The Faint’s new high-tech live tour features Adafruit neopixels! @thefaint #neopixels #wearablewednesday

NewImage

The creators project sat down with The Faint to talk about their new tour and they name dropped Adafruit!

Can you talk about the new show, and the programming you’ve done for it?

We’re certainly still in the middle of it. I’m using a few programs to create the content. We have lights that are programmed, many via MIDI, and that’s the way we’ve done it for ten years or so.

We’ve got a strand of video panels straight back and scattered around the stage, and thats what I’m just starting to create content for: the videos, that will show up on the screens. They’re triggered via MIDI at this point, and we’re using a variety of programs to make that all happen.

There’s this program called Isadora: we’ve been using it since the very first time we did projections back in 2000. The program was recommended to us by a friend, and it worked great, but didn’t have one thing we needed. We got ahold Mark, who writes the program, and he wrote a new section of the actor that we could use so the videos preloaded and would start instantly when they were hit with any note. It’s user-friendly like that; he’s helped us out every time we’ve run into an obstacle. There’s just so much you can do with video, lighting, and MIDI with that program, it’s amazing. Any time I have an idea, I seem to be able to write a program in Isadora that will do it.

Do you have a programming background?

Other than The Faint, no (laughs). This is all stuff that I’ve figured it out. The first time we got a Groovebox, I’d never touched anything like it. I started figuring it out, then we started running our show on an MPC. I guess I’m the kind of guy who decides to learn something he doesn’t know anything about. I always enjoy that stressful process—in the end it’s rewarding; I’ve figured something out. Once you start to understand the aspects of one programming language, the others start making more sense. I randomly dove into Isadora, bit by bit.

One other element of the show is this clear drum set I had made by C&C, and I installed LED lights in them that are all custom programmable through this Arduino board I built. It’s a little micro-controller, so I built a little Arduino controller.

This is my first Arduino project, using the first board I’ve bought. Basically, Adafruit sells these strips of NeoPixels with sixty LEDs per meter. They’re each individually programmable, and you have to write software in Arduino to get them up and running. I built a little box that powers them, and I can send the data and power through quarter-inch cables. I have quarter-inch jacks built into each of the drums, and so I can trigger the MIDI with drumsticks, or a sensor. As far as what the patterns do, it’s however many looks I program in the software. I’ve got some software writing to fix for sure, because I’m just guessing, and when it doesn’t work, guessing again.

Do you find any intersections between writing code and writing music?

They’re very different, but if I’m in the same process of writing a song or jamming out on things, I end up with parts in my head when I go out to eat. You hear little melodies and you think, ‘Oh, I should try that.’ Oddly enough, the same thing happens with writing code. If I’m in that mode, I’ll be out driving around, and my brain starts running functions to turn the turn signal on. You get sucked into both, and in that way it’s similar. But as far as actual thought processes go, it’s pretty different. I wouldn’t relate it other than that your mind gets locked into whatever creative mode when you’re doing it a lot.

Since 1998, your growth as a band has run parallel to the dawn of all this contemporary technology. The world has changed very drastically since. I’m wondering how you guys have responded to this brave new world, and where you see it going.

Technology has changed a bunch, which is good for us. Originally, we always had ideas for things that didn’t exist yet. Or, we’d find crappy versions of those ideas, implement them into our set, and by the end of the tour, find out about new programs that would have made things way easier. We’d been running the set on MPCs for years, and at some point I was like okay, if we switch over to a laptop it’s going to be a lot safer to go out and back it up. In a day, you could have your show ready for that night, and try out your software. An MPC is a solid machine, but if something does go wrong, it’s hard to find one that has the right amount of RAM, and all the outputs, plus they’re getting rarer and rarer…

We had to shift, like, ‘Let’s update into the modern world for our live show so we don’t get stuck too far behind.’ I think in general, we keep up on most things. I don’t feel like I’ve really embraced the social media part of technology, but everything else I feel like I’m in tune with, as far as computers and knowing what’s up are concerned.

Read more.

NewImage


Featured Adafruit Product!

NewImage

Adafruit NeoPixel Digital RGB LED Weatherproof Strip 60 LED -1m: You thought it couldn’t get better than our world-famous 32-LED-per-meter Digital LED strip but we will prove you wrong! You wanted twice the LEDs? We got it (well, its 1.875 times as many but that’s within a margin of error). You wanted thinner strips? Now only 12.5 mm wide, 10 mm if you remove the strip from the casing. You wanted less noticable strip color – this strip has white-colored flex PCB, which will be less visible against white-painted walls. This is the strip with white flex PCB, its identical to the black 60 LED/meter except it has a different color mask on the flex strip Read more.


Flora breadboard is Every Wednesday is Wearable Wednesday here at Adafruit! We’re bringing you the blinkiest, most fashionable, innovative, and useful wearables from around the web and in our own original projects featuring our wearable Arduino-compatible platform, FLORA. Be sure to post up your wearables projects in the forums or send us a link and you might be featured here on Wearable Wednesday!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.