Prototyping / Wiring

75 flexible stranded core wires with stiff ends molded on in red, orange, yellow, green, blue, brown, black and white. These are a major improvement over the "box of bent wires" that are sometimes sold with breadboards, and faster than stripping your own solid core wires. Makes breadboarding super fast. Approximately 75 wires in a mix of colors. ~55 short wires 4.5"...

Perfect for bread-boarding, free wiring, etc. This box contains 6 spools of solid-core wire. The wire is easy to solder to and when bent it keeps its shape pretty well. We like to have a few spools of this stuff around which is why this set is quite nice! We suggest picking up wire strippers to match. Wire gauge is 22 AWG which we've found is the best all-around...

Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place. Compared to our Large alligator clip set, these...

Connect this to that without soldering using these handy alligator clip test leads. 20" cables with alligator clip on each end, color coded. You get 10 pieces in 5 colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place. Compared to our small alligator clip set, these...

Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easy to solder to. When bent it keeps its shape pretty well. We like to have a few spools of this stuff around. We suggest picking up wire strippers to match. Wire gauge is 22 AWG which we've found is the best all-around gauge, it works best with breadboards and perfboards but also fits in...

Imagine terminal blocks that are cut out of one solid piece of brass, designed to distribute power. Well, that's what we have here! These machined bus bars are for when you want to distribute power through a project, we think they are ideal for robots and LED pixel grids where you have tons of current and a lot of loose wiring to control Each bus has 7 holes bored...

Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easy to solder to. When bent it keeps its shape pretty well. We like to have a few spools of this stuff around. We suggest picking up wire strippers to match. Wire gauge is 22 AWG which we've found is the best all-around gauge, it works best with breadboards and perfboards but also fits in...

These are like the fancy electronics equivalent of the wire nuts electricians use to bind wires together. They are a lot easier to use as well! Each block connector has a metal block inside and five levers that snap open and close to bind stranded/solid-core wire. No screwdrivers required! They're super handy for free wiring and can handle up to 32A at 450V with UL...

Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easy to solder to. When bent it keeps its shape pretty well. We like to have a few spools of this stuff around. We suggest picking up wire strippers to match. Wire gauge is 22 AWG which we've found is the best all-around gauge, it works best with breadboards and perfboards but also fits in...

This stuff is called "wire-wrap wire" because it used to be used for wire-wrapping high-speed digital circuits on a special kind of contact board. It's pretty rare to see wire-wrapping in these days of low-cost PCB fabrication but the wire is still really handy for prototyping work. It's extremely thin (30 AWG!) so your wiring wont get bulky, and it is just stiff...

These are like the fancy electronics equivalent of the wire nuts electricians use to bind wires together. They are a lot easier to use as well! Each block connector has a metal block inside and three levers that snap open and close to bind stranded/solid-core wire. No screwdrivers required! They're super handy for free wiring and can handle up to 20A at 300V with UL...

You'll find these handy 2-pin 0.1" spacing pig-tails to be quite helpful when wiring up your project. The connector end snaps cleanly into 0.1" spaced header (and fits neatly side by side on 0.1" spacing as well). We think this would be especially useful when paired with our PWM driver breakout, to control 16 PWM LEDs that are wired, but there are probably a dozen...

These female-female premium jumper wires are handy for making wire harnesses or jumpering between headers on PCB's. They're 3" (75mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbow colors). They have 0.1" female header contacts on either end and fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a...

If you're looking to make a custom cable with any two of our USB or HDMI adapters, then you'll need to have these flex cables handy! Making custom cables has never been easier. Just grab one of these cables, then swap and switch any of the plug or socket adapters on each end using the flex cable clips. There are options a-plenty! This is the 10 cm (~4 inches)...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a straight HDMI plug. Ribbon cable and other adapter not included!...

For winding custom coils, or very fine-pitch rework, we always reach for magnet wire. Magnet wire is very very thin (0.1mm diameter!) copper wire with a very thin layer of insulation. It's used for a range of electronics, hacking and making applications. Commonly these are used for winding transformers, inductors, motor or solenoid coils, speakers, hard disk head...

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reuseable and do not require any crimping! This is a 3 to 3 wire block: there are three separate inputs and three separate outputs. They're color coded so easy to follow,...

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reusable and do not require any crimping! This is a 1 to 5 wire block: there is one separate input and five outputs. Great for basic power or signal fan-outs, you would...

These are the easiest way possible to connect two wires - no if's, and's, or butt's! Well, actually, these are often referred to as wire butts 'cause you 'butt' two wires together (hey we didn't come up with the name!) Butt seriously folks! OK, so despite the humor, these are really handy. If you want to quickly prototype some wiring, skip the soldering and use these...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a right angle (right bend) HDMI plug. Ribbon cable and other adapter...

