to...

Bring a little bit of Times Square into your home with this sweet 64x32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. This version is the 6mm pitch 64x32 RGB LED Matrix. Please note you cannot use an Arduino UNO to...

For advanced NeoPixel fans, we how have a bendable,  Flexible 8x8 NeoPixel LED Matrix! Control all 64 ultra-bright LEDs using a single microcontroller pin, set each LED as you wish to scroll messages or draw little images. This matrix has a thick flexible PCB backing that can be  gently bent and curved around surfaces You can use this matrix just like any other NeoPixel-compatible product. With 64 LEDs, you can have up to 4A...

Put on your sunglasses before wiring up this LED matrix - 64 eye-blistering RGB LEDs adorn the Adafruit DotStar Matrix  for a blast of configurable color. Arranged in an 8x8 matrix, each pixel is individually addressable. Only one microcontroller pin is required to control all the LEDs, and you get 24 bit color for each LED.  With 64 LEDs, you can have up to 4A of current draw if all the LEDs are on bright white. You can use our 5V 4A,...

For advanced DotStar LED fans, we now have a bendable, Flexible 16x16 Dotstar LED Matrix ! Control all 256 ultra-bright LEDs using only two microcontroller pins, set each LED as you wish to scroll messages or draw little images. This matrix has a thick flexible PCB backing that can be gently bent and curved around surfaces These are the same integrated LEDs that are used in our new fancy DotStar strips. This tiny 5050 (5mm x 5mm) SMD...

For advanced DotStar fans, we how have a bendable, flexible 8x32 DotStar LED Matrix! Control all 256 ultra-bright LEDs using only 2 microcontroller pins, set each LED as you wish to scroll messages or draw little images. This matrix has a thick flexible PCB backing that can be gently bent and curved around surfaces These are the same integrated LEDs that are used in our new fancy DotStar strips. This tiny 5050 (5mm x 5mm) SMD LED is...

Got a glorious RGB Matrix project you want to mount and display in your workspace or home? If you have one of the matrix panels listed below, you'll need a pack of these Mini-Magnet Feet.  We got these specifically for our RGB LED Matrices, which no longer include mounting equipment. At 16.6mm long, these magnet-screws slot perfectly into the panel mounting holes.  Works with any RGB matrices with 3mm mounting bosses...

Do not eat this LED grid just because it is so colorful and bite-sized! This is the tiniest little LED grid we could make, with 64 full RGB color pixels in a square that is only 1" by 1" square (thats 25.4mm x 25.4mm for you metric-lovers). Best of all, these are little DotStar LEDs, with built in PWM drivers, so you only need two digital I/O pins to get a-glowin'. But do not be fooled by their small size, each LED is still...

Winter time can be rough in the city. The sky is gray. The weather is unpredictable. So slough off those seasonal blues with some Times Square razzle dazzle from this sweet, ultra-high-density 64x64 RGB LED Matrix . These panels are typically used to make video walls. Here in New York we see them on the sides of buses and on top of taxi cabs displaying animations or video advertisements. We thought they looked really cool, so...

If you missed out on AdaBox016, it's not too late for you to pick up the parts necessary to build many of the projects! It doesn't come with tissue paper or the nifty extras, but it does have all the electronic goodies you need. This contains the essentials from AdaBox016 a.k.a The Adabox Halloween Pixel Show - check out all the learning guide project ideas here. And is perfect for constructing our MatrixPortal projects. There...

Bring a little bit of Times Square into your home with this sweet 64 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. This version is the 2.5mm pitch 64x32 RGB LED Matrix. Please note you cannot use an Arduino UNO...

If you've played with multiplexed RGB matrices, you may have wondered "hey, could we possibly manufacture these on a thin enough PCB, so it's flexible?" and the answer is  Yes!  This LED panel is just like rigid 64x32 style ones, but without the plastic supports. This matrix has a thin, bendable PCB backing that can be  gently bent and curved  around surfaces.  Please note:  Flexible PCBs are...

