Wireless / Cellular

This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on them. This little cable will bridge the two! This cable is RG178 and is 15cm (5.9") long not including the SMA...

This 2.4"/61mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Antenna comes with a SMA connector, which is the most common type you'll see for Cellular development boards. If you need to connect this to an RP-SMA...

This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on them. This little cable will bridge the two! This cable is RG178 and is 15cm (5.9") long not including the RP-SMA...

Swapping around your SIM card into different devices? This trio of SIM adapters helps so that you can use one SIM card for various size-needs. Two adapters fit Nano-SIMs (~12mm x ~9mm x ~0.7mm) and one fits Micro-SIMs (~15mm x ~12mm x ~0.8mm). In our two examples we broke down our GSM 2G SIM Card from Ting & Adafruit to it's smallest Nano self. Once in the...

That's one slim cellular antenna! At 238mm long from tip to tip and and with a cable thickness of just 2mm, this 3dBi GSM antenna is slim, compact and sensitive, with a 3dBi gain. The antenna juts out from its base with stick-on back so you attach it to an enclosure if you're making something like, say, a DIY phone. It has a tiny uFL connector on the end - which is...

This 2.2"/57mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Antenna comes with a Right-angle SMA connector. If you need to connect this to an RP-SMA connector for some reason, use this handy adapter and if you need...

That's one slim cellular antenna! At just 75mm long from tip to tip and and with a thickness of just 2mm, this 3dBi GSM antenna is slim, compact and sensitive, with a 3dBi gain. The antenna juts out from its base with stick-on back so you attach it to an enclosure if you're making something like, say, a DIY phone. It has a tiny uFL connector on the end - which is...

The Spresense LTE Extension Board adds LTE connectivity to the Spresense main board and carries an onboard antenna and a nanoSIM cardholder. It also extends the interfaces of the Spresense main board with multiple mic inputs, a headphone jack, and a microSD card slot. The Spresense main board and the Spresense LTE extension board are connected by a board-to-board...

For those who want to take it to the next level we now have a 3G Cellular Modem breakout! The FONA 3G has better coverage, GSM backwards-compatibility and even sports a built-in GPS module for geolocation & asset tracking. This all-in-one cellular phone module with that lets you add location-tracking, voice, text, SMS and data to your project in a single...

The RockBLOCK 9603 allows you to send and receive short messages from anywhere on Earth with a clear view of the sky. And when we say anywhere we mean anywhere. It works far beyond the reach of WiFi and GSM networks. Maybe you want to transmit weather information from mid-ocean? Or use it to control your robot in the middle of the desert? Perhaps you need emergency...

This is the version that comes with a FREE Ting 2G Sim Card! Please note if you need to use a 3G network you will need to use an AT&T 3G SIM card as the Ting SIM is 2G only. For those who want to take it to the next level we now have a 3G Cellular Modem breakout! The FONA 3G has better coverage, GSM backwards-compatibility and even sports a built-in GPS module...

Ring, Ring! Who's that callin'? It's your breadboard! Introducing Adafruit FONA MiniGSM, an adorable all-in-one cellular phone module that lets you add voice, text, SMS and data to your project in an adorable little package. Please note: The T-Mobile GSM network is shutting down in the USA over the course of 2020 and beyond, so please be aware these are not for long...

Ring, Ring! Who's that callin'? It's your breadboard! Introducing Adafruit FONA MiniGSM, an adorable all-in-one cellular phone module that lets you add voice, text, SMS and data to your project in an adorable little package. This module measures only 1.75"x1.25" but packs a surprising amount of technology into its little frame. At the heart is a GSM cellular module...

Cellular + GPS tracking, all in one? Oh yes! Introducing Adafruit FONA 808 MiniGSM + GPS, an all-in-one cellular phone module with that lets you add location-tracking, voice, text, SMS and data to your project in an adorable little package. (It does not contain a drum machine, tho) This module measures only 1.75"x1.6" but packs a surprising amount of technology into...

Ring, Ring! Who's that callin'? It's your Arduino! Introducing Adafruit FONA 800 Shield, an adorable all-in-one cellular phone shield that lets you add voice, text, SMS and data to your project in an easy to use pluggable shield. This shield fits on top of any classic Arduino or compatible, and packs a surprising amount of technology into it's little frame. At the...

Cellular + GPS tracking, all in one, for your Arduino? Oh yes! Introducing Adafruit FONA 808 GSM + GPS Shield, an all-in-one cellular phone module with that lets you add location-tracking, voice, text, SMS and data to your project, in Arduino shield format for easy use. Please note: The T-Mobile GSM network which is shutting down in the USA over the course of 2020...

Adafruit is now a phone company :) Or, well, we've sold DIY cell phones for awhile now but you've never been able to buy your FONA and a SIM Card all in one place. Now, with these GSM Sim Cards from Ting, you can turn your FONA project into a working cell phone with just your maker skills and a visit to their website. WARNING: Ting works on the T-Mobile 2G GSM...

Discontinued - you can grab Adafruit FONA 808 Shield - Mini Cellular GSM + GPS for Arduino instead! Build your own cellular project and get off the grid with FONA. This pack comes with an uFL-antenna type FONA and paired with hand-picked accessories. It's the Adafruit FONA 800 Shield Starter Pack. The FONA 800 Shield, is an adorable all-in-one cellular phone shield...

Build your own cellular project and get off the grid with FONA. This pack comes with an SMA-antenna type FONA and paired with hand-picked accessories. It's the Adafruit FONA - SMA Starter Pack. The FONA miniGSM is an adorable all-in-one cellular phone module that lets you add voice, text, SMS and data to your project in an adorable little package. This module...

