5V 2A (2000mA) switching power supply - UL Listed

Product ID: 276
$7.95
Qty Discount
1-9 $7.95
10-99 $7.16
100+ $6.36

Description

This is an FCC/CE certified and UL listed power supply. Need a lot of 5V power? This switching supply gives a clean regulated 5V output at up to 2000mA. 110 or 240 input, so it works in any country. The plugs are "US 2-prong" style so you may need a plug adapter, but you can pick one up at any hardware store for $1 or so.

This cable terminates with a 'standard' 5.5mm OD, 2.1mm ID positive tip connector and matches with our 2.1mm extension cord, female terminal block adapter, breadboard-friendly DC jack, etc.

This adapter is great for use with RGB LED pixels, Neopixels, or addressable LED strips, etc. It's not good for powering an Arduino thru the DC jack as it requires at least 7.5V - check out our 9V adapter instead!

This particular adapter is very nice, much better than the 'PSP charger' we got before, with better stability and less drooping at high currents. We even splurged to get a high-quality supply that is FCC/CE certified and UL listed!

Some customers have asked us why the label seems to say ".2A" instead of "2A" - there is a comma in front of the 2 that looks like a dot! It is really a 2A supply.

Technical Details

  • 47mm x 33mm x 33mm (1.9in x 1.3in x 1.3in)
  • Cable Length: 1.83/72in (5')
  • Cable Diameter: 3.5mm (0.125in)
  • Plug type: 5.5mm OD / 2.1mm ID 'coaxial' DC plug
  • Input: 110V-220V AC
  • Output: ~5V DC up to 2A
RoHS 2 2011 65 EU Compliant

Learn

Use a BeagleBone Black and Python to set the position of a servo
A small CRICKIT based hopping robot you can build 3 ways
Use a USB WiFi adapter to get your BeagleBone Black on the Internet!
Remotely control a Crickit and micro:bit robot with a second micro:bit!
See All Guides