‘Tis the season to sparkle and shine! Make your holidays glimmer with the light of beautiful LEDs. Whether you’re into RGB, all white, strips or individuals we’ve got the best blinky lights for everyone this holiday season!
Gifts from Adafruit
NeoPixels by Adafruit: We have so many varieties that we can’t pick a favorite. From our RGB LED Strips to our NeoPixel Rings to our NeoPixel Matrix you know we have stacks on stacks on stacks of these puppies ready to light up your life!
Adding colorful LEDs to your project used to require a lot of pins on your microcontroller and complex code. With the Adafruit NeoPixels, those problems are a thing of the past. You only need one pin on any microcontroller to run a long string of pixels, and with our open source NeoPixel library, you can get your NeoPixels up and running in seconds.
Adafruit NeoPixel Digital RGB LED Weatherproof Strip 60 LED -1m – WHITE
NeoPixel Ring – 24 x WS2812 5050 RGB LED with Integrated Drivers
Medium 16×32 RGB LED matrix panel: Bring a little bit of Times Square into your home with this 16 x 32 RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. They have 512 bright RGB LEDs arranged in a 16×32 grid on the front. On the back there is a PCB with two IDC connectors (one input, one output: in theory you can chain these together) and 12 16-bit latches that allow you to drive the display with a 1:8 scan rate. Read more.
12mm Diffused Thin Digital RGB LED Pixels (Strand of 25): RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a ‘dot’ of silicone. The dots are weatherproof and rugged. There are four flanges molded in so that you can ‘push’ them into a 12mm drill hole in any material up to 1.5mm/0.06″ thick. They’re typically used to make outdoor signs. We also have flat-backed pixels that are essentially the same, but are not as long and thin. Read more.
BlinkyTape by Blinkinlabs: BlinkyTape is a very special LED strip, taking the smarts of NeoPixels and combining it with an Arduino-compatible for an all-in-one ready to go design. You don’t have to source your own microcontroller, power supply or connectors. Simply plug in a standard USB battery pack or wall charger, and you’re good to blink. Read more.
Adafruit Trellis Monochrome Driver PCB for 4×4 Keypad & 3mm LEDs: Trellis is an open source backlight keypad driver system. It is easy to use, works with any 3mm LEDs and eight tiles can be tiled together on a shared I2C bus. This PCB is specially made to match the Adafruit 4×4 elastomer keypad. Each Trellis PCB has 4×4 pads and 4×4 matching spots for 3mm LEDs. The circuitry on-board handles the background key-presses and LED lighting for the 4×4 tile. However, it does not have any microcontroller or other ‘brains’ – an Arduino (or similar microcontroller) is required to control the Trellis to read the keypress data and let it know when to light up LEDs as desired. Read more.
Flora RGB Smart NeoPixel version 2 – Pack of 4: What’s a wearable project without LEDs? Our favorite part of the Flora platform is these tiny smart pixels. Designed specifically for wearables, these updated Flora NeoPixels have ultra-cool technology: these ultra-bright LEDs have a constant-current driver cooked right into the LED package! The pixels are chainable – so you only need 1 pin/wire to control as many LEDs as you like. They’re easy to sew, and the chainable design means no crossed threads. Read more.
Adafruit Bicolor LED Square Pixel Matrix with I2C Backpack: What’s better than a single LED? Lots of LEDs! A fun way to make a small colorful display is to use a 1.2″ Bi-color 8×8 LED Matrix . Matrices like these are ‘multiplexed’ – so to control all the 128 LEDs you need 24 pins. That’s a lot of pins, and there are driver chips like the MAX7219 that can help control a matrix for you but there’s a lot of wiring to set up and they take up a ton of space. Here at Adafruit we feel your pain! After all, wouldn’t it be awesome if you could control a matrix without tons of wiring? That’s where these adorable LED matrix backpacks come in. We have them in three flavors – a mini 8×8, 1.2″ Bi-color 8×8 and a 4-digit 0.56″ 7-segment. They work perfectly with the matrices we stock in the Adafruit shop and make adding a bright little display trivial. It’s called a Bicolor LED, but you can have 3 colors total by turning on the red and green LEDs, which creates yellow. That’s 3 colors for the price of 2! Read more.
Gifts From Other Sites!
Interactive LED Panel Kits from Evil Mad Scientist: Interactive LED panels are giant circuit boards filled superbright LEDs that respond in a complex, subtle, and gentle fashion to stimulus provided by human interaction. They can be used as interactive art on your wall, or tucked under glass to make your own Interactive LED Coffee Table. Read more.
BlinkM MaxM, the Ultrabright Smart LED from ThingM: BlinkM MaxM, the Ultrabright Smart LED is BlinkM’s bigger, crazy sibling. It’s an intensely bright smart LED for prototyping that comes as a package of 2 components: a control module (MaxM Master) and a daughter board with 3 ultrabright LEDs (MaxM Blaster). Makes virtually any RGB color and it’s 1000 times as bright as a standard LED. Read more.
Blinky Grid Kit from Wanye and Lane: Scroll messages and animations across an LED matrix, and reprogram it by holding it up to your screen. It has 56 LEDs in a 7×8 array, and can display text and animations in a variety of ways. It is a standalone kit. Read more.
Ultraviolet LED from spikenzielabs: This is a simple 5mm LED with an interesting array of applications. This ultraviolet LED can be used for counterfeit detection (bills, credit cards, documents, etc), sterilization, pesticide, black lights, sun burns, the list goes on. Please wear eye protection when using these LEDs. Read more.
Here are your 2013 shipping deadlines for ordering from Adafruit. Please review our shipping section if you have specific questions on how and where we ship worldwide for this holiday season.
UPS ground (USA orders): Place orders by Friday 11am ET – December 13, 2013 – There is no guarantee that UPS Ground packages will arrive in time for Christmas.
UPS 3-day (USA orders): Place orders by Thursday 11am ET – December 19, 2013 – Arrive on 12/24/2013.
UPS 2-day (USA orders): Place orders by Friday 11am ET – December 20, 2013 – Arrive on 12/24/2013.
UPS overnight (USA orders): Place orders by Monday 11am ET – December 23, 2013 – Arrive on 12/24/2013.
UPS International: Place orders by Monday 11am ET – December 16, 2013. Can take up extra time due to worldwide delays and customs. Should arrive by 12/24/2013 or sooner.
Please note: We do not offer Saturday service for UPS.
Wednesday, Dec. 25, 2013, Christmas, no UPS pickup or delivery service.
Wednesday, Jan. 1, 2014, New Year’s Day, no UPS pickup or delivery service.
United States Postal Service, First Class and Priority (USA orders): Place orders by Friday – December 13, 2013 – Arrive by 12/24/2012 or sooner.
USPS First class mail international (International orders): Place orders by Friday – November 22, 2013. Can take up to 30 days ore more with worldwide delays and customs. Should arrive by 12/24/2013 or sooner, but not a trackable service cannot be guaranteed to arrive by 12/24/13.
USPS Express mail international(International orders): Place orders by Friday – December 13, 2013. Can take up to 15 days or more with worldwide delays and customs. Should arrive by 12/24/2013 or sooner.
Gift Certificates are always available at any time.
When in doubt contact us!