BREAKING NEWS: Here Come the Cubes! 3D Systems Reveals a Sub $1,000 Dual Extrusion Multi-material Printer #ces2014

Pasted Image 1 6 14 9 39 AM

Here Come the Cubes! 3D Systems Reveals a Sub $1,000 Dual Extrusion Multi-material Printer #ces2014. Covered by MAKE:

3D Systems has been busy. In early December they announced their acquisition of Village Plastics Co., a leading manufacturer of filament-based ABS, PLA and HIPS and last week they acquired Gentle Giant Studios, with a vast library of digital content. Today, they announced their latest Cube 3 and Cube Pro desktop 3D printers and Cubify 2.0, a consumer-focused platform for hosting licensed, branded 3D printable content for retail, merchandising or at home printing.

In our 2014 Ultimate Guide to 3D Printing, our testers made some recommendations to printer vendors, stating that “Automating functions like platform and nozzle leveling go a long way to solving the issues faced by all 3D printer users, particularly beginners.” We are pleased to see that 3D Systems has added an auto-leveling bed to the Cube 3.

Other features of the Cube 3 include: simultaneous multi-material and dual-color printing in ABS and PLA, meets IEC 60950 printer safety requirements (making it “kid friendly”), an “instant load” cartridge system, faster Wi-Fi and Bluetooth connectivity and boasts speeds that are “up to 2X faster than other alternatives.”

Like it’s predecessors, the Cube and Cube 2, the Cube 3 is closed-source, has a touchscreen interface and comes without a heated bed, using 3D Systems proprietary “Cube glue” to keep ABS prints adhered to the bed. The Cube 3 has a sleek updated look, a color touchscreen, and LED backlit panels that glow to illuminate prints in progress. It also has a finer print resolution or 75 microns and can print “on-the-go” using the new Cubify Print3D mobile app for iOS, Android, & Windows.

Until recently, there has been a steep drop off when entering the small, sub-$1,000 3D printer realm. By introducing a dual extrusion, multimaterial printing printer with an autoleveler for under $1,000, 3D Systems has set the bar at a whole new level for 2014….

See more of the MAKE CES coverage of 3D Systems here!

Pasted Image 1 6 14 9 40 AM 2

Pasted Image 1 6 14 9 51 AM


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.