April 7, 2014 AT 12:00 pm

ATTiny85 Arc Reactor Project

Finished perfboard in case

Zack shared with us his simple ATTiny85 Arc Reactor project:

Something I was making for Halloween. It has a potentiometer that you turn to switch the mode of the LEDs from flicker, pules, or solid. I used an arduino to program the ATTiny85. Ones I finished it I ended up giving it to a friend so I am not 100% sure on the capacitors. Anything close to 450uF should be fine and depending on the power supply you may not need them at all.

Part List:

  • 2 resisters (10 Ohms hook to LEDs and 470 Ohms hooked to potentiometer)
  • 10k Ohm Potentiometer
  • LM7805C 5 volt regulator
  • 2 small Capacitors (I think I used 450uF)
  • ATTiny85 and 8-Pin IC socket
  • PC Board terminal
  • 8 white LEDs
  • Round ProtoBoard

Read More.

Back of perfboard

Related

“D is for Diode” – Circuit Playground Episode 4 is out now! CLICK HERE TO WATCH!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground”Adafruit’s Apps!



No Comments

No comments yet.

Sorry, the comment form is closed at this time.