Wireless / WiFi

Get your Particle (formally known as Spark) Photon moving with a PhoBot Robotics shield. No, this is not a robot that makes you a delicious bowl of Vietnamese soup. Instead, it's a board from Simon Monk that's kind of like a Motorshield for your Spark Core or Particle Photon that makes controlling small robots easy! The board features bi-directional motor control...

Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. We do sell these on a breakout, but maybe you wanna just put this in your own project PCB....

The ESP32-S3 has arrived in QT Py format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this QT Py is great for powering your IoT projects. The ESP32-S3 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has WiFi and BLE support,...

The ESP32-S3 has arrived in QT Py format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this QT Py is great for powering your IoT projects. Now we even have this powerhouse of a board with built in 2 Megabytes of PSRAM for when you need to buffer large datasets in...

What has your favorite Espressif WiFi microcontroller, comes with our favorite connector - the STEMMA QT, a chainable I2C port, and has lots of Flash and RAM memory for your next IoT project? What will make your next IoT project flyyyyy? What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite lil chips, the ESP32-S2! The...

What's smaller than a Feather but larger than a Trinket? It's an Adafruit ItsyBitsy ESP32, a powerful processor PCB with a plethora of pins! It features the ESP32 Pico module, an FCC-certified module that contains an ESP32 chip with dual-core 240MHz Tensilica processor, WiFi, and Bluetooth® classic + BLE, configured with 8 MB of Flash memory, and 2 MB of PSRAM....

This dev board is like when you're watching a super-hero movie and the protagonist shows up in a totally amazing costume in the third act and you're like 'OMG! That's the hero and they're here to kick some serious butt!" but in this case its a microcontroller. This QT Py board is a thumbnail-sized PCB that features the ESP32 Pico V3 02, an all-in-one chip that has an...

The ESP32-C6-DevKitC-1-N8 is an entry-level development board equipped with ESP32-C6-WROOM-1, a general-purpose Wi-Fi + Bluetooth® LE RISC-V MCU module that integrates complete Wi-Fi and Bluetooth® LE functions. This board integrates complete Wi-Fi, Bluetooth® LE, Zigbee, and Thread functions. This version is equipped with the ESP32-C6-WROOM-1 with 8MB...

Introducing the FeatherS3[D] - The pro ESP32-S3 Development Board in the Feather Format! FeatherS3[D] includes an onboard antenna and a u.FL connector for an external antenna on the same board, and you can switch which antenna to use via the RF switch on the fly from inside your code! Two antenna options - one board! The onboard antenna is selected by default, so you...

Introducing the TinyS3[D] - The Tiny Mighty ESP32-S3 development board in the TinyPICO format! TinyS3[D] includes an onboard antenna and a u.FL connector for an external antenna on the same board, and you can switch which antenna to use via the RF switch on the fly from inside your code! Two antenna options - one board! The onboard antenna is selected by default, so...

TinyPICO is the world’s smallest, fully-featured ESP32 development board, designed to unlock the power of the ESP32’s dual-core 240MHz and internet connectivity, in a package smaller than your thumb! Your very own TinyPICO V3 with USB-C and with MicroPython pre-installed. Comes with unassembled male headers and a JST PH battery connector. Please: This is...

ESP32-C6-WROOM-1-N8 is an ESP32-C6-based module, which supports WiFi 6 in a 2.4GHz band, Bluetooth® 5, Zigbee 3.0, and Thread. It's pin-to-pin compatible with the ESP32-WROOM series module. With low-power consumption, it is an ideal choice for a variety of IoT devices! This module comes with 8 MB Quad SPI Flash memory. Features: 32-bit RISC-V single-core...

Add a cool touch-screen rotary dial to your next build with the M5Stack M5Dial. The M5Dial integrates the necessary features and sensors for various smart home control applications as a versatile embedded development board. It features a 1.28-inch round TFT touchscreen, rotary encoder, RFID detection module, RTC circuit, buzzer, and under-screen 'selection' button,...

