Adidas Megalizer – Xbee shoes :)

Created by Didier Brun and Sid Lee for Adidas to help them promote the release of their sneaker collection MEGA, the team created a system that would allow dancers to create their own beat or music with their shoes. Although somewhat similar to Nike project by W+K and rhizomatiks, the Sid Lee team have seem to taken the concept a little further making a device like element allowing anyone to pick it up and have a play. The team also built an interactive installation in several Shops in France to allow others to play with the Megalizer.

The system is wireless, placed on each shoe (no cable running on the dancer’s leg, or belt case), efficient at a 6-7 meter range from the speakers. It includes very low latency (max 30ms), handling up to 6 shoes simultaneously. There are two force sensors for each shoe (one for the heel and one for the toe), and a wireless transmitter per shoe to capture the pressure applied on each of the sensors. The first transmitter prototype built was using a BlueTooth chip (class 3). Although the result was satisfactory at half-a-meter distance from the receiver, the latency increased with the distance. At 7 meters, the latency went as much as 1/8th second. Instead a XBee technology was used: with a low power consumption reaching minimum latency at a decent distance.

Each shoe includes A 6-pin dock to connect the sensors and charge the battery, a status LED, switch, 110 mah liPo battery, voltage regulator, XBee chip and a few resistors.
The software includes a server processing the receivers’ inputs (Processing) and an AIR application that interprets the signals, chooses and play the sounds. UI in the flash application is using Keith Petters Minimal Components.

Read more


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



1 Comment

  1. where can i find these shoes please!!!

Sorry, the comment form is closed at this time.