April 9, 2014 AT 2:00 am

Glimmer the Mermaid: Beautiful LED Mermaid Tail using #Adafruit Neopixels! #WearableWednesday

NewImage

The Arduino blog posted this awesome mermaid costume by Erin St. Blaine. Check out her site for more gorgeous photos!

I call her Glimmer the Mermaid. :)

I made the LED swimmable mermaid seashells at the end of 2013, and wore them to the NC Merfest convention and they were a huge hit. When I got home, I decided the shells needed a light-up tail to complement them. The rabbit-hole opened up, and I dove right in.

The end result is absolutely stunning, and I am completely delighted with it. This was the most learning-intensive and difficult and frustrating project I’ve attempted in.. well, since college, I think. I have had to learn so much in so many different fields, and I’ve encountered so many amazing people and communities along the way.

This tail uses about 180 Adafruit Neopixels and an Arduino Micro to control them. It’s got a bluetooth feature — I can control it with my android tablet and change the animations and brightness of the lights. I plan to add audio sensors and possibly motion or color sensors as well (that’ll be phase two, I think).

Read more.

Fire Pixie Happenings Glimmer the Mermaid New tail creation and show offering



Featured Adafruit Products!

NewImage

Flora RGB Smart NeoPixel version 2 – Pack of 4: What’s a wearable project without LEDs? Our favorite part of the Flora platform is these tiny smart pixels. Designed specifically for wearables, these updated Flora NeoPixels have ultra-cool technology: these ultra-bright LEDs have a constant-current driver cooked right into the LED package! The pixels are chainable – so you only need 1 pin/wire to control as many LEDs as you like. They’re easy to sew, and the chainable design means no crossed threads. Read more.


NewImage

Adafruit NeoPixel Digital RGB LED Weatherproof Strip 60 LED -1m: You thought it couldn’t get better than our world-famous 32-LED-per-meter Digital LED strip but we will prove you wrong! You wanted twice the LEDs? We got it (well, its 1.875 times as many but that’s within a margin of error). You wanted thinner strips? Now only 12.5 mm wide, 10 mm if you remove the strip from the casing. You wanted less noticable strip color – this strip has white-colored flex PCB, which will be less visible against white-painted walls. This is the strip with white flex PCB, its identical to the black 60 LED/meter except it has a different color mask on the flex strip Read more.


NewImage

Adafruit GEMMA – Miniature wearable electronic platform: Love FLORA but want a bite-sized version? Look no further, GEMMA is a tiny wearable platform board with a lot of might in a 1″ diameter package. Powered by a Attiny85 and programmable with an Arduino IDE over USB, you’ll be able to realize any wearable project!

We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don’t want to give up your Flora and you aren’t willing to take apart the project you worked so hard to design. It’s our lowest-cost sewable controller! Read more.


Flora breadboard is Every Wednesday is Wearable Wednesday here at Adafruit! We’re bringing you the blinkiest, most fashionable, innovative, and useful wearables from around the web and in our own original projects featuring our wearable Arduino-compatible platform, FLORA. Be sure to post up your wearables projects in the forums or send us a link and you might be featured here on Wearable Wednesday!

Related

“D is for Diode” – Circuit Playground Episode 4 is out now! CLICK HERE TO WATCH!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground”Adafruit’s Apps!



1 Comment

  1. Aaaah! I’m famous!!

    Thanks so much for sharing my project guys.. I’ve been so inspired by Wearable Wednesdays and couldn’t have even dreamed of this project without all your awesome tutorials and incredible support forums. And of course all your super fun products. (Hi. My name is Glimmer the Mermaid, and I’m an Adafruit Addict.)

    -Erin

Sorry, the comment form is closed at this time.