Cables / Audio & Video

One of the most common converter cables you'll want in your cable collection - this 32" long cable converts a standard 3.5mm stereo jack to pigtail wires. Ground ring is black, middle ring is white and tip is red. Cable is 32"/81cm long from end to end. Right-Angle 3.5mm Stereo Plug to Pigtail Cable (4:49)

This basic cable comes with two 3.5mm (1/8" headphone jack size) stereo connectors. It's fairly straight forward, you'll commonly need these to connect two audio devices together. Cable is 6 ft long.

This handy Panel Mount RCA Cable is perfect for component/composite video and audio and perfect for connecting our Raspberry Pi to RCA component/composite screens. This cable comes with two nice RCA connectors and has two 4-40 mounting screws 20mm apart. The cable is 264mm / 10.4" long.

Connect your DisplayPort and Mini DisplayPort sources and devices with this bi-directional cable! This cable has a standard sized DisplayPort (DP) connector on one end and a Mini DisplayPort (MDP) connector on the other. The cable is bi-directional, which means that you can use a DP source with a MDP monitor or a MDP source with a DP monitor. The conductors are made...

Seamlessly transmit high-quality stereo audio with this 3.5mm Male/Male Stereo Cable. Ideal for "passing the AUX cord," or connecting audio devices such as smartphones, tablets, MP3 players, car stereos, portable speakers or any other 3.5mm (otherwise known as "1/8 inch") outputs.

This 24-pin FFC / FPC Extender is very simple. It lets you connect two 24-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit) cables end-to-end and extend the length. For use with 0.3mm thick FPC cables. Note that pin 1 of one cable is connected to pin 24 of the other so you need to use a cable that has contacts on the same side (type A cable)...

What do you do when you want to tinker with GPU hardware, but you don't have a display on hand? This HDMI Dummy Plug is a small device that acts as a display emulator. Once it's plugged into the video output socket on your device or computer, the plug punks the operating system into detecting a connected display, and voilà! Now you have unimpeded access to...

This 40-pin FFC / FPC Extender is very simple. It lets you connect two 40-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit) cables end-to-end and extend the length. For use with 0.3mm thick FPC cables. Note that pin 1 of one cable is connected to pin 40 of the other so you need to use a cable that has contacts on the same side (type A cable)...

Make your next audio input/output project in a box with this handy Panel Mount Stereo Audio Extension Cable - 1/8" / 3.5mm. OK its quite a mouthful, but its pretty simple: that headphone or microphone jack you know and love? (OK everyone but you, Tim Cook!) Now you can attach it onto a box or panel with the socket-side of this cable, and plug in the plug part into...

What is this TRS bit? Turtle Rock Studios? Transmission Raman Spectroscopy? Not quite, more like Tip-Ring-Sleeve. This nifty, gold-plated connector is known by many names, phone plug, phone jack, headphone jack, jack plug, etc. Used to transmit stereo audio signals, these connectors are a mainstay in audio equipment, especially speakers and microphones. For audio,...

This 20-pin FFC / FPC Extender is very simple. It lets you connect two 20-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit) cables end-to-end and extend the length. For use with 0.3mm thick FPC cables. Note that pin 1 of one cable is connected to pin 20 of the other so you need to use a cable that has contacts on the same side (type A-A...

Do you have a display, television, projector or some other older device that isn't compatible with your HDMI devices? Here's an adapter that will allow you to convert HDMI from your modern computer or game system to NTSC/PAL, for older screens and devices that might not have an HDMI input. This mini HDMI to AV signal converter will convert HDMI video signal or audio...

Make your own custom DE-9 cable or DE-9 interface with ease, using this DE-9 Plug to Terminal Spring Block Adapter. You get a nice solid PCB with a DE-9 plug and one line of push-spring terminal blocks that you can use with stranded or solid core wire to quickly assemble your own wiring jigs. We recommend this adapter when you need a non-standard wiring setup or...

