Monitor Water Flow During A Drought #NatureAndTechnology

Residential Water Usage Monitoring, Plumbing-Free from Pier 9 on Vimeo.

Save the world one drop at a time. Monitor water flow using a piezo and Pinoccio mesh networking. via instructables

Water is cheap, but California is in one of the worst droughts ever right now. Let’s face it: we can’t fix the drought. However, some CA residents are actively running out of drinking water. At the municipal level it’s difficult to enact immediate change, but we can change how we use our water at home. I decided it would be a good idea to focus my energies and the resources of my Artist Residency at Pier 9 towards something we can change: our habits. It’s possible to dramatically change our behavior simply by making us aware, but we simply don’t know where our water goes. A bill at the end of the month doesn’t give you much useful information, and it gives you the information a month too late. So I set out to solve the problem of not knowing where our water goes on a realtime basis.

While searching for inspiration, I came across an awesome instructable by StaceyK, where you use a piezo sensor to listen to the water flowing out of a faucet or tap, and translate that vibration data to fluid flow. This gives you an accurate idea of how much water you are using with that specific device. It had a simple ambient display with LEDs that turned from green to red when you exceeded a specified water usage. I was inspired!

So I thought, why not place these all over your house? I didn’t want to stop at one faucet, I wanted a usage breakdown of an entire house. The Internet Of Things is rapidly developing, up to speed with residential water usage. I found a cool small company called Pinoccio: they have low-cost mesh networking devices that can relay data across a network and broadcast that to the web. So I set out to make it easy to get this information.

NewImage

Full tutorial


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.