If you're looking to make a custom cable with any two of our USB or HDMI adapters, then you'll need to have these flex cables handy! Making custom cables has never been easier. Just grab one of these cables, then swap and switch any of the plug or socket adapters on each end using the flex cable clips. There are options a-plenty! This is the 20 cm (~8 inches)...

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reuseable and do not require any crimping! This is a 2 to 6 wire block: there are two separate inputs and two sets of three outputs. They're color-coded so easy to follow;...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a right angle (L) Micro HDMI plug. Ribbon cable and other adapter...

If you're looking to make a custom cable with any two of our USB or HDMI adapters, then you'll need to have these flex cables handy! Making custom cables has never been easier. Just grab one of these cables, then swap and switch any of the plug or socket adapters on each end using the flex cable clips. There are options a-plenty! This is the 50 cm (~20 inches)...

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reusable and do not require any crimping! These are 1 to 1 wire blocks: there is one separate input and one output. Great for basic power or signal splicing. These...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a right angle (right bend) Micro HDMI plug. Ribbon cable and other...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a right angle (left bend) HDMI plug. Ribbon cable and other adapter...

Crimping's not just for 80s hair metal bands! When your project requires repeated insertion and removal with minimal strain, why not check out the reliable wire ferrule? A wire ferrule is a tinned sleeve that once crimped, neatly holds all the pesky, individual strands of a stranded wire, giving you consistently stable connections, especially with screw-type terminal...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a straight Mini HDMI plug. Ribbon cable and other adapter not...

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reuseable and do not require any crimping! This is a 5 to 5 wire block: there are five separate inputs and five separate outputs. They're color coded so easy to follow; the...

If you're looking to make a custom cable with any two of our USB or HDMI adapters, then you'll need to have these flex cables handy! Making custom cables has never been easier. Just grab one of these cables, then swap and switch any of the plug or socket adapters on each end using the flex cable clips. There are options a-plenty! This is the 30 cm (~12 inches)...

For bread-boarding with unusual non-header-friendly surfaces, these cables will be your best friends! No longer will you have long strands of alligator clips that are grabbing little wires. These compact jumper cables have a premium male header on one end, and a grippy mini alligator clip on the other. Grab onto your Flora, Circuit Playground, micro:bit, Gemma, or...

This is a box of ten 25ft spools of stranded-core wire. Stranded-core wire is best used for wiring jigs where there's bending or movement expected. It also works well with terminal blocks. It's not great for use with breadboards (without tinning). The wire is easy to solder to, and when bent it keeps its shape pretty well. We like to have a few spools of this stuff...

This is a box of six 25ft spools of stranded-core wire. Stranded-core wire is best used for wiring jigs where there's bending or movement expected. It also works well with terminal blocks. It's not great for use with breadboards (without tinning). The wire is easy to solder to, and when bent it keeps its shape pretty well. We like to have a few spools of this stuff...

This is a box of ten 25ft spools of solid-core wire. The wire is easy to solder to, and when bent it keeps its shape pretty well. We like to have a few spools of this stuff around which is why this set is quite nice! We suggest picking up some wire strippers to match. Wire gauge is 22 AWG, which we've found is the best all-around gauge, and it works best with...

This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with grippy mini alligator clips. We're carrying these to match up with any of our boards or breakouts with 3-pin 'STEMMA' connectors on them such as the HalloWing or NeoTrellis M4. This cable has a JST PH 3-pin on one side and alligator clips on the other, so it could be used to connect...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a right angle (right bend) Mini HDMI plug. Ribbon cable and other...

When working with unusual non-header-friendly surfaces, these handy cables will be your best friends! No longer will you have long, cumbersome strands of alligator clips. These compact jumper cables have a premium female header on one end and a grippy mini alligator clip on the other. Grab onto your Circuit Playground, micro:bit, CRICKIT, Gemma, or even a banana, and...

When working with unusual non-header-friendly surfaces, these handy cables will be your best friends! No longer will you have long, cumbersome strands of alligator clips. These compact jumper cables have a premium male header on one end and a grippy mini alligator clip on the other. Grab onto your Flora, Circuit Playground, micro:bit, Gemma, or even a banana, and...

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course they are reuse-able and do not require any crimping! This is a 3 to 9 wire block: there are three separate inputs, and three sets of three outputs. They're color coded so easy to...

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these all the time in breadboards, perfboards, and in terminal blocks. For wearables or projects where the wire-harness has to be able to deal with...

