The Anatomy of Coobro Labs

Coobro Labs

The picture above is the entirety of Coobro Labs.  Coobro Labs is run out of my 800 sq. ft. condo in Minneapolis, MN.  This is where we kit and ship the Coobro Geo, and work on future open source hardware kits.  The reason for sharing this with you is to hopefully encourage those of you out there who think you need a lot of room, and a lot of expensive equipment to start your own KitBiz.  Let me break down the things that we find useful, and things we couldn’t live without.

  1. An impulse sealer – This is a must have piece of equipment that we picked up brand new off of ebay for about $50.  This tool takes rolls of anti-static tubing (see item #2) and heat seals the ends to create bags on-the-fly.  You can buy impulse sealers with or without a built in cutter.  The cutter isn’t really necessary, as it is just as easy to cut the bags with a scissors.
  2. Rolls of anti-static tubing – These are 500 foot rolls of anti-static tubing picked up from uline.com.  The reason for buying the rolls of anti-static tubing versus simply buying pre-made bags is that you can adjust the size of the bag to whatever length you want, and they are cheap at $25-30 per roll.
  3. Laser printer – Below our workbench, we have a used Kyocera EP C170N laser printer that we picked up off of Craigslist for less than $50.  While it isn’t mandatory, laser printers are much more cost effective, and the ink won’t be affected by moisture.  We use the laser printer mainly to print out shipping labels.
  4. High quality soldering iron – Having a decent soldering iron is what I feel is the most important tool I own.  The difference between a quality soldering iron and a cheap hardware store model is huge.  I used to find soldering frustrating and stressful, now I find it enjoyable and relaxing.  We have an Aoyue model 2900 soldering iron, but Adafruit’s Hakko FX-888 is a great choice.
  5. Fume extractor – A fume extractor is one of my most recent additions, and I can’t believe it took me so long to get one.  There are a lot of toxins in solder, and breathing them in is very dangerous.  I used to simply solder in a well ventilated area, and hold my breath until the smoke cleared.  This is about as stupid as closing your eyes to avoid the arc flash while welding without a mask.  I own the Weller WSA350 model and it works really well.
  6. Hot air reflow station – Once I started to get into soldering surface mounted components, this is the first tool I bought.  Before I made my own reflow soldering oven, I used this tool to solder surface mounted components.  While you certainly can use a good soldering iron to solder surface mounted components, this tool will save you a lot of headache.  We have the Aoyue 852A++ model, which can be had for around $150.
  7. Reflow oven controller – We use the Rocket Scream Electronics Reflow Oven Controller ($40) Arduino shield.  We have done some testing with our reflow oven by simply cranking the oven temperature up until the solder reflows, then shutting the oven off and letting the board cool in the oven with the door closed.  This seems to work just as good as using a reflow oven controller that follows a specific reflow curve.
  8. Toaster oven – This is a toaster oven that we bought in a Woot-Off for about $30.  It is really nice because it has a ‘Stay On’ feature, and it’s a convection oven, so there are no hot spots.  If you don’t plan on working with surface mounted components, you don’t need to worry about the last three items.
  9. All-in-one printer – I have owned this HP PSC 1510 inkjet printer for a few years now and it has worked really well for me.  The important thing here is that it has a built in scanner.  You will need a scanner to be able to scan your signed purchase orders for component suppliers.  A scanner basically replaces a fax machine.
  10. Component storage – I have a nice collection of Sparkfun shipping boxes that I have saved and used for component storage.  Simply slap a label on the top or front of the box to remember what is inside.  These also work great for project boxes.  You can also see other items we have used for component storage such as mint tins.
  11. More component storage – When you are just starting out, this is really all you need.  We store all of the components needed to build up Coobro Geo kits in this small parts organizer from our local hardware store.  Through hole components, even in quantities of 1000+, take up very little room.  Eventually, as we release more kits, we will need to upgrade, but this system works well for the time being.
  12. Ikea hacked workbench – My workbench is really just a bunch of components I picked up from Ikea.  The shelving is just Ikea CD storage boxes stacked in between some Ikea birch shelves.  The CD storage boxes work great for tool, parts, wire, and other large component storage.

As you can see, there really isn’t a whole lot to Coobro Labs.  There are obviously some items missing from the picture, such as shipping supplies, but this really is the majority of the Coobro Labs kit making business.  If you have a great idea for an open source electronics kit that you think others would also be interested in, there really isn’t anything standing in your way.

For more inspiration, see how we designed and developed the Coobro Geo, read Ladyada’s other kitbiz tips, or join the kitbiz conversation on the Adafruit forums.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



9 Comments

  1. @ k scharf – have you seen/used the kit? it’s an ambient-style device, not a LCD screen 🙂 why add the cost and complexity? it’s open-source hardware though so feel free too! 🙂

  2. This is a great summary. I always like to compare my bench layout with others.

    Since I was just exploring impulse sealers last weekend I was wondering do you recommend 8″ or 12″? Also the anti-static tubing do you recommend 4 mil or 6 mil?

    Thanks,
    Lars

  3. @Lars Glad you liked my post. An 8″ impulse sealer is certainly big enough, especially for tube widths of 2 or 4 inches (what we use). We use 4-mil anti-static tubing and it is more than adequate.

  4. I like that shelf.
    Do you know the name of those CD boxes? I can’t find them at IKEA. Are they old?

  5. @Per – They are about 4 years old, and I couldn’t find them on Ikea’s website. They still offer the drawers that I show next to the toaster oven, and that is the same depth as the shelves. I am also sure you could find a similar replacement for the CD storage boxes somewhere in Ikea. Good luck and let us know if you find a similar solution.

  6. One more question. You are the third person in a short time who mentioned converting a toaster oven to an reflow oven – what is the brand/model of your oven? It is much easier for me to get something that is proven to be good than doing the research myself (even though that is usually a lot of fun 🙂

  7. I will have to get back to you on the model of our toaster oven. Really any toaster oven with mechanical controls will work (look for knobs and dials, not LCDs and buttons). Also make sure to get one that can get hot enough (450F), and is powerful enough to hit that temp quickly. Our model is a bit slow to get to reflow temp, but works.

  8. thats a cool article very informative and thanks for the link to the arduino flow controller. I’m going to have fun with that!

  9. I think I found the toaster oven: Euro-Pro Convection Oven TO36

Sorry, the comment form is closed at this time.