Adafruit’s Gemma, a very nice platform a little over an inch in diameter, is ideal for small and wearable projects. The device is inexpensive and based on the ATTINY85 microcontroller. Adafruit has, once again, done an excellent job of designing a cool tool for the electronics hobbyist.
Small as this is, I found myself wanting to shrink the electronics footprint of a wearable circuit even more. I didn’t have a need for some of the Gemma extras such as USB connector or JST for LiPo battery. So, I decided to experiment a little to get a wearable circuit to the bare essentials.
I already had in my toolkit the Adafruit USBtinyISP programmer, and the Evil Mad Scientist ‘2313 Target Board with ZIF socket. This board has a simple jumper modification to allow it to be used with ATTINY45/85.
Every Wednesday is Wearable Wednesday here at Adafruit! We’re bringing you the blinkiest, most fashionable, innovative, and useful wearables from around the web and in our own original projects featuring our wearable Arduino-compatible platform, FLORA. Be sure to post up your wearables projects in the forums or send us a link and you might be featured here on Wearable Wednesday!
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
No comments yet.
Sorry, the comment form is closed at this time.