Obi-Wan’s Lightsaber Build

lightsabers

If you’re going to cosplay as a Jedi, it’s only fitting that you play the part by building your own lightsabers. You don’t have to travel to a galaxy far, far away to get the crystal, and you can find parts to build the hilt right here on Earth. RPF user teecrooz purchased lightsaber parts and assembled them and added some weathering to make them as close as possible to Obi-Wan’s lightsaber:

I have a steel emitter which I blued and then burnished with steel wool (just did this today, so I’m not sure if I’m done or how much more work I’ll do on it at this point). For the grenade section, I soaked this in water, buried it in the yard, removed most of the rust with steel wool, let it sit around for a bit, kicked it around the driveway, blued the steel, burnished it with steel wool and did some weathering with a ball peen hammer. The brass was soaked in “Easy Off” oven cleaner and rubbed with steel wool until I was happy with the finish. I just started on the clamp today. I’ve drilled some holes and added one of Phillip’s bubble strips, but there is still plenty of work left to do until I’m happy with it. The booster is one of Russ’ anodized aluminum pieces. I’ve knocked it around a bit to remove some of the black and add a few dents, but it probably could use some more work. The tap has made it through unharmed up until now. The entire piece is held together by one of simplyprops adapters.

Read more at The RPF.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



1 Comment

  1. That’s a nice casing. I prefer sonic screwdrivers myself – but the work done to make this "real" should be respected.

    The next question is: what will you put inside it?

    It would be great to see this in daily use. Optometrist’s tonometer, opthalmoscope, otoscope. Flashlight or electric toothbrush [I’ve suggested all these for sonic screwdriver, too]

    The "best" I can think of, for sabre or sonic, is: crystal radio. There’s a "rocket radio" design that uses a sliding ferrite rod instead of a variable capacitor. You can also use headphone leads as an antenna. Shove an audio socket on the base. Extra points go to a worm thread system, to adjust the position of the ferrite rod in the coil.

Sorry, the comment form is closed at this time.