Kits & Projects / Enclosures

Store your project safe and sound in this nice weatherproof box with a clear top. We picked up this box because we like the machinable ABS plastic body and tough clear polycarbonate cover, the built in weatherproof gasket seal, and the easy-open screws that can be taken apart as many times as you wish without worrying about cracking or stripping. This box measures...

If you have a circuit board or a project you want enclosed, but need something extra durable, this extruded box is absolutely perfect. It's made from solid anodized aluminum so it's still lightweight while being durable, it's also easy to machine or drill. The end-plates come off and you could cut out a custom end plate from another material if you like. The inside...

If you have a circuit board or a project you want enclosed, but need something extra durable, this extruded box is absolutely perfect. It's made from solid anodized aluminum so it's still lightweight while being durable, it's also easy to machine or drill. The end-plates come off and you could cut out a custom end plate from another material if you like. The inside...

We've got nice cases for many of our beloved boards, but the Circuit Playground Express and Circuit Playground Bluefruit has been left out of couture enclosure game. Enter Ada-friend Mike Doell to the rescue! This minimal but elegant acrylic case will turn your board into an electronic snowflake. The enclosure is designed to snap together securely with no tools...

Whether you're raiding tombs or traversing nuclear fallout wastelands, this is the most heavy-duty enclosure for your project! Weatherproof? Check. Tough polycarbonate cover? Check. Built-in gasket seal? Oh yeah, check. Store your project safe and sound in this Flanged Weatherproof Enclosure. We especially like the machinable ABS plastic body, four mounting holes,...

Not merely a snow globe, but a show globe! This custom container is durable, clear and round, with a large flat screw-on top and a press-fit rubber stopper. The stopper makes a nice seal, and is also hollow which means you can put (you guessed it...) electronics inside! This makes it perfect for your own electronic-powered snow globe. The stopper inner diameter is...

This simple Smoke Snap-on Case is both good looking and tough enough to toss into your bookbag or toolbox. It has slim cut-outs for your cable, speaker, battery. It's darkened plastic but you can still easily see the LEDs shining through. The bottom section is open so you can plug it into a micro:bit accessory. This case is great if you want to protect your micro:bit...

PyPortal is our easy-to-use IoT device that allows you to create all the things for the “Internet of Things” in minutes. Create little pocket universes of joy that connect to something good. And now that you've made a cool internet-connected project with the Adafruit PyPortal, you will want to show it off. Instead of having it lie on a table or taped to a...

Here is the perfect kit for mounting convex lenses (glass or plastic) to your Monster M4sk! These acrylics has been laser-cut specifically for lenses with a lip-edge, so we can't guarantee it'll fit with any ol' convex lens. But it does work great with ours. And of course, the mounting hardware is included, so you can snap it right onto your M4SK. Takes less than...

So you've got a cool/witty name for your band, a Soundcloud account, a 3D-printed Daft Punk helmet... so what could be missing from your road to stardom? The NeoTrellis M4 Kit Pack, of course! The NeoTrellis M4 is an all-in-one USB + NeoPixel + Elastomer + Audio board. It's powered by our new favoritest-chip-in-the-world, the SAMD51, a Cortex M4 core running at 120...

Here is a chic minimalist enclosure for your CLUE board! This case has been laser-cut specifically to accommodate the TFT display, tactile buttons, and capacitive pads. And of course, we include mounting hardware so you can assemble it right onto your CLUE board. Takes less than five minutes to assemble, just find a nearby screwdriver. Please note: It won't work with...

You've got your PyGamer, and you're ready to start jammin' on your favorite arcade games. You gaze adoringly at the charming silkscreen designed by Ada-friend PaintYourDragon. The nostalgia is palpable! Cradling the PCB in your hands, you realize there's something missing. You feel an overwhelming need to protect this incredible gaming console. Prevent monsters,...

This simple but effective enclosure will fit any 'classic Arduino' shaped development board - we've tested it with the Arduino UNO R3, Adafruit Metro, and Adafruit Metro M4 Express. We rather like this case because it's low-profile enough that you can fit shields on top. There's even a flexi-nub for pressing the reset button! Best of all, it's LEGO brick compatible!...

Here is the perfect kit for mounting a convex lens (glass or plastic) to your HalloWing! This holder has been laser-cut specifically for lenses with a lip-edge, so we can't guarantee it'll fit with any ol' convex lens. But it does work great with ours. And of course, the mounting hardware is included so you can snap it right onto your HalloWing. Takes less than five...

What is this, an open boxcar for train traveling ants? It's actually a PCB-or-really-anything holder for all the makers and designers who use DIN railing in their builds. It's pretty simple, so not much to say about it. You have a DIN railing, you want to attach something to it? Maybe it fits in a 50mm x 80mm rectangle? This will do the job. Its easy to assemble in a...