ESP32-H2-MINI-1 is a powerful, generic Bluetooth® Low Energy and IEEE 802.15.4 combo module that has a rich set of peripherals. This module is an ideal choice for a wide variety of application scenarios related to Internet of Things (IoT), such as embedded systems, smart home, wearable electronics, etc. At the core of this module is ESP32-H2, a 32-bit RISC-V...

Introducing the ProS3[D] - The Ultimate Pro ESP32-S3 Development Board! Two antenna options - one board! ProS3[D] includes an onboard antenna and a u.FL connector for an external antenna on the same board, and you can switch which antenna to use via the RF switch on the fly from inside your code! The onboard antenna is selected by default, so you never need to worry...

What's smaller than a Feather but larger than a Trinket? It's an Adafruit ItsyBitsy ESP32 with a wFL external Antenna Connection, a powerful processor PCB with a plethora of pins! It features the ESP32 Pico module, an FCC-certified module that contains an ESP32 chip with dual-core 240MHz Tensilica processor, WiFi, and Bluetooth® Classic + BLE, configured with 8...

Pixelblaze is a Wi-Fi Addressable LED Controller and Custom Pattern Editor, powered by an ESP32 module with 240Mhz dual-core processor for 'blazingly fast' pixel rendering capabilities. This is the Pixelblaze V3 Standard which has additional interface and expansion capabilities. It can interface with hardware and sensors using GPIO, analog, or touch inputs. It has an...

Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with SSL support and rock solid performance - running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we...

Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with SSL support and rock solid performance - running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we...

Introducing the TinyS2 - The Tiny Mighty ESP32-S2 development board in the TinyPICO format! This board features the powerful ESP32-S2, a single-core Tensilica processor with WiFi and native USB so it can run Arduino or Circuitpython code. The ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has built-in native USB as...

Ever wanted to dabble in face and/or speech recognition? Espressif's ESP-S3-EYE is a miniature AI development board. It is based on the ESP32-S3 SoC and ESP-WHO, Espressif’s AI development framework. It features a 2-Megapixel camera, an LCD display, and a microphone, which are used for image recognition and audio processing. ESP32-S3-EYE offers plenty of memory...

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth® support, and dual 240 MHz cores. Now get ready to take your IoT designs to the next level with the ESP-S2-WROVER WiFi Module! The ESP32-S2 is a...

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth® support, and dual 240 MHz cores. Now get ready to take your IoT designs to the next level with the ESP32-S2-WROOM WiFi Module! The ESP32-S2 is a...

ESP32-WROOM-DA (the DA is for Dual Antenna) is a powerful Wi-Fi + Bluetooth® Classic + Bluetooth® LE MCU module, with two complementary PCB antennas in different directions. Packed with 8 MB of internal QSPI Flash, it has lots of memory and great WiFi connectivity no matter where or how it is installed. ESP32-WROOM-DA is pin-to-pin compatible with...

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabilities to the next level with the ESP-WROVER-32 WiFi / Bluetooth® Classic / BLE Module! This modules is even more powerful than the WROOM-32 - it has a...

Give your ItsyBitsy project a lift with the Adafruit AirLift Bitsy Add-On - a daughterboard that lets you use the powerful ESP32 as a WiFi co-processor. You probably have your favorite ItsyBitsy (like the Itsy' M4) that comes with its own set of awesome peripherals and lots of libraries. But it doesn't have WiFi built in! So lets give that chip a best friend, the...

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-2, a general-purpose Wi-Fi + Bluetooth® Low Energy MCU module that integrates complete Wi-Fi and Bluetooth® LE functions. This version is equipped with the ESP32-S3-WROOM-2 (PCB antenna) with 32MB Flash and 8MB PSRAM. Please note: The S3 is similar to the ESP32-S2 - but...

