Reverse-engineering the technology of D-Day on its 70th anniversary

NewImage

Popular Science has a great story on the French firm that is making digital versions of World War II machines and infrastructure.

The June 6th, 1944 invasion of Normandy by British, American, and Canadian allied forces was the largest invasion in history. In the 70 years since then, it turns out we’ve forgotten most of the engineering that actually made it possible. 3D software design firm Dassault Systèmes set about to apply the computer tools of today, which they use to design modern airliners and cars, to recreate the past. The ambitious project that started modeling machines from D-Day this year and wants to have the full equipment of the invasion modeled by 2019, in time for the invasion’s 75th anniversary.

Why redesign the old machines? Because here was a moment where engineering skill under pressure truly changed history. “Engineering people are here to make the dream come true,” Mehdi Tayoubi, a Strategy VP for Dassault Systèmes told Popular Science, before continuing, “but then the world was in a nightmare. And the solution was to remove the nightmare, to come back to the dream. They were leaving the nightmare.”

NewImage

The team selected three technologies to recreate. Two of these directly carried troops into battle. They were the Waco CG-4A Hadrian glider, which silently carried troops into battle and beyond German lines, and the Higgins Boat, which carried troops from ship to shore in D-Day and allowed them to directly storm the beaches. What is left is under water, and is eroding after 70 years under water. “Everything that has been made with wood,” Tayoubi says, “like the Waco glider or the Higgins boat. We don’t have any more 100 percent original Higgins boats left in the world. Even the big boats in the water are starting to disappear.” If they waited till the 100th anniversary of the invasion, 30 years from now, there might not be enough left to piece together a digital reconstruction of the boats.

The third technology Dassault chose to design was the Mulberry harbor. Among the biggest challenges of the invasion was supplying the force once they’d established a beachhead. The harbor was built in parts across England, and then floated across in parts and assembled on the beach out of pontoons and flexible steel roads. “They were going to bring up a harbor to a place there was no harbor, and this was the first time in history where this had been done. And this harbor was the most active harbor in the world for a long time. Floating pontoons had to be invented for Mulberry B,” Tayoubi said.

For all three technologies, Dassault Systèmes scanned under water, using 3-D mapping tools to gather information on the harbor, boats, gliders, and other wrecked artifacts. These, combined with what was left of original blueprints, made it possible for the team to set out rebuilding the designs, and the scans will allow them to recreate more pieces of invasion technology in the future.

Read the full story here.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.