Roller Coaster track design

Sim

BuildIts in Progress: Roller Coaster Track Design. Half the fun in building a roller coaster is all the trig calcs!

The East Campus Roller Coaster happened, and was a great success.  Here’s some proof.  I didn’t get too many pictures of the construction process, since I was busy with the construction itself, so as I wait for other people’s photos to trickle in, here are the details on how the shape of the roller coaster’s track was designed.

To start off though, a brief back story about the roller coaster tradition and how I ended up being one of the people in charge of this year’s ‘coaster.

As far as I can tell, the first EC roller coaster, dubbed “8.01: The Ride” was built in 2004 (making this the 10th anniversary coaster).  The last roller coaster, “The Reverse Cowgirl” was in 2010, and had to be taken down prematurely since they weren’t permitted.  So since then, EC has avoided roller coasters.

I’ve been thinking about the roller coaster since rush last year.  Pretty early on I was joined by Jaguar and then Wesley, hall-mates and fellow Mech E. 16’s.  During the fall and winter, we started thinking about general track shape and construction method, and as soon as EC’s Rush Chairs were elected near the beginning of spring semester 2014, we started talking with them about getting a roller coaster approved.

This post will cover track design.  A construction post will come later.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.