Alfred Einstein once famously said, “Time is an illusion.” We here at Adafruit are ready to make your illusion into a reality with our clocks and watches gift guide. A time honored tradition, our gift guides will do all the planning for you so you can spend your holidays relaxing. It’s about time you give the gift of time to those you love spending time with. Start planning out those gifts early and you won’t spend the time leading up to the holidays worrying about finding the time to get gifts! Enough with the puns. Onward!
Available At Adafruit
The Bulbdial Clock kit is based on an original design concept from IronicSans.com and developed at Evil Mad Scientist Laboratories. It works like an indoor sundial, but with three shadows of different length. You tell the time just like you do on a normal clock, by reading the positions of the hour, minute, and second hands. The bulbdial we are carrying comes with red, green and blue LEDs for the ‘hands’, a black/smoke laser-cut enclosure and a wall adapter. Basic electronic soldering skill is required, and you will need to provide basic soldering tools: a soldering iron + solder and small wire clippers. You will also need internet access to read or download our detailed assembly guide. No additional knowledge of electronics is presumed or required. Easy “through-hole” construction and clear, photo-heavy instructions are provided. Read More.
Ice Tube Clock kit – v1.1: This is our first clock kit design, made with a retro Russian display tube!
- Cool glowing blue tube with 8 digits, PM dot and alarm on/off indicator.
- Adjustable brightness
- Alarm with volume adjust
- Precision watch crystal keeps time with under 20ppm (0.0002%) error (Less than 2 seconds a day)
- Clear acrylic enclosure protects clock from you and you from clock
- Battery backup will let the clock keep the time for up to 2 weeks without power
- Selectable 12h or 24h display
- Displays day and date on button press
- 10 minute snooze
- Integrated boost converter so it can run off of standard DC wall adapters, works in any country regardless of mains power
- Great for desk or night table use, the clock measures 4.9″ x 2.9″ x 1.3″ (12.5cm x 7.4cm x 3.3cm)
- Completely open source hardware and software, ready to be hacked and modded!
Complete kit comes with a 110/220V 9VDC power supply (a $1 plug adapter from your local hardware store will allow it to be used worldwide), all components including PCB, vacuum fluorescent tube, backup battery and a clear acrylic enclosure. Assembly is required! This kit is made of through-hole components but is best built by someone with previous soldering experience as there are many parts and steps. Read More.
Solder:Time Desk Clock: Make a sleek full featured, conversation starting desk clock. The Solder Time Desk Clock (STDC) is a DIY soldering kit. You only need to provide some basic electronics tools; Solder iron, solder, screwdriver, some fine grit sandpaper and wire snips. We’ve pre-programmed the chip, so it’s ready to roll once assembled.
Itching to hack in some custom code or hardware? Bring it on! Designed with hack-a-bility in mind, the STDC is based on the same ATMega microprocessor used in the Arduino products. There are extra digital and analog pins broken-out, an open serial port as well as I2C all easily accessible within the case, as well as an integrated prototyping area on-board. Download the sketch from our web page, modify it, add extra hardware if that’s your thing, and WOW your friends (or the Internet) with your amazing add-ons. Read More.
FLORA NeoGeo Watch: Make your own LED timepiece! Use FLORA and its GPS module to tell time with a NeoPixel Ring. A leather cuff holds the circuit and hides the battery. The watch is chunky but still looks and feels great on tiny wrists!
The circuit sandwich becomes the face of the watch, and you’ll use a tactile switch to make a mode selector. The watch has timekeeping (one LED for hours and one for minutes), GPS navigation (customize your waypoint in the provided Arduino sketch), and compass modes. Read More.
Alpha Clock Five from Evil Mad Scientist Labs: Evil Mad Scientist Labs never disappoints with their fantastic kits and clocks. The Alpha Clock Five is no exception: An awesome alarm clock soldering kit– featuring five crazy-bright, crazy huge 2.3″ alphanumeric LED displays in red, a Chronodot RTC (for precise quartz timing, complete with battery backup) and a handsome laser-cut acrylic case.
These big 18-segment alphanumeric LED displays are notoriously difficult to drive– there are 54 LED elements inside each LED character and the different segments take different amounts of current. We’ve now made it easy to drive five at a time, and wrapped it all up in neat package with classic alarm-clock styling.
MONOCHRON® is a new clock kit from Adafruit! This easy kit is easily hackable to do whatever you wish, it’s a clock platform – have fun!
- 128×64 LCD (KS0108) – we special-ordered the black and white display!
- ATmega328 processor (we even stuck an ‘arduino’ stk500 bootloader on there too for hacking ease)
- Laser cut enclosure in black acrylic
- Beeping/blinking alarm with 10 minute snooze
- Battery backed-up real time clock (DS1307) keeps time even when power is lost for years
- European/US and 12/24 hour time display as well as date
- Completely open source hardware, all firmware, layout and CAD files are yours to mess with
- Plenty of space for mods, a prototyping area for soldering stuff in
Comes with: clock kit (includes all parts, programmed chips and LCD), coin battery, enclosure, 9VDC power supply for 220V or 110V
TIMESQUARE DIY Watch Kit: Show up stylish AND on time to any event with this awesome looking DIY watch. We have a few watch kits here at Adafruit but we finally have one that looks good and fits well, even for ladies and kids and others with smaller wrists and hands. Its got a 8×8 bit matrix display and a repurposed silicone watch band for a professional look.
