littleBits Projects: Cloud-Controlled Christmas Tree

large_IMG_8220LR

Add some purple, lose the green, but keep the white. Text a color to your tree to change the ambience. This project uses the cloudBit, IFTTT, the IR transmitter, and 3 AC switches to control 3 different colored strings of lights.

How it works:

Using IFTTT’s SMS and littleBits channels, you can create recipes that output different voltage levels in response to tagged text messages. The channels on the IR transmitter are controlled by voltage so when you send a certain voltage percentage through the cloudBit, you activate a corresponding AC Switch and string of lights.

The IR transmitter and the AC Switch communicate through infrared light [IR] which is invisible to the human eye. The sensor on the AC switch reads the incoming IR signal and toggles any device that is plugged into it on or off.

Check out our Tips & Tricks to learn about how the IR transmitter channels work with the AC Switch.

Instructions:

1. Set up your cloudBit if you haven’t done so already. Instructions for setting up the cloudBit can be found here.

2. Connect your circuit: USB power + cloudBit + IR transmitter. We held our circuit together with a littleBits mounting board.large_Picture_25Click here for the circuit diagram.

3. Now you will need to set up the AC Switch and pair it with the IR transmitter. Check out our  Tips & Tricks to learn how to do this.large_Picture_26 For our tree, we used 3 AC Switches [on 3 different IR transmitter channels) to control 3 different colored light strings.

4. Test to make sure the circuit is working correctly. In  Cloud Control on the “send” tab, you should be able to control the three channels on the IR transmitter using the slider on your phone. Press the button and all the lights should turn on and off simultaneously.

5. Create an account on IFTTT.com and activate the littleBits channel.

6. Set up a few “tagged text message” recipes using IFTTT’s SMS channel so that you can control the color of your tree with your phone. See our IFTTT recipe examples above.
large_Picture_27-1
Note: IFTTT may take a few minutes to process your request. Be patient :).

7. Host a holiday party and show off your new tricks!

large_IMG_8217LR

 


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.