We built an autonomous RC vehicle using 4 of the Sharp IR sensors and they work great! Thanks Adafruit for such great customer support and quick delivery. Here is the result.
The objective was to create a robot that can recognize, track, and follow a specified color object as well as have the ability to avoid obstacles in its way.
The Nexus S device connects to the IOIO board via Bluetooth, and uses the smartphone’s camera in conjunction with OpenCV and the external IR sensors to control the vehicle.
The robot consists of the following components:
- An android Nexus S smartphone
- An IOIO-OTG board
- An Arduino proto shield
- An 1/18 RC Mastadon truck with brushless motor
- An USB Micro Bluetooth Adapter
- A 25C 2S 1500mAh 7.4V LiPO
- Four(4) IR sensors
- A Lynx B – Pan and Tilt Kit (with 2 Hitec 422 servos)
- A Xbee shield for Arduino with an RN42-XV Bluetooth Module to communicate with laptop (optional). Mostly used to tune up the ESC PWMs and the pan/tilt PID.
Total purchase cost was just under $400 and that includes the phone; which was purchased used on eBay.
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
No comments yet.
Sorry, the comment form is closed at this time.