Make your own custom DE-9 cable or DE-9 interface with ease, using this DE-9 Socket to Terminal Spring Block Adapter. You get a nice solid PCB with a DE-9 socket and one line of push-terminal blocks. Just flick up the little levers and slide in your stranded or solid core wire to quickly assemble your own wiring jigs. No soldering required! Perfect for when you need...

If you need to add a panel-mount connection for telephone-interfacing projects but don't have the time or ability to cut a custom oval or square hole, this RJ-12 or RJ-11 Telephone Round Panel Mount Extension Cable is the easiest and fastest way to panel-ify your existing phone kit. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or metal...

This 30-pin FFC / FPC Extender is very simple. It lets you connect two 30-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit) cables end-to-end and extend the length. For use with 0.3mm thick FPC cables. Note that pin 1 of one cable is connected to pin 30 of the other so you need to use a cable that has contacts on the same side (type A-A...

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the RCA (Composite Video, Audio) Male Terminal Block. RCA is one of the most...

This 50-pin FFC / FPC Extender is very simple. It lets you connect two 50-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit) cables end-to-end and extend the length. For use with 0.3mm thick FPC cables. Note that pin 1 of one cable is connected to pin 50 of the other so you need to use a cable that has contacts on the same side (type A cable)...

If you need to add a panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this 3.5mm Stereo Round Panel Mount Cable is the easiest and fastest way to panel-ify your project. The adapter is about 30mm in diameter, so you can drill a hole in your wood, plastic, or metal with a common hole-saw or bit, no special shapes or filing...

Here's an easy solution for keeping your HDMI ports free from dust and other unsavory particulates. These squishy Silicone HDMI Dust Cover Inserts slip neatly into any computer or device with an HDMI socket, from the HDMI to USB-C Video Capture Adapter to the Raspberry Pi 3 B+. Comes in a pack of ten, so you're set even if you have a display or computer with a lot of...

This cable is easy to understand - you get a 3.5mm mono audio jack on one end, and two alligator clips on the other. It's also really easy to use, perfect for clipping onto a micro:bit or Circuit Playground! It's also good for use with AT (accessibility technology) buttons as they use 3.5mm mono cables for interconnection. Black wire connects to sleeve, white wire...

Do you have an an older VGA-output computer, game system, or other device, that you want to hook up to your fancy new HDMI monitor? This converter will take a VGA signal and convert it to every-day HDMI so it will work with your computer monitor, display, television, projector, etc. This high-definition video converter will convert analog stereo audio signal and...

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the RCA (Composite Video, Audio) Female Jack Terminal Block. RCA is one of the...

Here's one of the easiest capture solutions for getting HDMI data into your computer or Raspberry Pi, really any system with a USB port.. Use this capture device to convert a video signal from a camera (or another device) into a digital format your computer can recognize. Its trivially easy to use: connect one end to an HDMI output up to 1080p. Connect the other end...

Do you have a S-Video display, projector or monitor that is not compatible with your HDMI devices? Here's an adapter that will allow you to convert HDMI to S-Video, for older video devices that might not have an HDMI input. S-Video has better performance than plain "RCA" composite NTSC/PAL as it separates the color and light level, so if you have a device that can...

Here's one of the easiest capture solutions for bringing old school audio and video into your computer or Raspberry Pi, really any system with a USB port... Use this capture device to convert an analog NTSC or PAL video signal from an older device into a digital format your computer can recognize. It's trivially easy to use: connect and match up the audio and either...

Here is a gorgeous metal-covered audio cable straight from Blade Runner/cyberpunk heaven. And we have them in a couple different colors! They're a step up from plain rubber/ABS cables, with a sleek metal-wound cover. This cable comes with two 3.5mm (1/8" headphone jack size) stereo connectors. Fairly straight forward, you'll commonly need these to connect two audio...

One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block audio connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the 1/4" (6.35mm) Stereo Plug Terminal Block. It's a pretty common size and is...

This 60-pin FFC / FPC Extender is very simple. It lets you connect two 60-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit) cables end-to-end and extend the length. For use with 0.3mm thick FPC cables. Note that pin 1 of one cable is connected to pin 60 of the other so you need to use a cable that has contacts on the same side (type A-A...

