Michael Curry: 3Dx2013 Year In Review #AdafruitTopTen #3DThursday #3DPrinting #3DScanning #3D

We reached out to a handful of 3D printing pioneers and designers featured on the Adafruit blog this past year for their thoughts on the year-in-review — and what we have to look forward to for 3D printing in 2014!

Michael Curry Dangerball 2

Michael Curry, aka “Skimbal,” is one of Thingiverse’s / desktop 3D printing’s iconic designers. He swirls together humor/pop culture and his deep passion to learn (and then teach) how machines work — and out of this collision has emerged a wide range of influential and often-cited printable projects such as the Gothic Cathedral Playset (new files here!) and the Turtle Shell Racers.

He has created a number of 3D printed robot projects to date that we have been unable to resist sharing (such as the photo above from a sneak peak of his Dangerball! maker-friendly printable spherical robot at this year’s World Maker Faire in New York), and as long as he keeps creating fantastic project after fantastic project, we don’t see any reason to stop this arrangement. 😉


Q: Top three printing moments from 2013?

Robohand:

I had the pleasure of being involved in this project during the early part of this year, helping to develop a simplified snap together derivative of the original Robohand design.  I’ve been nothing but amazed with the energy of the Robohand project.  The continuing innovations of the talented people who have become involved are a real testament to the power of distributed open source development.


Through a Scanner, Cosmo Wenman:

Cosmo Wenman has been around the 3d printing world for the last year and a half.  Now supported by Autodesk, he is moving forward with his goal to make high quality photogrammetry captures of freely available to 3d printing community.


Simpson

The Peachy Printer The First 100 3D Printer Scanner by Rinnovated Design Kickstarter 3

The Rep Rap Simpson and the Peachy Printer:

At the beginning of this year it looked like the basic technology of desktop 3D printing was settled.  Well that was wrong.  2013 proved there is still plenty of room for innovation in 3d printing hardware. 

The neither of these machines are fiercely practical, but they both challenge the underlying assumption of what it takes to be a 3d printer.


Q: What’s a project you shared this year?

MichaelCurry

Lego People Parting Gifts:

This year my long association with MakerBot Industries ended.  It was a happy parting, and I wanted to do something special for all the amazing people I was leaving behind.

So I made parting gifts, giant Lego people in various flavors of glorious cultural nerdiness.  Working quietly with the help of a few dedicated friends, I printed 170 giant lego people in 9 different flavors, and then handed them out on my last day.


Q: What are you most looking forward to for 3D Printing in 2014?

DIY Open Source CT Scanner

DIY Open Source CT Scanner, The Tricorder Project:

There has been a lot of talk about 3d scanning this year.  2013 saw the launch of the Digitizer, from Makerbot, the Sense, from 3D Systems and a slew of other primesense and photogrammetry based scanning solutions on Kickstarter and Indiegogo. All of these solutions function on the same principle. Take a hundreds of pictures from various angles around an object, then use clever math to reconstruct the 3d shape inside the computer.

I was asked over and over again this year if I was excited about 3d scanning.  And truthfully, I wasn’t.

Useful things in the real world are rarely solid blocks of plastic. Interior structures are important. A watch doesn’t work because its outside is shaped like a watch. It works because of the gears and parts hidden inside the watch all have precise geometries and functions. For a 3d scanner to be useful, it would have to be able to capture and reproduce not just the outer shape of the watch, but also it’s working interior structures.

All year I jokingly said that I would get excited when some came out with a low cost desktop CT scanner.

NOW I’m excited about 3d Scanning.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.