3D printing / Printing Accessories

Brass Heat-Set Inserts for Plastic - M3 x 3mm - 50 pack

PRODUCT ID: 4256

Wanna improve the connection strength between your project's 3D-printed parts, and also have nice clean surfaces? Instead of gluing bits...

Wanna improve the connection strength between your project's 3D-printed parts, and also have nice clean surfaces? Instead of gluing bits together, or screwing plastic screws directly into your 3D prints, use strong and reusable machine screws and heat-set inserts. Heat set inserts are only a few cents a piece and have a grooved outside, with theads on the inside. Originally they were designed for injection molded parts but they work...

$5.95

1 IN STOCK

Brass Heat-Set Inserts for Plastic - M3 x 4mm - 50 pack

PRODUCT ID: 4255

Wanna improve the connection strength between your project's 3D-printed parts, and also have nice clean surfaces? Instead of gluing bits...

$5.95

1 IN STOCK

Heat-Set Insert For Soldering Irons - #4-40 / M3 Inserts - from Virtjoule

PRODUCT ID: 4239

Wanna improve the connection strength between your project's 3D-printed parts, and also have nice clean surfaces? Instead of gluing bits...

Wanna improve the connection strength between your project's 3D-printed parts, and also have nice clean surfaces? Instead of gluing bits together, or screwing plastic screws directly into your 3D prints, use strong and reusable machine screws and heat-set inserts. Heat set inserts are only a few cents a piece and have a grooved outside, with threads on the inside. Originally they were designed for injection molded parts but they work...

$9.95

63 IN STOCK

Heat-Set Insert For Soldering Irons - M5 Inserts - from Virtjoule

PRODUCT ID: 4249

Wanna improve the connection strength between your project's 3D-printed parts, and also have nice clean surfaces? Instead of gluing bits...

$9.95

27 IN STOCK

3D printing - Sticker!

PRODUCT ID: 649

You can 3D print! Adafruit offers a fun and exciting stickers to celebrate achievement for electronics, science and engineering. We believe everyone...

You can 3D print! Adafruit offers a fun and exciting stickers to celebrate achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a sticker is just one of the many ways to show and share. This is the "I learned how to 3D print" badge for use with educators, classrooms, workshops, Maker Faires, TechShops, Hackerspaces, Makerspaces and around the world to...

$1.50

26 IN STOCK

PRINTinZ Skin for Micro 3D Printer - 116mm x 116mm

PRODUCT ID: 3095

Looking to improve the printing bed on you Micro 3D printer? Check out the PRINTinZ Skin for M3D ! The PRINTinZ Skin is a peel and stick...

Looking to improve the printing bed on you Micro 3D printer? Check out the PRINTinZ Skin for M3D ! The PRINTinZ Skin is a peel and stick surface for 3D printer beds made from the same durable material as the outer layers of the Plate. It's the perfect option for those who prefer printing on a non-flexible printer bed. Printinz Skins can hold up to plenty of scraping and sanding and retain their adhesion properties indefinitely....

$7.50

3 IN STOCK

Othermill Precision Fixturing and Toe Clamp Set

PRODUCT ID: 3080

This Precision Fixturing and Toe Clamp Set turns your Othermill into a production tool! It ensures rigid and consistent work-holding without the...

This Precision Fixturing and Toe Clamp Set turns your Othermill into a production tool! It ensures rigid and consistent work-holding without the use of tape or glue. You can easily fixture and remove materials with a simple turn of the hex key. The aluminum-made tall alignment bracket is precision-machined and bolts directly into Othermill's T-slot bed. The toe clamps slide into the T-slots and are tightened with the hex keys to clamp...

$174.95

1 IN STOCK

PRINTinZ Flexible 3D Printer Plate for Printrbot - 168mm x 237mm

PRODUCT ID: 2233

Removing 3D printed parts from your 3D printer can be tough. Sometimes pieces get stuck to your 3D printing plate and their bottoms get stuck to...

Removing 3D printed parts from your 3D printer can be tough. Sometimes pieces get stuck to your 3D printing plate and their bottoms get stuck to your build plate. Over time, chiseling objects off can scratch and damage your plate - and get pretty annoying - so wouldn't it be great if you could just bend the plate to pop off your parts? Introducing the PRINTinZ Flexible 3D Printer Plate for Printrbot ! This Printer Plate...

MORE INFO

DISCONTINUED

3D printing - Skill badge, iron-on patch

PRODUCT ID: 490

You can 3D print! Adafruit offers a fun and exciting "badges" of achievement for electronics, science and engineering. We believe everyone...

You can 3D print! Adafruit offers a fun and exciting "badges" of achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a badge is just one of the many ways to show and share. This is the "I learned how to 3D print" badge for use with educators, classrooms, workshops, Maker Faires, TechShops, Hackerspaces, Makerspaces and around the world to reward...

MORE INFO

DISCONTINUED

AstroBox pack - Includes Raspberry Pi 2, Model B

PRODUCT ID: 2391

Slice, store, and print your 3D files from any web enabled device with the AstroBox pack ! AstroPrint is free, open source software for...

Slice, store, and print your 3D files from any web enabled device with the AstroBox pack ! AstroPrint is free, open source software for wirelessly managing 3D printers. It features a mobile friendly user interface that works across multiple devices and screen resolutions. This pack will have you wirelessly interfacing with your 3D printer in no time! The AstroBox makes 3D printing easier to manage, eliminating the need for...

