Vacuum Former by jonny #3dthursday

DSC01677 display large

Vacuum Former by jonny: Thing 35402:

This is a vacuum forming machine that you can print. Which allows you to make a mold of your 3d printed object. I hope you like this and make one, you’ll be able to pour chocolate in your mold or other things like urethane.

Instructions

Print-description
(1) “stand-holds plastic”-holder
(1) “shop-vac-mount”-attaches to hose
or
(1) “shop-vac-mount-53.5mm-outer”-attaches to hose
(1) “gasket”-lets all the holes in the stand to be used
(2) “plastic-holder”-holds the plastic
optional
(1) “plastic-cut-out”-template to cut the plastic
or
(1) “plastic-cut-out-less-plastic”-template to cut the plastic

The three main pieces are the “stand”, the “gasket”, and the “shop-vac-mount”. Those three pieces are glued together the “gasket” being in between, you can glue them with acetone and abs paste/glue or regular glue. The “shop-vac-mount” hole (inner diameter) is 59mm and fits securely for my shop vac I’m not sure if it will work for you, if you tell me the diameter of your shop vac hose I can made another stl if you want. There is a mounting piece on the “shop-vac-mount” that I just have a piece of wood in between that and the hose mount to mount it, you can drill a hole through it too and mount it. The next main piece is the “plastic-holder” you need to print two of them and use 4 screw (m3 screws do fit but you might have to drill out the hole some though) and 4 nuts to secure them. When you put the holders together the plastic will be clamped in between them and they will mirror each other so the bottom one will be upside down. Also wrap a rubber band around the posts on the “stand” so you have good suction. Then the “plastic-cut-out” is 1mm thick and is a reference piece to cut the plastic you will be using to make a mold (I used plastic plates) you need to cut one the inside of the line you draw around the piece for a good fit. When drawing the line you need to keep the pieces still so I use magnets, you might want to use tape or clips they should work too. Then the “plastic-cut-out-less-plastic” is the same thing as “plastic-cut-out” but with a 85mm hole in the center for saving plastic and money. Once you have this all done and are ready to make a mold you can use a lighter or a heat gun (both work but a heat gun is better) to make the plastic soft and partially melted. Then as fast as you can put the holders with the plastic on your piece on the stand and turn on the vacuum, then you have a mold.

The fun files are for cubify invent by the way that’s the modeler I use, it’s really easy to make things but it’s $50 on Cubify.com.

Read more.


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.