8,000 glowing balloons recreate the Berlin Wall #ArtTuesday

NewImage

Wired posted about this project a week ago on the anniversary of the fall of the Berlin Wall.

The first blows to bring down the Berlin Wall were struck nearly 25 years ago to the day. This was after almost three decades of the concrete barricade cutting through the heart of Berlin and splitting the city in two. Today, Berlin is once again divided, this time by an 11-foot-tall wall of illuminated balloons.

The Lichtgrenze (translation: “border of light”) will stretch for 10 miles along the same path as the original 96-mile structure. The 8,000 balloons will begin at Bornholmer Street border crossing, one of the former checkpoints between East and West Germany, and snake their way through Berlin’s city center to the Oberbaum Bridge, blocking roads along the way and cutting off car access just like the Berlin Wall did decades ago.

Light artist Christopher Bauder and his filmmaker brother Marc began working on the concept for Lichtgrenze seven years ago, before the 20th anniversary of the wall coming down. But as you might imagine, building the equipment necessary to hoist and illuminate 8,000 balloons—not to mention getting approval to install them throughout a major metropolis—takes some time and bureaucratic elbow grease. The duo just couldn’t get it done in time.

This time, everything’s ready. Each of the 24-inch balloons sits atop a carbon fiber pole embedded with electronics and an LED light source. The balloons, glowing from below, are tethered to the poles. From the sky, it looks like a giant line of Pac-Man dots scattered across the German landscape.

As these visualizations show, it’s bound to be a powerful sight, not to mention a history lesson that Berliners and visitors alike will be forced to take notice of. Unlike a history textbook or an article on Wikipedia, art has the inherent benefit of showing, not telling. “This will trigger understanding of what it meant to have a wall in front of your door,” says Marc Bauder. “There were people coming out of their homes, and they couldn’t even cross the street because a wall was there.” Though people will be able to walk through Lichtgrenze, it will block them from passing by car.

Video screens dotted along the route show archival footage of the days before and after the wall fell. The film is meant to contextualize the spectacle, filling in the actual history and helping to illustrate how much has changed. “Everything the city is today is based on that the wall came down,” says Christopher, adding that his and many other artists’ careers were dependent on the fall of the wall. “There was a void, empty spaces that could be filled with ideas with galleries and studio spaces. There was unclear ownership of buildings—this was triggering what Berlin still stands for today. It’s important to bring back the memory of how this all started and what was actually before this.”

Read more.


Screenshot 4 2 14 11 48 AMEvery Tuesday is Art Tuesday here at Adafruit! Today we celebrate artists and makers from around the world who are designing innovative and creative works using technology, science, electronics and more. You can start your own career as an artist today with Adafruit’s conductive paints, art-related electronics kits, LEDs, wearables, 3D printers and more! Make your most imaginative designs come to life with our helpful tutorials from the Adafruit Learning System. And don’t forget to check in every Art Tuesday for more artistic inspiration here on the Adafruit Blog!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.