What's life without a little RISC? This miniature dev board is perfect for small projects: it comes with our favorite connector - the STEMMA QT, a chainable I2C port, WiFi, Bluetooth® LE, and plenty of FLASH and RAM memory for many IoT projects. What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with a RISC-V IoT microcontroller, the ESP32-C3!...

The ESP32-C3-DevKitM-01 is an entry-level development board equipped with the ESP32-C3-MINI-01, a powerful, generic Wi-Fi + Bluetooth® LE MCU module that features a rich set of peripherals, yet an optimized size. It's an ideal choice for a wide variety of application scenarios related to the Internet of Things (IoT), such as embedded systems, smart homes,...

What has your favorite Espressif WiFi microcontroller, comes with our favorite connector - the STEMMA QT, a chainable I2C port, and has lots of Flash and RAM memory for your next IoT project? What will make your next IoT project flyyyyy? What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite lil chips, the ESP32-S2, and a...

With its freely available development resources, ESP32-S3-BOX-3 is the ultimate choice for prototyping new projects or building complex AIoT systems. Espressif Systems (688018.SH) is excited to announce the latest addition to its lineup of development kits, ESP32-S3-BOX-3. This fully open-source AIoT development kit is based on the powerful ESP32-S3 AI SoC, and is...

ESP32-C3-DevKit-RUST-1 is an entry-level RISC V development board equipped with the ESP32-C3-MINI-1, a powerful, generic Wi-Fi + Bluetooth® LE MCU module that features a rich set of peripherals, yet an optimized size. It's an ideal choice for a wide variety of application scenarios related to the Internet of Things (IoT), such as embedded systems, smart homes,...

ESP32-H2-DevKitM-1 is an entry-level development board based on Bluetooth® Low Energy and IEEE 802.15.4 combo modules ESP32-H2-MINI-1. Most of the I/O pins on the ESP32-H2-MINI-1 module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-H2-DevKitM-1 on a...

This is the ESP32-S3-BOX-3B bare-bones version of ESP32-S3-BOX-3 kit without add-ons. Click here for the standard ESP32-S3-BOX-3 kit edition which comes with more sensors! With its freely available development resources, ESP32-S3-BOX-3 is the ultimate choice for prototyping new projects or building complex AIoT systems. Espressif Systems (688018.SH) is excited to...

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabilities to the next level with the ESP32 Development Board! The development board breaks out all the module’s pins to 0.1″ headers and provides...

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth® LE functions. This version is equipped with the ESP32-S3-WROOM-1 (PCB antenna) with 8MB Flash and 8MB PSRAM. Please note: The S3 is similar to the ESP32-S2 - but adds a dual...

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth® LE functions. This version is equipped with the ESP32-S3-WROOM-1 (PCB antenna) with 8MB Flash and 8 MB PSRAM. Please note: The S3 is similar to the ESP32-S2 - but adds a...

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth® support, and dual 240 MHz cores. Now get ready to take your IoT designs to the next level with the ESP32-S2-WROVER-1 WiFi Module! The ESP32-S2 is...

ESP32-C6-WROOM-1-N4 is an ESP32-C6-based module, which supports WiFi 6 in a 2.4GHz band, Bluetooth® 5, Zigbee 3.0, and Thread. It's pin-to-pin compatible with the ESP32-WROOM series module. With low-power consumption, it is an ideal choice for a variety of IoT devices! This module comes with 4MB SPI Flash Features: 32-bit RISC-V single-core processor that...

For years we've seen all sorts of microcontroller-friendly WiFi modules but none of them were really Adafruit-worthy. Either they were too slow, or too difficult to use, or required signing an NDA, or had limited functionality, or too expensive, or too large. So we shied away from carrying any general purpose microcontroller-friendly WiFi boards. NO LONGER! The...

For years we've seen all sorts of microcontroller-friendly WiFi modules but none of them were really Adafruit-worthy. Either they were too slow, or too difficult to use, or required signing an NDA, or had limited functionality, or too expensive, or too large. So we shied away from creating or developing a WiFi Arduino shield. NO LONGER! The CC3000 hits that sweet...

