MIT Mini Maker Faire 2014

Shane Colton shared a write up of his experiences attending and sharing his projects at the MIT Maker Faire 2014!

As expected from an MIT Maker Faire, there were lots of electric go-karts, Tesla coils, 3D printers, robots, and…

To this I contributed a set of long-time Maker Faire veteran projects (Pneu Scooter, 4pcb, Twitch) and a couple of new things (Talon v2 multirotor, Grasshopper3 Camera Rig). I always like to bring enough projects that if some don’t work or can’t be demonstrated, I have plenty of back-ups. Fixing stuff on the spot isn’t really possible when you have a constant stream of visitors. But I’ve been to a number of Maker Faires and decided the maximum number of projects I can keep track of is five. Especially since this time I had to be completely mobile, as in airline mobile.

The travel requirement meant that, unfortunately, tinyKart transport was out. (Although it is theoretically feasible to transport it for free via airline except for the battery and the seat…) But Pneu Scooter is eminently flyable and in fact has been all over the world in checked baggage already. It collapses to about 30″ long and weighs 18lbs. The battery is well within TSA travel limits for rechargeable lithium ion batteries installed in a device. Oh, and Twitch fits right between the deck and the handlebar…

Pneu Scooter and Twitch are really all I should ever bring to Maker Faires. They are low-maintenance and very reliable; both have survived years of abuse. In fact, Pneu Scooter is almost four year old now…still running the original motor and A123 battery pack, and still has a decent five-mile range. (I range-tested it before I left.) It’s been through a number of motor controllers and wheels though. Because the tires are tiny, it’s always been a pain in the ass accessing the Schrader valves with normal bike pumps….

Read more about the event and projects here.

Pasted Image 10 27 14 12 43 AM

Pasted Image 10 27 14 12 44 AM


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.