EL Wire Marvin the Martian Costume #ElectronicHalloween

marvin the martian costume

Most Halloween festivities take place at night, and you want to make sure all the hard work you put into your costume can be seen – that makes using EL wire a fantastic idea. Instructables user richardsonmeg10 used EL wire to become a glowing Marvin the Martian. She thinks simple shapes like cartoons work best, and since she’s a mechanical engineer and works on Mars rovers, Marvin the Martian seemed like a good pick. She started with sketches to figure out the basic design and colors. Here’s how she made Marvin come to life:

I played with a few different techniques. For the mask, I used some 18 gauge steel wire to make the basic shape, then followed the shape with the EL wire, securing every few inches and critical points with zip ties. To bridge gaps, I used black electrical tape to block light from unwanted areas. For the top of the helmet, I needed some added stability, so I included a few tape wrapped Popsicle sticks. A 3-1 splitter allowed me to use white for the eyes, green for the helmet and yellow for the helmet topper and only 1 battery pack. A cheap hairband sewn to the wire proved to be enough to hold up the mask and provided a nice place to clip the power pack in the back, where it can be hidden behind my hair.

For the body I went with a different technique. A quick search of the local hardware store turned up some black mesh material, used as non-slip surface for inside kitchen cabinets. This provided a good combination of flexibility and structure, while having many tie down points for zip ties. The actual wire routing takes a bit of planning and art, but is easy to go back and refine by clipping a zip tie and re-securing elsewhere.

Everything then got attached to a black dress.

marvin the martian costume wip

Read more about the project at Instructables.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.