NEW PRODUCTS – Mini Solderless Breadboards – 2×4 Points / 2×8 Points

2017 2018

NEW PRODUCTS – Mini Solderless Breadboards2×4 Points / 2×8 Points


NewImage

Mini Solderless Breadboard – 2×4 Points

Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 2×4 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to have a couple points. In our example photo, we put a chip and some jumper wires in the breadboard, but you can use anything with 0.1″ spaced header.

Comes with one 18mm x 8mm x 8mm piece of solder-less breadboard. There are two white posts on the bottom for PCB positioning. In our example we snapped those off and soldered two of them into our Perma-Proto.

In stock and shipping now!

NewImage

Mini Solderless Breadboard – 2×8 Points

Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 2×8 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to have a couple points. In our example photo, we put a Trinket in the breadboard, but you can use anything with 0.1″ spaced header.

Comes with one 29mm x 8mm x 8mm piece of solder-less breadboard. There are two white posts on the bottom for PCB positioning. In our example we snapped those off and soldered two of them into our Perma-Proto.

In stock and shipping now!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.