Arduino-powered laser harp lets you make your own techno music #ArduinoD14

This is such a cool project: A laser harp that you can play techno music on built by Stephen Hobley. Hack n Mod posted the story on how it works.

Ever wanted to make your own techno music, but are tired of the standard midi controller? Well, you could build a harp (of all instruments) out of lasers and then play it by breaking the beams of light. See how it’s done.

The harp is connected to the software synthesizer, the TAOS sensor array sits on the floor in its own stand. The array above the harp is just made up of mirrors for added p’zazz.

How it works:

Basically an Arduino connects to a 12-bit DAC chip (TLV5618) using the SPI 3 wire interface. It sends numbers on a timer interrupt to the DAC to specify where the beams are, 0, 455, 900, etc… all the way up to 4095 for 10 beams. It holds each position for about 500uS (half a millisecond) and switches laser blanking on (or is that “off”) for this time. When it reaches the end it brings the mirror back to the start position. The output of the DAC chip is 0-5V – this is then converted to -5v / +5v using a TL082 Opamp chip from Radio shack. Finally it’s passed through a Balanced Line Driver chip to give the full (-/+) 10v ptp) differential signal required by the mirror (laser galvanometer) amplifier.

Read more.


Arduino adafruit industries blog

March 29th is Arduino Day 2014! Arduino day is “a worldwide event bringing together Arduino people and projects. It’s 24 hours full of events – both official and independent, anywhere around the world – where people interested in Arduino can meet, share their experiences, and learn more.” Adafruit will be celebrating with 24 hours of Arduino posts on our blog as well as a special Saturday night LIVE show with Massimo Banzi, co-founder and CEO of Arduino. Join us Saturday, March 29th at 7 PM EST to celebrate Arduino Day 2014! Be sure to check out our extensive learning system tutorials on Arduino as well as our Arduino blog coverage and products.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.