eeprom xoxbox v 1.5

by **tseu** » Sun Jan 20, 2013 3:09 pm

Hello , i have a problem with my xoxbox . I bought my xoxbox on internet , she is an opportunity. I can't save my patterns and a friend said to me that it was perhaps the "eeprom" which was absent in the machine. The place where the eeprom should be is empty but there is another flea . I dont know what it is . Have to I buy one others eeprom ? Or others things to do ?
Thank you for your help and verry sorry for my english !

by **darffader** » Sun Jan 20, 2013 4:27 pm

can you post a picture of the pcb? (insides of the x0x)

by **tseu** » Sun Jan 20, 2013 4:46 pm

http://hpics.li/2788e5c

by **MMM** » Mon Jan 21, 2013 2:46 am

The chip is there; it's the small SMD chip next to the empty position.

by **tseu** » Mon Jan 21, 2013 4:38 am

ok , but if i have a cheap . What's the problem ? I can't save my patterns and i don't know why . Do you have have any ideas for change this problem ?
Thank you

by **antto** » Mon Jan 21, 2013 7:01 am

i think you have to press DONE at the last step of the pattern to save it to the eeprom

by **tseu** » Wed Jan 23, 2013 3:45 am

I'have already make this manipulation but when i change my module my patterns are erased . I dont' know what ?

by **MMM** » Wed Jan 23, 2013 4:26 am

There's the possibility that the chip is defective.

Where are you located?

by **tseu** » Wed Jan 23, 2013 5:30 pm

I'm from France , i live in Cannes .

by **MMM** » Wed Jan 23, 2013 5:50 pm

If you'd be willing to send the xoxbox to Germany I could fix it. If the EEprom is defective I would instead install the standard DIP EEprom.

I've been doing part of the service work for Mode Machines since last year and have fixed about 60 to 70 xoxboxes.

eeprom xoxbox v 1.5

eeprom xoxbox v 1.5

Re: eeprom xoxbox v 1.5

Re: eeprom xoxbox v 1.5

Re: eeprom xoxbox v 1.5

Re: eeprom xoxbox v 1.5

Re: eeprom xoxbox v 1.5

Re: eeprom xoxbox v 1.5

Re: eeprom xoxbox v 1.5

Re: eeprom xoxbox v 1.5

Re: eeprom xoxbox v 1.5

Who is online