What is the electric imp? In essence, the Imp provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. It's more than just a WiFi card, or even a WiFi module with processing built in - it's an integrated platform that deals with the drudgery of connectivity, allowing you to concentrate on the application...

For years we've seen all sorts of microcontroller-friendly WiFi modules but none of them were really Adafruit-worthy. Either they were too slow, or too difficult to use, or required signing an NDA, or had limited functionality, or too expensive, or too large. So we shied away from carrying any general purpose microcontroller-friendly WiFi boards. NO LONGER! The...

The April is a handy companion for your Electric Imp card. This breakout board provides just the bare minimum for Imp life support - a socket, an ID chip, and a 3.3v buck power supply for high power efficiency. Small and cheap, it's easy to integrate into products for demos or even use in low-volume production. Dimensions: 51mm x 32mm x 6mm (without header) or 11mm...

For years we've seen all sorts of microcontroller-friendly WiFi modules but none of them were really Adafruit-worthy. Either they were too slow, or too difficult to use, or required signing an NDA, or had limited functionality, or too expensive, or too large. So we shied away from creating or developing a WiFi Arduino shield. NO LONGER! The CC3000 hits that sweet...

The same team that built Roving Networks is now at ACKme, where they're designing the future of WiFi connectivity. Their first release is the ACKme WiConnect, a super-smart WiFi module that has a lot of built-in capability such as SSL, AP mode, auto-connection, etc.The AMW004-E03 ‘Mackerel’ evaluation board provides a quick and easy way to evaluate and...

Add both WiFi and Bluetooth capability to your computer super fast with this USB Bluetooth / WiFi Dongle! This little two-faced cutie is so versatile! It's WiFi half can be used to make Internet of Things devices cable-free or we also love to take advantage of the Raspberry Pi and BeagleBone USB ports to add a low cost, but high-reliability wireless link. The...

The Spark Core has level-ed up, we now stock the Particle Photon, the upgrade to this product! The Photon is more powerful, faster, and less expensive, so check it out here. Have you been searching for that perfect Internet of Things dev kit? The Spark Core is a microcontroller that will get your IoT troubles behind you. The Spark Core is a complete Wi-Fi enabled...

This interesting module is a lot of fun for hobbyists and students who are interested in experimenting with the ESP8266 WiFi chipset. We bought a bunch of these modules, updated the firmware to the much-easier-to-use v0.924 and wrote some Arduino code to grab a webpage. We do not have a detailed tutorial at this time, this chipset/module is for the curious and...

ESP32-S2 Saola-1 is a small-sized ESP32-S2 based development board produced by Espressif. Just about all of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S2 Saola-1 on a breadboard - we recommend two breadboards 'side-by-side' since the Saola is a bit wide...

TinyPICO is the world’s smallest, fully-featured ESP32 development board, designed to unlock the power of the ESP32’s dual-core 240MHz and internet connectivity, in a package smaller than your thumb! Please note: This is the u.FL version of the TinyPICO USB-C. Click here for the PCB antenna version. TinyPICO V2 with Micro-B is still available over here!...

OK you've signed up for Adafruit.io and you're ready to build something cool and Internet-connected. All you need is this starter kit which will get you going with lots of parts that go very well with our service and are the most common sensors and actuators you may want. Sense light, motion, humidity, temperature, and more, then send it for storage on adafruit.io!...

Introducing the TinyS3 - The Tiny Mighty ESP32-S3 development board in the TinyPICO format! TinyS3 is the latest in Unexpected Maker's super popular range of "Tiny" development boards. It's packed with amazing features and peripherals, wireless connectivity, and stacks of Flash and PSRAM, all in the same tiny package size as the original TinyPICO! The TinyS3 ships...

