Architect Jenny Wu – LACE: 3D Printed Rings and Necklaces #3DxJewelry #3DxDesign #3DThursday #3DPrinting

Pasted Image 11 25 14 9 13 PM

Architect Jenny Wu – LACE: 3D Printed Rings and Necklaces.

…LACE is a line of 3D printed wearable designs by Jenny Wu, a partner in the architecture office, Oyler Wu Collaborative. The intricately detailed design pieces extend from Jenny’s avant-garde architectural work, merging her modern design sensibilities with the latest in 3-D printing technology and material.  The design of the pieces, ranging from necklaces to rings, uses complex, interlocking elements to create a bold statement around the body, whether it is the neck or the finger.

Jenny Wu is the founder and design director of LACE.  She is also a partner at the Los Angeles based architecture and design office, Oyler Wu Collaborative, which she started in 2004 with Dwayne Oyler. The office has been published globally and is recognized for its experimentation in design and fabrication. Their work straddles between two scales — small scale, experimental installations and large scale iconic building projects in Asia and US.  The office has won numerous design awards, including the 2013 Design Vanguard Award from Architectural Record, 2013 Emerging Talent Award from AIA California Council, 2012 Presidential Honor Award for Emerging Practice from AIA LA, Taiwan’s ADA Award for Emerging Architect, and 2011 Emerging Voices Award from the Architectural League in New York. They published the book, Pendulum Plane, in 2009, and are working on their latest publication, Trilogy, which will be out in the Fall of 2014. Jenny is currently a member of the design faculty at Sci-Arc (Southern California Institue of Architecture)….

Read More.

Pasted Image 11 25 14 9 14 PM

Pasted Image 11 25 14 9 14 PM

Pasted Image 11 25 14 9 15 PM

Pasted Image 11 25 14 9 18 PM

All images copyright LACE by Jenny Wu. All rights reserved.


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! We also offer the LulzBot TAZ – Open source 3D Printer and the Printrbot Simple Metal 3D Printer in our store. If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.