RPI with OLED screen launched in the stratosphere! #piday #raspberrypi @Raspberry_Pi

Fabrice Faure shared this with us: an RPI with OLED screen launched into the stratosphere!

Thanks to Adafruit Prototyping Pi Plate Kit , I’ve setup a payload with RPI, OLED screen, OneWire temp sensor, GPS breakout and radio modules that
recorded picture and movies from the stratosphere with a OLED screen still
running fine at -50 degrees.

I’ve successfully recovered my HAB payload last week! The payload was
integrating a RPI with OLED screen, I’ve created a blog describing the
project (and linking to adafruit for the hardware) here.

I’ve also shared a youtube video of the flight with the OLED screen (with
reference to adafruit for the prototyping plate): [ABOVE]

Thank you again for your great products that made this project comes true!

And from the project page:

…Since a couple of years, I was thinking about launching a high altitude balloon to the stratosphere. Taking my own pictures of blue atmosphere next to the blackness of space was a dream for me.

…I tried to include new experiments in the payload: testing the robustness of a display in stratospheric environment and taking full frame pictures/video in parallel with one RPI camera module.
The screen should handle extreme temperatures (-50 degrees C), deliver very high brightness images with low flickering. I have tested several OLED screen, selected the ILSOFT Oled model, then tuned the driver (sources available here) to increase the brightness and refresh rate by dividing the display height by 8 and optimising other parameters: the goal was to avoid flickering because of the camera shutter speed.

…The Rasperry PI will display the flight status on this screen (altitude, external temperature, …) while the RPI camera will be recording. The temperature and brightness requirements with ILSOFT OLED have been successfully validated during the stratospheric flight! ….

Read More.

Pasted Image 11 30 14 10 00 PM

Pasted Image 11 30 14 9 56 PM

Pasted Image 11 30 14 10 01 PM


998Each Friday is PiDay here at Adafruit! Be sure to check out our posts, tutorials and new Raspberry Pi related products. Adafruit has the largest and best selection of Raspberry Pi accessories and all the code & tutorials to get you up and running in no time!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.