64 LEDs light up to tell you the time in a variety of ways. Built into the kit are 3 different watch ‘faces’ – a scrolling marquee with time and date, a binary watch display (for geeks, robots and binary fans), and a moon phase display (for beach-combers, werewolves). There’s also a built in battery meter so you can check your battery life. Want to make your own watch? Easy! The microcontroller is an Arduino-compatible, all you need is an FTDI Friend and the Arduino IDE and you can design your own watch faces and upload them to the TIMESQUARE. Comes in blue, red, lime, white, and tangerine. Read More.
Gifts From Other Sites
ClockOS: Make a custom clock with this sleek open-source clock face. Made with 180 RGB LEDs and a computer that keeps track of time and sequencing. Beautiful, hackable, and customizable, this is a great gift for all your DIY design-geek friends! Read more.
E-Ink Watch from Central Standard Timing: These watches won’t be available until around Feburary but they would make an awesome gift for those people who don’t mind their gifts taking a little extra time (wink wink). This recently funded kickstarter project has so many cool features including a 10 minute charge time and a paper-thin battery. Pre-Order Now!
5 O’Clock Wall Clock from the MoMA Store: Perfect for the minimalist in your life, this clock is beautifully designed and full of whimsy.
Founded in 1979 by a team that included Tibor Kalman, a celebrated designer whose work is represented in the Museum’s collection, M&Co. is known for pushing the envelope with its functional, witty, and whimsical designs. This clock features only one numeral, which for many is the most important hour: 5 o’clock, signaling the end of the workday. The clock features a plastic face and case and quartz movement. One AA battery included.
Ice Cream Bunting Hand Embroidered Mini Wall Clock from themasonbee on Etsy: This adorable hand-embroidered clock is perfect for a child’s bedroom. Get one here or make your own version using an embroidery hoop. It’s a super easy project and comes out looking absolutely adorable. Check out the DIY tutorial here!
Present Time Karlsson DIY Cubic Wall Clock: DIY in the easiest sense of the word, this clock is ready for you to arrange its colors in any pattern you’d like! Simply place the main cube at a central point and arrange the other cubes around it in any shape or color pattern your heart desires. The cubes come with an adhesive film on the back so there’s no nail needed! Just stick ‘em to the wall in your favorite shape. Read More.
The Defusable Clock kit is an electronics kit that lets you build a scary looking clock that you can actually “defuse”. Only the electronics are included — you use your imagination to build the device you want! You can get ideas from the gallery of defusable clocks.
The Defusable Clock is a fully-functional alarm clock just like you’d expect (a normal beeping alarm, snooze alarm, etc.). But at any time you can press the big red button to start a scary countdown sequence exactly like bombs in Hollywood movies.
There are 4 wires across the top of the clock. You have 10 seconds to choose the correct wire to cut: one wire stops the countdown and saves the day, two have no effect, and one will “detonate” the device immediately. These role of each wire is randomly assigned when the detonate button is pressed, so it’s a new challenge every time.
Check it out in action below and read more here!
Here are your 2013 shipping deadlines for ordering from Adafruit. Please review our shipping section if you have specific questions on how and where we ship worldwide for this holiday season.
UPS ground (USA orders): Place orders by Friday 11am ET – December 13, 2013 – There is no guarantee that UPS Ground packages will arrive in time for Christmas.
UPS 3-day (USA orders): Place orders by Thursday 11am ET – December 19, 2013 – Arrive on 12/24/2013.
UPS 2-day (USA orders): Place orders by Friday 11am ET – December 20, 2013 – Arrive on 12/24/2013.
UPS overnight (USA orders): Place orders by Monday 11am ET – December 23, 2013 – Arrive on 12/24/2013.
UPS International: Place orders by Monday 11am ET – December 16, 2013. Can take up extra time due to worldwide delays and customs. Should arrive by 12/24/2013 or sooner.
Please note: We do not offer Saturday service for UPS.
Wednesday, Dec. 25, 2013, Christmas, no UPS pickup or delivery service.
Wednesday, Jan. 1, 2014, New Year’s Day, no UPS pickup or delivery service.
United States Postal Service, First Class and Priority (USA orders): Place orders by Friday – December 13, 2013 – Arrive by 12/24/2012 or sooner.
USPS First class mail international (International orders): Place orders by Friday – November 22, 2013. Can take up to 30 days ore more with worldwide delays and customs. Should arrive by 12/24/2013 or sooner, but not a trackable service cannot be guaranteed to arrive by 12/24/13.
USPS Express mail international(International orders): Place orders by Friday – December 13, 2013. Can take up to 15 days or more with worldwide delays and customs. Should arrive by 12/24/2013 or sooner.
Gift Certificates are always available at any time.
When in doubt contact us!Related
Sorry, the comment form is closed at this time.