In-line wire 1-to-4 splitter

Product ID: 402
$1.95
Qty Discount
1-9 $1.95
10-99 $1.76
100+ $1.56

Description

If you want to connect multiple EL wires/strips/panels up to one inverter, these splitters are quite useful. There is one male connector (goes to the inverter) and then 4 female connectors (which will connect to each wire/strip/panel. You can even cascade them! Only thing to watch for is make sure that the total length of EL does not exceed what the inverter can drive!

These are for EL only! EL is 'AC' powered so there is no 'polarity' on the wires - the polarity of the pins may not line up right if you're using with anything other than EL. The wires may be 'swapped' on the 4 ends - so be super-aware of that.

Technical Details

Using EL wire is a little tricky but luckily we wrote a detailed step-by-step tutorial!

RoHS 2 2011 65 EU Compliant
RoHS 2 2015 863 EU Compliant

Learn

Turn an old laptop bag into geek-chic
Run a workshop with EL wire, tape, & panel!
Make your design glow
Xmas with a glow!
See All Guides