Bob Jones wrote:I just received the USB Microscope (ID 636 Microview 5mp) I purchased from you. The software will not connect to the microscope. I went to your webpage and downloaded the software and driver located there (http://www.adafruit.com/products/636) but it still reports: “No Device detected, please connect your Magnifier directly to your PC USB port”. I’ve tried connecting to all the USB ports on the system (both USB 2.0 and 3.0). The LEDs on the microscope work and the system device manager does see the microscope and lists it as “Vimicro USB 2.0 PC Camera” so the driver is connecting and at least recognizing an attached device. I’m running Windows 7 on a Lenovo W510 laptop. Can you help me get this working?
Bob Jones wrote:I still have not been able to get this working.
Product ID: 0x3420
Vendor ID: 0x0ac8 (Z-Star Microelectronics Corporation)
Speed: Up to 480 Mb/sec
Manufacturer: Vimicro Corp.
Location ID: 0xfd141000 / 8
Current Available (mA): 500
Current Required (mA): 128
Users browsing this forum: No registered users and 2 guests