Researchers Develop Solar Cells From Old Car Batteries #SolarPower

NewImage

Researchers develop solar cells from old car batteries. by Lisa Winter via IFScience

When clean energy is involved, there’s nothing quite as sweet as killing two environmentally-hazardous birds with one stone. Scientists at MIT have developed a technique that can create a solar cell from old car batteries. Not only are car batteries a great source of the materials needed to create the solar cell, but repurposing them also prevents toxic chemicals like lead from entering the environment when the batteries are thrown away. The research was led by Angela Belcher and Paula Hammond, and the paper was published in the journal Energy and Environmental Science.

Recent study has revealed that organolead halide perovskite is capable of making photovoltaic cells that are nearly as good as solar cells developed from silicon. Over the last 5 years, perovskite-based cells ballooned in efficiency from 3.8-19.3%. The team at MIT recognized that car batteries are a great source of the lead they need for their cells, and in only two years, their idea had been turned into a cell with good efficiency.

The vast majority of automotive batteries get recycled in the United States, and most of the lead from each old battery is used in new batteries. However, as technology progresses and the majority of batteries are made of safer materials, such as lithium ion batteries, there won’t be an immediate use for the lead in the batteries that are collected. There is a chance that the batteries could get discarded into landfills, where they could pose a huge pollution risk.

“Once the battery technology evolves, over 200 million lead-acid batteries will potentially be retired in the United States, and that could cause a lot of environmental issues,” Belcher explained in a press release.

Such a huge stockpile of resources poses great potential for use in these solar cells. Obtaining perovskite from raw ore for solar cells can create toxic byproducts, but recycling the lead from old car batteries acts as a safer source of materials. The solar panels will safely encase the lead, minimizing any chance of pollution while generating clean, reliable electricity.

“The process to encapsulate them will be the same as for polymer cells today,” co-author Po-Yen Chen added. “That technology can be easily translated.”

Another great aspect to this technology is that the lead from one battery can go a long way. Each panel only needs a layer that is half a micrometer thick, so each battery can make enough panels to meet the needs of 30 American families. After the panels have been used for several years and need to be replaced, the perovskite can be recycled into new panels without diminished efficiency or new environmental threat.

“It is important that we consider the life cycles of the materials in large-scale energy systems,” Hammond says. “And here we believe the sheer simplicity of the approach bodes well for its commercial implementation.”

Read more


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.