This cable is easy to understand - you get a 3.5mm mono audio plug on one end, and two alligator clips on the other. It's also really easy to use, perfect for clipping onto a micro:bit or Circuit Playground! It's also good for use with AT (accessibility technology) buttons as they use 3.5mm mono cables for interconnection. Black wire connects to sleeve, white wire...

Here is a gorgeous metal-covered audio cable straight from Blade Runner/cyberpunk heaven. And we have them in a couple different colors! They're a step up from plain rubber/ABS cables, with a sleek metal-wound cover. This cable comes with two 3.5mm (1/8" headphone jack size) stereo connectors. Fairly straight forward, you'll commonly need these to connect two audio...

RCAs are some of our favorite plugs. Easy to use and easy to handle. They're one of those plugs that everyone has fond memory of using. Our favorite memory was when we accidentally plugged the composite video plug into one of the stereo jacks and our TV made a loud noise - classic! This three-pack of RCA plugs comes with everything you need to make your own RCA plug...

Here is a gorgeous metal-covered audio cable straight from Blade Runner/cyberpunk heaven. And we have them in a couple different colors! They're a step up from plain rubber/ABS cables, with a sleek metal-wound cover. This cable comes with two 3.5mm (1/8" headphone jack size) stereo connectors. Fairly straight forward, you'll commonly need these to connect two audio...

Here is a gorgeous metal-covered audio cable straight from Blade Runner/cyberpunk heaven. And we have them in a couple different colors! They're a step up from plain rubber/ABS cables, with a sleek metal-wound cover. This cable comes with two 3.5mm (1/8" headphone jack size) stereo connectors. Fairly straight forward, you'll commonly need these to connect two audio...

VGA cable, for connecting this VGA device to that VGA display. 1.5 meters long, two male DB-15 connector on either end with embedded ferrites VGA Cable - 1.5m long (10:41)

This cable comes with two nice gold-plated RCA connectors. Perfect for use with component/composite video and audio, such as the YBox kit, Propeller Quick-proto for Quickstart board, and of course a Raspberry Pi® ! Cable is 6 ft long and has 75 ohm impedance.

One of the most common converter cables you'll want in your cable collection - this 6 foot long cable converts a standard 3.5mm stereo jack to two color-coded mono RCA coaxial jacks. You'll want this to convert a 'headphone' or 'line out' jack to your TV or stereo audio in panel. Perfect for use with component/composite video and audio, such as the Raspberry Pi®...

This coupler is kind of like a really short RCA cable. We think its perfect for use with our NTSC/PAL displays since they already have a cable. So instead of a long cable from the display to something like the Raspberry Pi, just pop one of these in between!

This basic cable comes with two S-Video MiniDIN-4 connectors. It's fairly straight forward, you'll commonly need these to connect two S-Video devices together. Works great with the Uzebox kit when you want better quality than Composite. Cable is 6 ft long. S-Video Cable - 9 feet (1:07)

Do you have an older electronic device that isn't compatible with your HDMI equipment? Here's an adapter that will allow you to convert your older composite AV-output devices on modern TVs and monitors. Perfect for reviving or re-using your older pieces of equipment that might not have an HDMI output (like an old computer or game system). This plug-and-play adapter...

Discontinued - you can grab this HDMI Input to USB 2.0 Video Capture Adapter instead! Here's one of the easiest capture solutions for getting HDMI data into any system with a USB-C port. Use this capture device to convert a video signal from a camera (or another device) into a digital format your computer can recognize. It's trivially easy to use: connect one end to...

Discontinued - you can grab 3.5mm Stereo Male/Male Audio Cable - Silver Metal - 1 meter long instead! Here is a gorgeous metal-covered audio cable straight from Blade Runner/cyberpunk heaven. And we have them in a couple different colors! They're a step up from plain rubber/ABS cables, with a sleek metal-wound cover. This cable comes with two 3.5mm (1/8" headphone...