The ESP32-S3-Korvo-2 is a multimedia development board based on the ESP32-S3 chip. It is equipped with a two-microphone array, which is great for voice recognition and near/far-field voice wake-up applications. The board can integrate multiple peripherals such as LCD, camera, and microSD card. It also supports JPEG video stream processing. With all of its outstanding...

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabilities to the next level with the ESP-WROOM-32 WiFi / Bluetooth® Classic / Bluetooth® Low Energy Module! According to Espressif, the ESP-WROOM-32...

Need an easy-to-use but powerful control solution for more industrial-type projects? Get the controller that does exactly what you want in a sturdy, contained package. Combine Arduino simplicity, ESP8266 WiFi connectivity, and Digital Logger's experience and reliability to customize your own PLC for controlling industrial and robotics projects. Digital Loggers...

Introducing the ProS3 - The Ultimate Pro ESP32-S3 Development Board now with a u.FL connector instead of an onboard antenna, for the times when you want to connect an external antenna for longer radio range, or for putting your S3 boards inside a case/enclosure. The ProS3 ships with the latest version of CircuitPython with ESP32-S3 support. It also ships with the UF2...

Introducing the FeatherS3 - The pro ESP32-S3 Development Board in the Feather Format now with a u.FL connector instead of an onboard antenna, for the times when you want to connect an external antenna for longer radio range, or for putting your S3 boards inside a case/enclosure. The FeatherS3 ships with the latest version of CircuitPython with ESP32-S3 support. It...

Introducing the TinyS3 - The Tiny Mighty ESP32-S3 development board in the TinyPICO format! Now with a u.FL connector instead of an onboard antenna, for the times when you want to connect an external antenna for longer radio range, or for putting your S3 boards inside a case/enclosure. TinyS3 is the latest in Unexpected Maker's super popular range of "Tiny"...

Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! This module contains an ESP8285, which is an ESP8266 processor with 1MB of FLASH memory already built in. You can use it just like an ESP8266, it's the same processor and WiFi The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi...

The ESP-BOX is a new generation AIoT development platform released by Espressif Systems. The ESP32-S3-BOX is an AIoT development board that is based on Espressif’s ESP32-S3 Wi-Fi + Bluetooth 5 (LE) SoC. The ESP32-S3-BOX provides a platform for developing the control of home appliances using Voice Assistance + touch screen controller, sensor, infrared...

Ever wanted to dabble in face and/or speech recognition? Espressif's ESP-EYE is a miniature ESP32-based development board that combines a digital microphone, ESP32 (of course) with 8 MB PSRAM and 4 MB flash, and a 2 megapixel camera. There's a few buttons and LEDs as well for basic control and configuration. Unlike some boards, this codebase does not require internet...

Introducing the ProS3 - The Ultimate Pro ESP32-S3 Development Board The ProS3 ships with the latest version of CircuitPython with ESP32-S3 support. It also ships with the UF2 bootloader, so you can easily update your ProS3 with the latest CircuitPython firmware, whenever you desire. Just plug your ProS3 into your computer and it will appear in your filesystem as a...

The Esquilo Air is everything you'll need to make any stand-alone internet enabled devices in a matter of minutes! This new generation of WiFi boards has a built in web-based IDE - that is, its on the board itself. Yet, its got the lightweight speed of an embedded Cortex M4 processor. This complete IoT development system comes equipped with 1MB of flash, 18 PWM...

The ESP32-S3-DevKitM-1 is an entry-level development board equipped with the ESP32-S3-MINI-1, a powerful, generic Wi-Fi + Bluetooth LE MCU module that features a rich set of peripherals, yet an optimized size. It's an ideal choice for a wide variety of application scenarios related to the Internet of Things (IoT), such as embedded systems, smart homes, wearable...

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This version is equipped with the ESP32-S3-WROOM-1 (PCB antenna) with 8MB Flash and 2 MB PSRAM. Please note: The S3 is similar to the ESP32-S2 - but adds a dual core and...

