3D Materials Spotlight: Taulman 3D hacks t-glase to look more like glass #3DPrinting #3DThursday

Pasted Image 12 10 14 9 08 PM

Taulman 3D hacks t-glase to look more like glass:

…Having a background in large scale optics, we wanted to make sure that if there was a development for FFF printing of transparent parts, that t-glase would play a part as the base polymer.  During the development we made a decision to enhance the clarity of t-glase with a very slight trade off in the Tg in the final chemical formulation.  This has initially allowed some sites and designers to design jewelry components using a thicker layer during the printing process to give the part more of a glass like appearance.

It should be noted, that t-glase is a high strength PET polymer and prints with standard setting used for PLA but with a print temp of about 235C.  All of the cooling profiles and techniques used for PLA apply to tglase.  Large industrial users like AOSmith and others as well as hundreds of machine shops use t-glase for it’s non delaminating feature when printing large parts.  However to gain an increase in transparently of the final part for esthetics, one needs to increase layer size and in doing so would need to slow the printer down based on the increased material flow.

…A company that specializes in 2 part artistic and industrial epoxies, “Smooth-On” released a product called “XTC-3D” for coating 3D Printed parts a few weeks ago.  We purchased the product and again performed some quick tests to determine if the product would fill the need to convert a cup from a cylinder of threads, to a clear glass.  The photos below show the results.  We are now suggesting the product to our users that need additional clarity in their printed parts….

Read More.

Pasted Image 12 10 14 9 13 PM

Pasted Image 12 10 14 9 13 PM

Pasted Image 12 10 14 9 14 PM

Pasted Image 12 10 14 9 14 PM


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.