November 8, 2013 AT 7:53 am

HDMI 4 Pi – 10.1 Display 1280×800 IPS – VGA/NTSC/PAL/NTSC

1287 Lrg-1

HDMI 4 Pi – 10.1 Display 1280×800 IPS – VGA/NTSC/PAL/NTSC – Yes, this is a beautiful bright 10.1″ TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest, brightest, highest resolution display that would be good for embedded computing usage. The visible display measures 10″ diagonal and is a ‘raw’ display as is used in a tablet, ultra thin with some mounting tabs around the edge. We include a driver board with HDMI, VGA and Composite inputs. The display is very easy to use – simply connect the included 9VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports. Voila, a display!

1287Angle Lrg-1
There’s a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tried to auto-detect which input you have and switches to that one or you can ‘select’ from the menu which to display.

1287Board Lrg

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC/PAL output. It will not work with a device that only outputs DVI or SECAM.

1287Buttons Lrg

For use with a Raspberry Pi we suggest editing config.txt to set “hdmi_safe=1″ output for best results (otherwise, the Pi may not ‘recognize’ the HDMI display and revert to composite output)

1287Connector Lrg-1

For use with a BeagleBone black, we found it works when plugged in, no configuration required. You may need a mouse/keyboard to keep the Bone display from going into ‘sleep mode’

1287Kit Lrg

In stock and shipping now!

Related

No Comments

No comments yet.

Sorry, the comment form is closed at this time.