The ESP32-S2-Kaluga-1 kit is a full featured development kit by Espressif for the ESP32-S2 that comes with everything but the kitchen sink! From TFTs to touch panels, this dev board has it all. Espressif designed this kit to demonstrate the ESP32-S2’s human-computer interaction functionalities and provide the users with the tools for development of...

The Sony iS110B is a Wi-Fi Add-on board for SONY SPRESENSE. Low power consumption is realized by adopting Telit GS2200MIZ. Equipped with SPI (standard) and UART (optional) interfaces. In compliance with IEEE802.11b / g / n (2.4GHz), it supports Wi-Fi Direct and WPS as well as access point mode and station mode. This add-on board is already equipped with a chip...

Discontinued. Note - It is possible that this product may be put back on the site for sale. WiFi!? On an Arduino!? You shouldn't have! The MKR1010 from arduino.cc gives the functionality of the Arduino Zero with the added bonus of a WiFi chip. It's based on the low power Arm Cortex-M0 32-bit SAMD21, like in the other boards within the Arduino MKR family. The WiFi and...

Instead of being a single embedded functional module, Wio Terminal is more of a complete system equipped with Screen + Development Board + Input/Output Interface + Enclosure. Because it uses the SAMD51, it is compatible with Arduino and CircuitPython - using the same Arduino & CircuitPython core we have developed here at Adafruit! Wio Terminal is an...

Discontinued - you can grab ESP32-S2 Kaluga Dev Kit featuring ESP32-S2 WROVER instead! Espressif's ESP32-S2 Human Machine Interface Dev Kit 1 (ESP32-S2-HMI-DevKit-1) has been specifically designed for human-machine interfaces in smart-home automation controllers, smart speakers with display, smart alarm clocks, etc. ESP32-S2-HMI-DevKit-1 is powered by the...

Discontinued - you can grab this TinyPICO ESP32 Development Board with USB-C instead! The smallest, most feature-rich ESP32 dev board is here! TinyPICO has incredible processing power for a board that's shorter than an alkaline battery. Thanks to creator-maker Seon Rozenblum, you can tinker with a tiny, mighty, uncompromising board with 4MB extra RAM, on-board RGB...

With so many connectivity options, Pycom's LoPy4 is a lot like an amazing, multi-course brunch. You've got LoRa playing your favorite morning public access radio station, WiFi talking to your smart coffee maker, SigFox and cream cheese on a bagel, and a baker's dozen of Bluetooth muffins-- I mean, blueberry muffins! Boosted with the Espressif ESP32 chipset, the LoPy...

With LoRa, Wifi and Bluetooth® Low Energy, the Pycom LoPy is the only triple bearer MicroPython enabled microcontroller on the market today – the perfect enterprise grade IoT platform for your connected Things. With the latest Espressif ESP32 chipset the LoPy offers a perfect combination of power, friendliness and flexibility. Create and connect your things...

Pycom introduces the WiPy 3.0 – a tiny MicroPython enabled WiFi & Bluetooth® IoT development platform. With a 1KM WiFi range, state of the art Espressif ESP32 chipset and dual processor, the WiPy is all about taking the Internet of Things to the next level. Create and connect your things everywhere. Fast. Note: This board does not come assembled and...

The ESP-BOX is a new generation AIoT development platform released by Espressif Systems. The ESP32-S3-BOX is an AIoT development board that is based on Espressif’s ESP32-S3 Wi-Fi + Bluetooth 5 (LE) SoC. The ESP32-S3-BOX provides a platform for developing the control of home appliances using Voice Assistance + touch screen controller, sensor, infrared...

The WiPy is an enterprise grade IOT development platform
 that runs Python in real time with the perfect blend of power, speed, friendliness, and flexibility. Within a few minutes you can wirelessly connect to it and get a Python REPL command line. In addition to all the hardware specs, Pycom developed powerful and intuitive Python API to take advantage of every...