Here is the perfect kit for your FunHouse, with a wall-mounting plate that can be attached onto the back of the 'House. This kit also includes a set of yellow bricks for customizing how you prop up your FunHouse. And of course, the mounting hardware is included, so you can assemble it with just a plain screwdriver. Takes less than 3 minutes! Includes: 1 x Laser cut...

A super-specifically-laser-cut enclosure that turns your 4x4 'Trellis into a handheld light/music maker! Perfect for your next cool interface, MIDI instrument, control panel... whatever could benefit from a glow-up with an elegant black and white enclosure and with beautiful diffused colorful buttons. Note: This is only the plastic enclosure and hardware! Looking for...

So you've got your Adafruit NeoTrellis M4, a cool/witty name for your band, a Soundcloud account, a 3D-printed Daft Punk helmet... so what could be missing from your road to stardom? The NeoTrellis M4 Enclosure, of course! A super-specifically laser-cut enclosure that turns your 'Trellis into a handheld light/music maker! Includes: 3 x Clear Acrylic Cutouts. 1 x...

A super-specifically-laser-cut enclosure that turns your 8x8 'Trellis into a handheld light/music maker! Perfect for your next cool interface, MIDI instrument, control panel... whatever could benefit from a glow-up with an elegant black and white enclosure and with beautiful diffused colorful buttons. Note: This is only the plastic enclosure and hardware! To complete...

Here is the perfect kit with two faceplate options for your MagTag, including a vivid Red Arrow plate and a dreamy white Cloud plate. And of course, the mounting hardware is included, so you can assemble it with just a plain Phillips screwdriver. Takes less than 3 minutes! Includes: 3 x Acrylic pieces (two front plate options, one back plate). 4 x M3 Black Nylon hex...

Store your project safe and sound in this nice weatherproof box with a clear top. We picked up this box because we like the machinable ABS plastic body and tough clear polycarbonate cover, the built in weatherproof gasket seal, and the easy-open screws that can be taken apart as many times as you wish without worrying about cracking or stripping.

Once you've picked up your MEMENTO Camera and you're ready to take it out into the world, here is a chic and minimalist enclosure that will look great on the runways of Paris or the street photography of New York City! These front and back plates have been designed to accommodate the TFT display, tactile buttons, and camera lens, and the front plate includes an RGBW...

We've upgraded our popular 4x4 Trellis Keypad kit with a super-specifically-laser-cut enclosure that turns your 4x4 'Trellis into a handheld Feather M4 Express-powered light/music maker! Perfect for your next cool interface, MIDI instrument, control panel... whatever could benefit from a glow-up with an elegant black and white enclosure and with beautiful diffused...

If you have a Pycom board, you probably want to stick it outside. How to do that safely? Behold the Universal IP67 Case! Pycom designed their own waterproof enclosure with thoughtful push-in tabs to perfectly fit accessory components, creating a water-tight seal. Need to affix your project in place? Not to worry! There are two holes that go straight through the case...

Big project! Big tin! You've got too much stuff to fit into a 'classic' Altoids-size tin, so you need an upgrade and here it is! This tin is about 3.5" by 5.5" so it's got plenty of space for an Arduino Uno or Mega, or Raspberry Pi, or Beagle Bone, or really any dev board you could think of. The tin is sturdy but easy to punch holes in or cut with tin snips. The...

Make your project stand up to serious abuse with an OtterBox, a true waterproof drybox that is also tough enough to get run over. Made of clear polycarbonate, you'll be able to keep an eye on any indicator LEDs. We have these in 3 sizes: small (#1000), medium (#2000) and large (#3000). They're ideal for projects with wireless components like GPS loggers, GPRS/GSM...

Make your project stand up to serious abuse with an otterbox, a true waterproof drybox that is also tough enough to get run over. Made of clear polycarbonate, you'll be able to keep an eye on any indicator LEDs. We have these in 3 sizes: small (#1000), medium (#2000) and large (#3000). They're ideal for projects with wireless components like GPS loggers, GPRS/GSM...

Make your project stand up to serious abuse with an otterbox, a true waterproof drybox that is also tough enough to get run over. Made of clear polycarbonate, you'll be able to keep an eye on any indicator LEDs. We have these in 3 sizes: small (#1000), medium (#2000) and large (#3000). They're ideal for projects with wireless components like GPS loggers, GPRS/GSM...

This simple Smoke Snap-on Case is both good looking and tough enough to toss into your bookbag or toolbox. It has slim cut-outs for your cable and battery. It's darkened plastic but you can still easily see the LEDs shining through. The bottom section is open so you can plug it into a micro:bit accessory. This case is great if you want to protect your micro:bit board...

Discontinued - you can grab Translucent Snap-on Case for micro:bit V2 instead! This simple Translucent Snap-on Case is both good looking and tough enough to toss into your bookbag or toolbox. It has slim cut-outs for your cable and battery. It's translucent plastic so you can still easily see the micro:bit PCB markings and LEDs shining through. The bottom section is...