Dance Dance Revolution with Raspberry Pi B+ #piday #raspberrypi @Raspberry_Pi

NewImage

We’re big DDR fans here at Adafruit so we loved this project that Cabe Atwell posted in the element 14 community.

Raspberry Pi Model B+ pops up, and I was surprised to see more USB ports. Adding more peripherals without a secondary USB hub is inspiring. So, I thought about what I could do with more USB ports.

External harddrive, CD drive, Floppy drive? Kind of boring.

How about a bunch of arcade controllers? Word!

Backgound

I remember my local arcade used to give free tokens to those who received A and Bs on their report cards. Most of the time it didn’t matter for me. I would go into the arcade with one or two quarters, and shut the place down in the various Street Fighter games. The arcade closed down, and I wanted the exact same experience at home.

With Street Fighter, I found that the Sega Saturn had the best and closest experience to the arcade. So, I built an arcade controller for the Saturn. I measured the placement of the buttons prior to the arcade shut down. So, I was able to lay out regulation controls. I sourced real arcade parts from a now defunct company. It was fun. You may not think this, but arcade controllers are loud. All the switches are super sound in a quiet room. Arcades are full of constant noise, so, you never hear it!

My girlfriend was really into the Dance Dance Revolution, arcade dancing games. So, I built a “arcade quality” dance pad. I wanted something made of metal, heavy, and the exact size. All store bought dance pads were soft, moved around too much, or not the correct size. So, I built a dance pad for the Playstation 1 (aka PS1 or PSX).

About a year later, I was off to college, and these both went into storage, where they remained… until now!

Time for a Raspberry Pi Arcade!

Read more.


998Each Friday is PiDay here at Adafruit! Be sure to check out our posts, tutorials and new Raspberry Pi related products. Adafruit has the largest and best selection of Raspberry Pi accessories and all the code & tutorials to get you up and running in no time!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.