August 7, 2014 AT 9:58 am

Make a Hiccup Costume and Train Dragons

Hiccup costume

Matt Castiglione saw Hiccup’s costume from How to Train Your Dragon 2 and knew he had to make it. He had the best possible attitude: he didn’t know how to sew or alter foam or anything, but he didn’t let that stop him. He figured it out. As he worked, he documented the entire process and shared it on Lifted Geek. The whole how-to is worth reading because it shows what a new cosplayer is capable of. He built practice pieces first for both the helmet and breastplate before creating final versions from Worbla and foam – specifically EVA foam floor mats. Here’s how he crafted the leather breastplate:

Next was the …leather breastplate? This one was tricky because making a paper or fabric pattern doesn’t work that well when your final material is 1/2in thick and doesn’t stretch. I had lots of trouble getting the foam in the shape I wanted it to. I tried to make patterns and after the first attempt I learned to cut them around at least an inch bigger on every edge and slowly trim everything down. There were a few weak points where the vest joined, particularly under the arms and on the back under the collar where I had to cut out a long upside down “V” to fit the flying fin sleeve in. Adding a 1in wide and 1/4in thick rectangle of foam over the seam on the inside increased the strength immensely. Putting the collar on was a bit odd, the collar stay pattern I found online easily but I had to cut out the correct angle on the vest for the it to sit right and not push against my throat.

On the back of the chest armor (for the extendable fin sleeve I) rounded out a strip of floor mat and covered that in two layers of 1/8 craft foam and used a razor blade to slice an opening into the top. Mounted that on some foam that was bigger than the upside down “V” on the back of the armor and contact cemented the thing on, using hot glue to get the edges to it wouldn’t have a chance to pull up. At this time the vest construction was complete but the foam was still nice and neat. While the 1/2inch thickness is great for durability and cartoonish look it was also thick enough to keep its own shape, which did not look like leather shaped to someone’s body.

hiccup wip

Get all the details on making this costume at Lifted Geek.

Top photo by Kevin Free Photography


“D is for Diode” – Circuit Playground Episode 4 is out now! CLICK HERE TO WATCH!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground”Adafruit’s Apps!



1 Comment

  1. COOL! thanks for sharing this! we appreciate the support!

    PS: I’m Justin Prince, co-Founder of Lifted Geek

Sorry, the comment form is closed at this time.