This is a cute half-size breadboard with an assortment of small jumper wires, great for prototyping. The breadboard is 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. Power rails can be pulled off easily to make the breadboard as thin as 1.4" (3.5cm). The jumper wires are pre-cut and bent in right angles at...

These are the easiest way possible to connect two wires - no if's, and's, or butt's! Well, actually, these are often referred to as wire butts 'cause you 'butt' two wires together (hey we didn't come up with the name!) Butt seriously, folks! OK, so despite the humor, these are really handy. If you want to quickly prototype some wiring, skip the soldering and use...

This cable will make it super easy to use our plug-and-play STEMMA QT boards with boards like Circuit Playground. On one end you get a Qwiic / STEMMA QT connector (technically known as a JST SH 4-pin plug) into 4 individual wires with grippy alligator clips. We're carrying these to match up with our boards or breakouts with 'STEMMA QT' connectors on them. This cable...

Nothing is going to be as thin and flexible as this wire - it feels a little like waxed thread but can carry current! You could use this in wearables or very fine assemblies where weight and bulk is at a premium. Silicone wires are flexible but aren't as thin. Wire-wrapping wire is thin but isn't flexible. The covering for the wire is Teflon so its good from -80 to...

Connect this to that without soldering using these mini alligator clip test leads. 15" cables with alligator clip on each end in six colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter, so we don't have to hold the probes in place, or with wearable projects, or for quick prototyping with big-pad circuit boards...

Connect this to that without soldering using these small alligator clip test leads. 18" long cables with color-coded alligator clips on both ends. You get 6 pieces in 6 unique colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place. Compared to our large alligator clip...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a straight HDMI socket. Ribbon cable and other adapter not included!...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft...

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these all the time in breadboards, perfboards, and in terminal blocks. For wearables or projects where the wire-harness has to be able to deal with...

This stuff is called "wire-wrap wire" because it used to be used for wire-wrapping high-speed digital circuits on a special kind of contact board. It's pretty rare to see wire-wrapping in these days of low-cost PCB fabrication, but the wire is still really handy for prototyping work. It's extremely thin (30 AWG!), so your wiring won't get bulky, and it is just stiff...

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reusable and do not require any crimping! And, if your project involves multiple block connectors, check out these Snap Action Connection Buckles to keep all your wiring...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft...

Testing is an important step in board manufacturing. And it can be super tricky on a fully populated PCB. So how can you test connections when you have an assortment of components blocking your probe? These "mini loop type" Small PCB Test Points easily snap in to your project, and they're ideal for ultra-low profile surface-mount testing! They will attach to J hooks,...

Nothing is going to be as thin and flexible as this wire - it feels a little like waxed thread but can carry current! You could use this in wearables or very fine assemblies where weight and bulk is at a premium. Silicone wires are flexible but aren't as thin. Wire-wrapping wire is thin but isn't flexible. The covering for the wire is Teflon so its good from -80 to...

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these all the time in breadboards, perfboards, and in terminal blocks. For wearables or projects where the wire-harness has to be able to deal with...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a straight Micro HDMI plug. Ribbon cable and other adapter not...

Nothing is going to be as thin and flexible as this wire - it feels a little like waxed thread but can carry current! You could use this in wearables or very fine assemblies where weight and bulk is at a premium. Silicone wires are flexible but aren't as thin. Wire-wrapping wire is thin but isn't flexible. The covering for the wire is Teflon so it's good from -80 to...

This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with grippy mini alligator clips. We're carrying these to match up with any of our boards or breakouts with 'STEMMA' connectors on them such as the HalloWing or NeoTrellis M4. Can also be used with any STEMMA breakouts! This cable has a JST PH 4-pin on one side and alligator clips on the...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a straight Micro HDMI socket. Ribbon cable and other adapter not...

Testing is an important step in board manufacturing. And it can be super tricky on a fully populated PCB. So how can you test connections when you have an assortment of components blocking your probe? These "mini loop type" Small PCB Test Points easily snap in to your project, and they're ideal for ultra-low profile surface-mount testing! They will attach to J hooks,...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a straight Mini HDMI socket. Ribbon cable and other adapter not...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a right angle (left bend) Mini HDMI plug. Ribbon cable and other...

This accessory makes wiring up sensors to your Bus Pirate 5 "a snap", with snap-open quick connects that plug into the BP5s header port. Sometimes you just need to connect some wires and dig into a project. Quick connector boards get you working right away. KF141 is a popular quick connector block with sturdy spring retention clamps. Press the lever, insert a...

