NEW PRODUCT – PRINTinZ Flexible 3D Printer Plate for Printrbot – 168mm x 237mm

2233_gifdemo

NEW PRODUCT – PRINTinZ Flexible 3D Printer Plate for Printrbot – 168mm x 237mm


Removing 3D printed parts from your 3D printer can be tough. Sometimes pieces get stuck to your 3D printing plate and their bottoms get stuck to your build plate. Over time, chiseling objects off can scratch and damage your plate – and get pretty annoying – so wouldn’t it be great if you could just bend the plate to pop off your parts? Introducing the PRINTinZ Flexible 3D Printer Plate for Printrbot!

This Printer Plate is designed to fit on machine beds that are close to 168mm x 237mm such as the Printrbot Simple Metal. Beware! If you’re looking to use this with the Printrbot Simple Kit – 1405 Model, then you’ll have to cut it down to size.

NewImage

This plate features a copper layer just under the outer skin (on both sides) that allows it to work with the Printrbot inductive proximity sensor for auto-leveling. We also have the 300mm x 300mm PRINTinZ flexible printer plate which is more ideal for the Lulzbot TAZ 4, or it can be cut smaller to fit other machines.

The PRINTinZ Printer Plate was developed as a superior alternative to the print surfaces being used on consumer 3D printers. If you’ve spent any time using a fused filament type of machine like our Printrbots or LulzBot, then you understand the demands on the print surface. The PRINTinZ Printer Plate works with all of our PLA and ABS filaments and can handle up to 100°C!

The plate is intended to be clipped directly onto the metal bed. Clips can be placed anywhere along the front edge, and small binder clips will fit on the rear edge at the very ends of the plate. Don’t put them closer to the middle of the plate or they will interefere with the machine frame.

For more information check Noe & Pedro’s learn guide 3D Printing on NinjaPlate: Flexible Build Plate.

In stock and shipping now!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.