Tutorial: rePaper eInk Development Board @ The Adafruit Learning System. A lovely starting guide for all three of our eInk displays
including how to wire up to an Arduino Mega for graphical eInk drawing!
The rePaper development boards from Pervasive Displays come with a driver board that is powered from 3V and has level shifting on all the I/O pins so it can be used with 5V microcontrollers such as the Arduino. The PCB also has a lot of driver circuitry required to keep the display running smoothly such a temperature sensor, FLASH memory and ZIF socket. All signals are broken out to a 20 male socket header on the left. A 20 pin socket/socket cable is included to make wiring easier and there’s also some extra-long header so you can plug these wires into Arduino header or a breadboard.
The display is 2″ diagonal and 200 x 96 resolution true eInk graphical display. These are intended for use as small dynamic signage in grocery stores since a barcode displayed on it can be scanned by a laser barcode-reader. The display does not require any power to keep the image and will stay ‘on’ without any power connection for many days before slowly fading. Of course, its also daylight readable and is very high contrast. This makes it excellent for data-logging applications, outdoor displays, or any other ultra-low power usages
RePaper/PDI have provided a suite of example code for Arduino UNO/Leonardo and Mega, as well as a driver compatible with the Adafruit GFX Library. Now you can program this display with the same library as all our TFT LCD and LED matrix displays!
No comments yet.
Sorry, the comment form is closed at this time.