Raspberry Pi Battery Backup How-To @Raspberry_Pi #piday #raspberrypi

IMG_0739

George shares how to make a battery backup circuit for your RPi via repairhub.co.uk:

This is a step by step instructions on how to make a battery backup circuit for your Raspberry Pi computer. For more information about Raspberry Pi visit the Foundation’s website.

First I’d like to explain a little bit about what I tried to achieve with this design and also pros and cons of this approach. I’m using my Raspberry Pi as a backup device with two hard drives connected to it, to back up various online servers that I administer. I use automated backup scripts based on Rsnapshot, and also I’m using this particular Pi as an Apple time machine server. Because Raspberry Pi is a very low power device, I thought it would be possible to design a cheap backup power supply using a 9V rechargeable battery, and this way prevent any abrupt shutdowns during power cuts or when someone accidentally unplugs it from the mains. As an added feature it also will provide a convenient way to safely power the device off without adding a hardware button or logging-in remotely and issuing a shutdown. But what this circuit doesn’t currently do is monitor battery levels, nor provide any kind of low voltage cut off, but there is a time limit/delay after which it will automatically power off and disconnect the battery.

IMG_0747A

The finished circuit does the following:

  • Trickle charge the battery while on mains power
  • Send a signal to Pi GPIO pin when mains power is disconnected
  • issue a shutdown after a few minutes if power haven’t returned (Done via software)
  • disconnect the battery from the circuit after shutdown is completed (this is to prevent discharging the battery below its limit)
  • keep a log file with all the time stamps and alerts for mains power, shutdowns and restarts of the Pi

Check out the full tutorial here.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.