Crazy futuristic robot has six legs but can also transform into a ball #robotics

Laughing Squid made this interesting post on a six-legged robot that can turn into a ball.

As you can see, the sphere sections are reinforced using some T-shaped aluminium brackets for supporting and holding the plastic (PC) sphere sections. This made a huge difference when it comes to rigidity. On MKI I struggled with the fact that the plastic sphere section was to flexible and I had to reinforce the edges with ribs. The problem was the ribs kept getting loose (the PC glue wouldn’t hold), so I had to do even more improvements. On MKII the ribs isn’t really needed, simply because of the aluminium brackets that is shaped to match the inner part of each sphere section perfectly. I did spend some hours in the workshop fine-tuning the bending tool to make the bracket fit.

The main challenge with MKI was that it wasn’t able to roll in a straight line of path, only in a curved direction. I believe the main reason was the constrained motion of the upper sphere sections. Having only one DOF (degree of freedom), or only one servo motor for each of the six upper sections made it very challenging. It might be possible to make a more complex linkage system that gave the upper sections a better motion when rolling. Not sure how though..

I therefore decided to use two servo motors on each of the six upper sections. Having 2 DOF would make it easier to control, so that the upper and lower sections move in a symmetric motion.

Read more.

NewImage

NewImage

NewImage

NewImage


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



1 Comment

  1. Wow, that’s really amazing that you can make something that complex with something simple!!!!

Sorry, the comment form is closed at this time.