ASK AN EDUCATOR! “How do you teach STEM concepts to kindergartners and 1st/2nd graders?”

Chris asks:

What is the best way to begin introducing elementary students (K,1,2) to STEM concepts? Specifically the basics of electronics- how do you explain voltage/current or the operation or a basic LED lighting up?

What do you think about an approach that is based heavily on observation without emphasis on explaining why things happen?

I absolutely agree with using a primarily hands on approach. Especially because of their short attention spans, and honestly it isn’t much different for older :-). When working with concepts like voltage and current, I would find projects that illustrate the concepts and are simple enough for the kids to complete themselves. The end product should be something that both physically and visually displays the concepts, as it gives the kids a good sense of accomplishment and the desire to explore even more.

With regards to projects, I have dug up some links that offer some good avenues:

Squishy Circuits – the site has a ton of information regarding making conductive and insulate dough, which can be used in lieu of wires. They also have a Classroom Guide that illustrates its uses in school.

How to Make a Battery – a few years ago I put together a few videos with MonkeySee.com that show how to make batteries out of simple components. All of the projects are doable in your age bracket, although the film canister battery can be a bit tricky.

Super Teacher Worksheets – has a ton of curriculum for the elementary school level and their page on electricity seems pretty decent.

APS Physics – has a bunch of coloring books related to electricity……and who doesn’t like a coloring book?

I hope this has helped and good luck with your kids…..just try not to get too messy!

Don’t forget, everyone is invited to ask a question!

Click here!

“Ask an Educator” questions are answered by Adam Kemp, a high school teacher who has been teaching courses in Energy Systems, Systems Engineering, Robotics and Prototyping since 2005.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



2 Comments

  1. The teacher at my child’s school teaches electronics to third graders. He teaches how to make sounds with transistors and resistors.

    Teaching must be simple, quick and reward based to keep the attention of children which means having projects that yield quick results.

  2. K-2nd grade students are (in an educational psychology sense) making the transition from pre-operational to concrete operations. Activities should concentrate on recognizing and predicting patterns, creating rules from data, testing rules with examples, etc. Ya’ll should read about “Cognitive Acceleration,” an educational approach from the UK which stimulates the development of reasoning ability. See http://www.cognitiveacceleration.co.uk/ or the UNESCO review article http://www.ibe.unesco.org/fileadmin/user_upload/archive/publications/innodata/inno02.pdf

Sorry, the comment form is closed at this time.