Robot Jellyfish Takes To The Air #Biomimicry

Robot jellyfish takes to the air via Philip Ball at nature.com

Its transparent wings fixed to a delicate wire framework recall the diaphanous, veined wings of an insect. But when the flying machine rises gracefully into the air, the undulations of its conical form resemble nothing so much as a jellyfish swimming through water, the device’s electrical power lead trailing like a tentacle. It is, in short, like no other flying machine you have seen before.

This contraption1, built by applied mathematicians Leif Ristroph and Stephen Childress of New York University, is not the first small ornithopter — a flying machine capable of hovering by a flapping-wing motion, such as that of dragonflies and hummingbirds. But what distinguishes Ristroph and Childress’s craft from those such as the flapping insectoid robots reported by researchers last year2 is that it can remain stable in flight using the movement of its wings alone, without the need for additional stabilizers or complex feedback control loops to avoid flipping over.

The jellyfish-like ornithopter has four droplet-shaped wings of Mylar plastic film about 5 cm wide, arranged in a cone. The wings are connected to an articulated carbon-fibre framework driven by a tiny motor (see video below), and the whole machine weighs just 2.1 grams in total. It can execute forward flight and stable hovering, and can right itself automatically from tilting. The researchers say that the motion of the wings generates a downward jet, as do the undulations of a jellyfish bell. The absence of this strategy among flying animals, they say, remains a mystery. The work is reported today in Journal of the Royal Society Interface1.

Read More


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.