Connect this to that without soldering using these quick terminal blocks. They allow connecting of two sets of four wires together using just a flat-head screwdriver. These are UL rated to carry up to 15 Amps, so they're great for high current LED strips! Can be used with wires from 14AWG to 22 AWG

Nothing is going to be as thin and flexible as this wire - it feels a little like waxed thread but can carry current! You could use this in wearables or very fine assemblies where weight and bulk is at a premium. Silicone wires are flexible but aren't as thin. Wire-wrapping wire is thin but isn't flexible. The covering for the wire is Teflon so it's good from -80 to...

Kiss those days of heat-shrink, melted jacketing and clumsily-arranged third-hand tools goodbye! Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 22-26 AWG solid core wire and slip them into the plastic splice so that they slide into the metal teeth. Then squeeze down with parallel-jaw or slip joint pliers - don't use...

Kiss those days of heat-shrink, melted jacketing and clumsily-arranged third-hand tools goodbye! Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 22-26 AWG solid core wire and slip them into the plastic splice so that they slide into the metal teeth. Then squeeze down with parallel-jaw or slip joint pliers - don't use...

Kiss those days of heat-shrink, melted jacketing and clumsily-arranged third-hand tools goodbye! Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 19-26 AWG solid core wire and slip them into the plastic splice so that they slide into the metal teeth. Then squeeze down with parallel-jaw or slip joint pliers - don't use...

If you are doing biomedical instrumentation or maybe RF work or just need to get signal from here to there, cleanly, you will love this cable! It's extremely thin and flexible coax, only 1.2mm in diameter, but has a standed inner core, plastic insulator and over-shielding. Normally you'd have to pick up a spool of 100 ft or more, but now you can get about 10 ft, just...

We have a couple of these handy Pomona Female 0.1" Socket to Banana Plug 24" cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 24" long Black version. We also carry this cable in red. This Female Socket to Banana Plug cable is terrific for prototyping or for use as a jumper on...

We have a couple of these handy Pomona Female 0.1" Socket to Banana Plug 24" cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 24" long Red version. We also carry this cable in black. This Female Socket to Banana Plug cable is terrific for prototyping or for use as a jumper on...

When alligator clips and even scope probes are too large, IC hooks come to the rescue! These fine clips are very nice, and come in a set of 9 colors (black, brown, red, orange, yellow, green, blue, violet, gray). They provide a nice strong grip on SOICs, TQFPs, anything with 0.6mm pin pitch or larger. The hook is made of strong gold-plated 'piano wire', and there are...

Designed by Making & Hacking extraordinaire Lee Cyborg, these colorful clips are a nice switch-up from the standard colors. Connect this to that without soldering using these Hot GitHub Summer alligator clip test leads that look perfect for a beachfront environmental-sensing project. 13" long cables with alligator clips on each end, color-coded. You get 10 pieces...

Testing is an important step in board manufacturing. And it can be super tricky on a fully populated PCB. So how can you test connections when you have an assortment of components blocking your probe? These "mini loop type" Small PCB Test Points easily snap in to your project, and they're ideal for ultra-low profile surface-mount testing! They will attach to J hooks,...

Discontinued - you can grab this Ultra-Fine Stranded Wire Spool - 10 meters - 32AWG - Black instead! Nothing is going to be as thin and flexible as this wire - it feels a little like waxed thread but can carry current! You could use this in wearables or very fine assemblies where weight and bulk is at a premium. Silicone wires are flexible but aren't as thin....

If you're looking to make a custom cable with any two of our USB or HDMI adapters, then you'll need to have these flex cables handy! Making custom cables has never been easier. Just grab one of these cables, then swap and switch any of the plug or socket adapters on each end using the flex cable clips. There are options a-plenty! This is the 100 cm (~40 inches)...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft...

Discontinued - you can grab this Hook-up Wire Spool Set - 22AWG Stranded-Core - 6 x 25ft instead! This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft...

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these all the time in breadboards, perfboards, and in terminal blocks. For wearables or projects where the wire-harness has to be able to deal with...

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these all the time in breadboards, perfboards, and in terminal blocks. For wearables or projects where the wire-harness has to be able to deal with...

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these all the time in breadboards, perfboards, and in terminal blocks. For wearables or projects where the wire-harness has to be able to deal with...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft...

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these all the time in breadboards, perfboards, and in terminal blocks. For wearables or projects where the wire-harness has to be able to deal with...

Discontinued - you can grab this Hook-up Wire Spool Set - 22AWG Stranded-Core - 6 x 25ft instead! This wire is super-flexible, soft, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfboards, and terminal blocks check out our solid-core wires. Comes with one 25ft...