Mike banned wrote:
Same problem here
In Midi Play mode, Logic (sequencer) sends Note ON/OFF midi and Xoxbox plays it well. But it does not send dinsync to TR606.
If I use "Pattern/Track MIDI Sync", Xoxbox sends Dinsync Clock to TR606, but does not play my sequence from Logic.
In midi-play-mode the x0xb0x-sequencer is switched off. It just reacts to midi-note-on/off-commands.
Therefore it does not create dinsync-commands from incoming midi-timecode.
I think it would be possible to program the x0x that it would work like you want it, but as we all know the x0xb0x-memory is too small for all the bells and whistles that everyone would like to have.
But it's open source: You can remove some unwanted functions for example from the song-mode and use the free bytes to implement your beloved functions.
Forum-User Mario did this some month ago with his MarOS.
Or wait for the bigger EEPROM and put it on the wishlist for a new OS.
1. Use the "Pattern/Track MIDI Sync"-mode, so you have the real sequencer-hardware-fun and din-sync works!
If you program the pattern in your DAW you could also use a software clone...
2. Use the midi-through on the x0x and a Novation drumstation to create din-sync-signals for the 606 (or another special adapter for that) .
my 2 cents!