Winter time can be rough in the city. The sky is gray. The weather is unpredictable. So slough off those seasonal blues with some Times Square razzle dazzle from this sweet, ultra-high-density 64x64 RGB LED Matrix . These panels are typically used to make video walls. Here in New York we see them on the sides of buses and on top of taxi cabs displaying animations or video advertisements. We thought they looked really cool, so...

So you have a fresh and fancy Teensy 4 and an RGB LED Matrix Panel and you want an easy way to add graphics to your matrix without having to toss aside your Teensy or do too much soldering. Enter the  SmartMatrix SmartLED Shield for Teensy 4! The SmartLED Shield gives you an easy way to connect up a Teensy 4 or a Teensy 4.1 to one of our RGB LED Matrix Panels. The example sketches included with the SmartMatrix Library...

Ahoy! It's time to create a dazzling light up project with our new RGB Matrix FeatherWing for nRF52840 . Now you can quickly and easily create projects featuring your favorite 16 or 32-pixel tall matrix boards. Using our RGB Matrix library is easy and works wonderfully with our nRF52840 based Feathers.  Please note: This 'Wing is only tested/designed to work with the nRF52840 Feathers (Express and Sense). It's not for use with...

Here's a handy power cable for the RGB LED Matrix Panels we carry. Easily plug into the back of your RGB matrix and insert or screw the power and ground cables onto either the Matrix Portal or the Matrix Bonnet, or whichever microcontroller-and-add-on you're using for your RGB Matrix project. Works with any/all RGB LED Matrices that are 'HUB75' style. Not for use with NeoPixel or Dotstar matrices.

If you've played with multiplexed RGB matrices, you may have wondered "hey, could we possibly manufacture these on a thin enough PCB so it's flexible?" and the answer is Yes! This LED panel is just like rigid 64x32 style ones, but without the plastic supports. This matrix has a thin, bendable PCB backing that can be gently bent and curved around surfaces.  Please note: Flexible PCBs are not designed for repeated...

For advanced NeoPixel fans, we now have a bendable, Flexible 16x16 NeoPixel LED Matrix ! Control all 256 ultra-bright LEDs using a single microcontroller pin, set each LED as you wish to scroll messages or draw little images. This matrix has a thick flexible PCB backing that can be gently bent and curved around surfaces You can use this matrix just like any other NeoPixel-compatible product. Don't forget, with 256 LEDs, you could use over...

Like our 16x32 RGB Matrix panel? Want to have it glowing fast? This pack comes with a panel, a Nootropic's Arduino-compatible backpack and a power supply so you can integrate the panel easily to your project and keep it compact. This pack comes with the following Adafruit 16x32 RGB Matrix Panel with cables - 512 RGB LEDs for you to control!Nootropic Matrix Panel Backpack kit5V 2A Power supply - UL listed and works with 100-240VAC The RGB...

The RGB Matrix Backpack is a small board that connects to the back of the Adafruit 16x32 RGB LED Matrix Panel and is a very convenient way to control this awesome panel. The board is simply a small Arduino. You can easily program the board using the Arduino IDE. As you can see from the video below, it's possible to create great color animations, completely in Arduino programming! Kit comes unassembled, Adafruit 16x32 RGB LED Matrix Panel not...

The RGB Matrix Backpack is a small board that connects to the back of the Adafruit 32x32 RGB LED Matrix Panel and is a very convenient way to control this awesome panel. The board is simply a small Arduino. You can easily program the board using the Arduino IDE. As you can see from the video below, it's possible to create great color animations, completely in Arduino programming! Kit comes unassembled, Adafruit 32x32 RGB LED Matrix Panel not...

You can spruce up your home with DIY Jenny Holtzer LED art with a 16x32 rectangular Red and Green LED matrix panel. These panels are similar to ones you'd see in scrolling LED information signs, and they can be used to display text or simple animations. Note this matrix only has red and green LEDs, they can be both turned on to make...yellow! But if you want full color excitement, check out 16 x 32 RG B LED matrices here! (They require...