Intrepid modder builds “Hackintosh” Mac Pro replica inside a real trashcan #hackintosh #apple

Pasted Image 1 15 14 1 48 PM 2

This is a heck of a case-mod project + hackintosh project, with double points for punning off the “computer in a trashcan” tease about the gorgeous new Mac Pros as well! Intrepid modder builds “Hackintosh” Mac Pro replica inside a real trashcan, via Ars Technica:

Jokes that Apple’s new Mac Pro looked a bit like a trash can began almost as soon as the computer was announced, but one person has taken the comparison to its logical extreme: he has built a “Hackintosh” out of standard PC components and stuffed all of them in a bathroom trashcan with more than a passing resemblance to the actual Mac Pro.

The images from the German DIY-er responsible for the project were posted to the TonyMacx86 forums earlier this month and dug up by 9to5Mac earlier today—TonyMacx86 is a popular resource for users who like to get OS X running on standard PC hardware. The build begins with a Gigabyte z78n Wi-Fi mini-ITX motherboard mounted to a couple of stands and a ribbon cable that allows the AMD Radeon HD 7750 graphics card to be mounted parallel to the main board. Additional stands hold the device’s two 2.5-inch drives (one SSD and one HDD, possibly in a Fusion Drive configuration). Fans mounted inside the case at the top and the bottom help with airflow. The whole computer is about 26cm high and 18cm in diameter, not far from the 25.1 cm height and 16.7 cm diameter of the actual Mac Pro.

It goes without saying that this machine’s performance will come nowhere near that of a fully decked-out Mac Pro. It uses a dual-core Haswell Core i3 chip instead of a four-, six-, eight-, or 12-core Ivy Bridge Xeon; it uses one standard gaming GPU instead of two FirePro workstation GPUs; it lacks the Mac Pro’s dual Ethernet ports and six Thunderbolt 2.0 ports; and it uses standard SATA storage and consumer DDR3 rather than the PCI express storage or 1866MHz ECC DDR3 of the Mac Pro. The DIY version has also got at least four fans spinning inside, rather than the single fan used in the real thing….

Read More.

Pasted Image 1 15 14 1 49 PM


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.