Build your own cellular project and get off the grid with FONA. This pack comes with an uFL-antenna type FONA and paired with hand-picked accessories. It's the Adafruit FONA - uFL Starter Pack. The FONA miniGSM is an adorable all-in-one cellular phone module that lets you add voice, text, SMS and data to your project in an adorable little package. This module...

The SIM808 GSM GPRS Module is at the heart of our Adafruit FONA 808 - Mini Cellular GSM + GPS Breakout. For people who want to integrate a cellular (GSM/GPRS) module into their design without the full breakout, this hand-solderable module is pretty nice! Please note we don't provide any tech support for this module, but we do have a schematic as well as a collection...

Add SIM-card capabilities to your next project with this SIM Card Holder. It works great with any Mini-SIM (25mm x 15mm x ~0.8mm) including our GSM 2G SIM Card from Ting & Adafruit. It's not too bad to solder, the pads are pretty large, even though its surface mount. Each order comes with one holder, no SIM card included. To use in your Eagle CAD project, check...

For those who want to take it to the next level we now have a 3G Cellular Modem breakout! The FONA 3G has better coverage, GSM backwards-compatibility and even sports a built-in GPS module for geolocation & asset tracking. This all-in-one cellular phone module with that lets you add location-tracking, voice, text, SMS and data to your project in a single...

For those who want to take it to the next level we now have a 3G Cellular Modem breakout! The FONA 3G has better coverage, GSM backwards-compatibility and even sports a built-in GPS module for geolocation & asset tracking. This all-in-one cellular phone module with that lets you add location-tracking, voice, text, SMS and data to your project in a single...

The Nordic Thingy:91 is an easy-to-use battery-operated prototyping platform for cellular IoT using LTE-M, NB-IoT, and GPS. It is ideal for creating Proof-of-Concept demos, and initial prototypes in your IoT development phase. Thingy:91 is built around the nRF9160 SiP and is certified for a broad range of LTE bands globally, meaning the Nordic Thingy:91 can be used...

The Electron is a small cellular IoT board made by Particle. This tiny development kit has everything you need for creating 3G cellular connected products. Includes a prepaid, no contract data plan and instant web access to your Electron with wireless programming. Kit includes: Microcontroller. Particle SIM card with service in more than 100 countries worldwide. 3...

Woohoo, it's time for a Particle Mesh party! So why not cater for connectivity with the Particle Mesh LTE Bundle, a veritable smörgåsbord (yum!) to begin building mesh networking for your IoT project. Particle Mesh means you can create local networks that collect data, share messages, and connect to the Internet through a Particle gateway. The bundle comes...

The Electron is a small cellular IoT board made by Particle. This tiny development kit has everything you need for creating 2G cellular connected products. Includes a prepaid, no contract data plan and instant web access to your Electron with wireless programming. Kit includes: Microcontroller. Particle SIM card with service in more than 100 countries worldwide. 3...

The Electron is a small cellular IoT board made by Particle. This tiny development kit has everything you need for creating 3G cellular connected products. Includes a prepaid, no contract data plan and instant web access to your Electron with wireless programming. Kit includes: Microcontroller. Particle SIM card with service in more than 100 countries worldwide. 3...

Some of us just can't make up our minds: just deciding what to have for dinner is a major decision process. We want it all! And now we can have it all, with this python-powered internet-of-things powerhouse. It's like getting to have pizza AND sushi AND tacos AND casserole AND a burger for dinner, wow! Imagine five networks in one perfectly-formed,...

With WiFi, Bluetooth® Low Energy, and cellular LTE CAT M1/NB1, the Pycom GPy is a triple-bearer MicroPython enabled micro controller - the perfect enterprise grade IoT platform for your connected Things. Create and connect your things everywhere, fast. Imagine three networks in one perfectly-formed, same-small-foot-print-as-WiPy-LoPy-FiPy-and-SiPy, IoT...

Discontinued - you can grab Particle Argon - nRF52840 with Mesh and WiFi instead! Woohoo, it's time for a Particle Mesh party! So why not cater for connectivity with the Particle Mesh 2G/3G Cellular Bundle, a veritable smörgåsbord (yum!) to begin building mesh networking for your IoT project. Particle Mesh means you can create local networks that collect...

As of January 17, 2023 - the Boron LTE is now powered by EtherSIM, Particle's new globally available, self-optimizing SIM with no data plans or device fees. Particle's Free Plan supports up to 100 devices, cellular data, and fully-featured platform access with no time limit. Woohoo, it's time for a Particle Mesh party! And the Particle Boron LTE is bringing it with a...

Discontinued - you can grab Particle Boron LTE Kit - nRF52840 with LTE Cellular Modem instead! Woohoo, it's time for a Particle Mesh party! So why not cater for connectivity with the Particle Mesh 2G/3G Cellular, a veritable smörgåsbord (yum!) to begin building mesh networking for your IoT project. Particle Mesh means you can create local networks that...

Discontinued - you can grab the Nordic Thingy: 91 nRF91 Cellular Development Board - NRF6943 instead! Woohoo, it's time for a Particle Mesh party! And the Particle Boron LTE is bringing it with a double-dose of Bluetooth Low Energy and LTE Cellular - so you're covered for network connectivity, no matter where you are. The Boron LTE is a powerful LTE CAT-M1/NB1...

This antenna is a perfect addition to your cellular project with LTE connectivity. It's specifically intended for use with the Pycom LTE-powered kits but it's just a passive antenna so you can pair it with any dev board you like, as long as it has a uFL connector. Comes with a flexible copper grounding sticker, you can use to provide a nice big ground plane!