MORE INFO

DISCONTINUED

Blue Masking Tape for 3D Printing Plates - 60 Yards

PRODUCT ID: 2416

OK yes, it's just masking tape. A big honkin' roll of I'm blue da-ba-dee-da-ba-die masking tape. Removing 3D printed parts can be tough....

OK yes, it's just masking tape. A big honkin' roll of I'm blue da-ba-dee-da-ba-die masking tape. Removing 3D printed parts can be tough. Sometimes pieces get stuck to your 3D printing plate and their bottoms get stuck to your build plate. Over time, chiseling objects off can scratch and damage your plate - and get pretty annoying - but with this tape you can coat your printer plate, print directly onto the tape, and then remove your...

MORE INFO

DISCONTINUED

LEO the Maker Prince - Journeys in 3D Printing by Carla Diana

PRODUCT ID: 1630

LEO the Maker Prince teaches children (both young and old) about 3D printing by following Carla and LEO's journey through Brooklyn. LEO is a...

LEO the Maker Prince teaches children (both young and old) about 3D printing by following Carla and LEO's journey through Brooklyn. LEO is a walking, talking robot who has the magical ability to to print (in plastic) any object that Carla draws. The other robots have their own special capabilities: H1-H0 prints in metal, Sinclair-10 can find and print objects from a huge catalog of designs, and the others (including AL1C3-D, IRIS-7, and...

MORE INFO

DISCONTINUED

Astroprint Vinyl Sticker!

PRODUCT ID: 2389

AstroPrint is free, open source software for wirelessly managing 3D printers. It features a mobile friendly user interface that works across...

AstroPrint is free, open source software for wirelessly managing 3D printers. It features a mobile friendly user interface that works across multiple devices and screen resolutions. This makes 3D printing easier to manage, eliminating the need for SD cards or manually controlling via USB. Astroprint also works in the cloud, so you can manage prints anywhere through a web browser! This is the " Powered by Astroprint "...

MORE INFO

DISCONTINUED

PRINTinZ Flexible 3D Printer Plate - 300mm x 300mm

PRODUCT ID: 2132

Removing 3D printed parts can be tough. Sometimes pieces get stuck to your 3D printing plate and their bottoms get stuck to your build plate....

Removing 3D printed parts can be tough. Sometimes pieces get stuck to your 3D printing plate and their bottoms get stuck to your build plate. Over time, chiseling objects off can scratch and damage your plate - and get pretty annoying - so wouldn't it be great if you could just bend the plate to pop off your parts? Introducing the PRINTinZ Printer Plate ! This Printer Plate is designed to fit on machine beds that are 300mm x...

MORE INFO

DISCONTINUED

The 3D Printing Handbook - by 3D Hubs

PRODUCT ID: 3754

3D Hubs has published what may be the bible for 3D printing. The 3D Printing Handbook is intended for all skill levels, and it's an...

3D Hubs has published what may be the bible for 3D printing. The 3D Printing Handbook is intended for all skill levels, and it's an essential book for makers wanting to dip their toes in the ever-growing pool of 3D printing design and application. The wealth of practical advice and guidelines come from first-hand experience from machine operators and industry experts. This tome is seriously chock-full of straightforward...

MORE INFO

DISCONTINUED

OctoPrint Parts Pack

PRODUCT ID: 2896

This OctoPrint parts pack is everything you need to start using OctoPrint software with your 3D printer! OctoPrint lets you connect to...

This OctoPrint parts pack is everything you need to start using OctoPrint software with your 3D printer! OctoPrint lets you connect to your printer through a device like a Raspberry Pi and control your print job with basic functions like starting, stopping, and pausing. It will also allow you to remotely move the print head along all axes or creat custom controls. Finally, with OctoPrint you'll also gain the...

MORE INFO

DISCONTINUED

PRINTinZ Skin for Flashforge - 152mm x 232mm

PRODUCT ID: 3097

Looking to improve the printing bed on your Flashforge Creator Pro? Check out the PRINTinZ Skin for Flashforge ! The PRINTinZ Skin is...

Looking to improve the printing bed on your Flashforge Creator Pro? Check out the PRINTinZ Skin for Flashforge ! The PRINTinZ Skin is a peel and stick surface for 3D printer beds made from the same durable material as the outer layers of the Plate. It's the perfect option for those who prefer printing on a non-flexible printer bed. Printinz Skins can hold up to plenty of scraping and sanding and retain their adhesion...

MORE INFO

DISCONTINUED

PRINTinZ Skin for Ultimaker - 229mm x 257mm

PRODUCT ID: 3098

Looking to improve the printing bed on your Ultimaker? Check out the PRINTinZ Skin for Ultimaker ! The PRINTinZ Skin is a peel and...

Looking to improve the printing bed on your Ultimaker? Check out the PRINTinZ Skin for Ultimaker ! The PRINTinZ Skin is a peel and stick surface for 3D printer beds made from the same durable material as the outer layers of the Plate. It's the perfect option for those who prefer printing on a non-flexible printer bed. Printinz Skins can hold up to plenty of scraping and sanding and retain their adhesion properties...

MORE INFO

DISCONTINUED